[VLAN]: Clean up debugging and printks

[mv-sheeva.git] / net / 8021q / vlan_dev.c

diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index 50d8edcbb89739189501855f71691148900b6021..756a71c1f4a5f0c5081b838f55f673133b9fc05b 100644 (file)
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -60,9 +60,8 @@ static int vlan_dev_rebuild_header(struct sk_buff *skb)
                return arp_find(veth->h_dest, skb);
 #endif
        default:
-               printk(VLAN_DBG
-                      "%s: unable to resolve type %X addresses.\n",
-                      dev->name, ntohs(veth->h_vlan_encapsulated_proto));
+               pr_debug("%s: unable to resolve type %X addresses.\n",
+                        dev->name, ntohs(veth->h_vlan_encapsulated_proto));
 
                memcpy(veth->h_source, dev->dev_addr, ETH_ALEN);
                break;
@@ -142,11 +141,6 @@ int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
 
        vid = (vlan_TCI & VLAN_VID_MASK);
 
-#ifdef VLAN_DEBUG
-       printk(VLAN_DBG "%s: skb: %p vlan_id: %hx\n",
-               __FUNCTION__, skb, vid);
-#endif
-
        /* Ok, we will find the correct VLAN device, strip the header,
         * and then go on as usual.
         */
@@ -162,11 +156,8 @@ int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
        skb->dev = __find_vlan_dev(dev, vid);
        if (!skb->dev) {
                rcu_read_unlock();
-
-#ifdef VLAN_DEBUG
-               printk(VLAN_DBG "%s: ERROR: No net_device for VID: %i on dev: %s [%i]\n",
-                       __FUNCTION__, (unsigned int)(vid), dev->name, dev->ifindex);
-#endif
+               pr_debug("%s: ERROR: No net_device for VID: %u on dev: %s [%i]\n",
+                        __FUNCTION__, (unsigned int)vid, dev->name, dev->ifindex);
                kfree_skb(skb);
                return -1;
        }
@@ -186,11 +177,8 @@ int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
         */
        skb->priority = vlan_get_ingress_priority(skb->dev, ntohs(vhdr->h_vlan_TCI));
 
-#ifdef VLAN_DEBUG
-       printk(VLAN_DBG "%s: priority: %lu  for TCI: %hu (hbo)\n",
-               __FUNCTION__, (unsigned long)(skb->priority),
-               ntohs(vhdr->h_vlan_TCI));
-#endif
+       pr_debug("%s: priority: %u for TCI: %hu\n",
+                __FUNCTION__, skb->priority, ntohs(vhdr->h_vlan_TCI));
 
        /* The ethernet driver already did the pkt_type calculations
         * for us...
@@ -335,10 +323,8 @@ static int vlan_dev_hard_header(struct sk_buff *skb, struct net_device *dev,
        int build_vlan_header = 0;
        struct net_device *vdev = dev; /* save this for the bottom of the method */
 
-#ifdef VLAN_DEBUG
-       printk(VLAN_DBG "%s: skb: %p type: %hx len: %x vlan_id: %hx, daddr: %p\n",
-               __FUNCTION__, skb, type, len, VLAN_DEV_INFO(dev)->vlan_id, daddr);
-#endif
+       pr_debug("%s: skb: %p type: %hx len: %u vlan_id: %hx, daddr: %p\n",
+                __FUNCTION__, skb, type, len, VLAN_DEV_INFO(dev)->vlan_id, daddr);
 
        /* build vlan header only if re_order_header flag is NOT set.  This
         * fixes some programs that get confused when they see a VLAN device
@@ -410,9 +396,7 @@ static int vlan_dev_hard_header(struct sk_buff *skb, struct net_device *dev,
                        return -ENOMEM;
                }
                VLAN_DEV_INFO(vdev)->cnt_inc_headroom_on_tx++;
-#ifdef VLAN_DEBUG
-               printk(VLAN_DBG "%s: %s: had to grow skb.\n", __FUNCTION__, vdev->name);
-#endif
+               pr_debug("%s: %s: had to grow skb.\n", __FUNCTION__, vdev->name);
        }
 
        if (build_vlan_header) {
@@ -453,10 +437,8 @@ static int vlan_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
                /* This is not a VLAN frame...but we can fix that! */
                VLAN_DEV_INFO(dev)->cnt_encap_on_xmit++;
 
-#ifdef VLAN_DEBUG
-               printk(VLAN_DBG "%s: proto to encap: 0x%hx (hbo)\n",
-                       __FUNCTION__, htons(veth->h_vlan_proto));
-#endif
+               pr_debug("%s: proto to encap: 0x%hx\n",
+                        __FUNCTION__, htons(veth->h_vlan_proto));
                /* Construct the second two bytes. This field looks something
                 * like:
                 * usr_priority: 3 bits  (high bits)
@@ -477,14 +459,15 @@ static int vlan_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
                }
        }
 
-#ifdef VLAN_DEBUG
-       printk(VLAN_DBG "%s: about to send skb: %p to dev: %s\n",
+       pr_debug("%s: about to send skb: %p to dev: %s\n",
                __FUNCTION__, skb, skb->dev->name);
-       printk(VLAN_DBG "  %2hx.%2hx.%2hx.%2xh.%2hx.%2hx %2hx.%2hx.%2hx.%2hx.%2hx.%2hx %4hx %4hx %4hx\n",
-              veth->h_dest[0], veth->h_dest[1], veth->h_dest[2], veth->h_dest[3], veth->h_dest[4], veth->h_dest[5],
-              veth->h_source[0], veth->h_source[1], veth->h_source[2], veth->h_source[3], veth->h_source[4], veth->h_source[5],
-              veth->h_vlan_proto, veth->h_vlan_TCI, veth->h_vlan_encapsulated_proto);
-#endif
+       pr_debug("  " MAC_FMT " " MAC_FMT " %4hx %4hx %4hx\n",
+                veth->h_dest[0], veth->h_dest[1], veth->h_dest[2],
+                veth->h_dest[3], veth->h_dest[4], veth->h_dest[5],
+                veth->h_source[0], veth->h_source[1], veth->h_source[2],
+                veth->h_source[3], veth->h_source[4], veth->h_source[5],
+                veth->h_vlan_proto, veth->h_vlan_TCI,
+                veth->h_vlan_encapsulated_proto);
 
        stats->tx_packets++; /* for statics only */
        stats->tx_bytes += skb->len;
@@ -596,7 +579,6 @@ int vlan_dev_set_vlan_flag(const struct net_device *dev,
                }
                return 0;
        }
-       printk(KERN_ERR "%s: flag %i is not valid.\n", __FUNCTION__, flag);
        return -EINVAL;
 }