rinfo->flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
if (sta->last_rx_rate_flag & RX_FLAG_SHORT_GI)
rinfo->flags |= RATE_INFO_FLAGS_SHORT_GI;
- if (sta->last_rx_rate_flag & RX_FLAG_80MHZ)
+ if (sta->last_rx_rate_vht_flag & RX_VHT_FLAG_80MHZ)
rinfo->flags |= RATE_INFO_FLAGS_80_MHZ_WIDTH;
- if (sta->last_rx_rate_flag & RX_FLAG_80P80MHZ)
+ if (sta->last_rx_rate_vht_flag & RX_VHT_FLAG_80P80MHZ)
rinfo->flags |= RATE_INFO_FLAGS_80P80_MHZ_WIDTH;
- if (sta->last_rx_rate_flag & RX_FLAG_160MHZ)
+ if (sta->last_rx_rate_vht_flag & RX_VHT_FLAG_160MHZ)
rinfo->flags |= RATE_INFO_FLAGS_160_MHZ_WIDTH;
}
/* TODO: make hostapd tell us what it wants */
sdata->smps_mode = IEEE80211_SMPS_OFF;
sdata->needed_rx_chains = sdata->local->rx_chains;
- sdata->radar_required = params->radar_required;
mutex_lock(&local->mtx);
+ sdata->radar_required = params->radar_required;
err = ieee80211_vif_use_channel(sdata, ¶ms->chandef,
IEEE80211_CHANCTX_SHARED);
mutex_unlock(&local->mtx);
int err;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ sdata_assert_lock(sdata);
/* don't allow changing the beacon while CSA is in place - offset
* of channel switch counter may change
struct probe_resp *old_probe_resp;
struct cfg80211_chan_def chandef;
+ sdata_assert_lock(sdata);
+
old_beacon = sdata_dereference(sdata->u.ap.beacon, sdata);
if (!old_beacon)
return -ENOENT;
ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband,
params->vht_capa, sta);
+ if (params->opmode_notif_used) {
+ /* returned value is only needed for rc update, but the
+ * rc isn't initialized here yet, so ignore it
+ */
+ __ieee80211_vht_handle_opmode(sdata, sta,
+ params->opmode_notif,
+ band, false);
+ }
+
if (ieee80211_vif_is_mesh(&sdata->vif)) {
#ifdef CONFIG_MAC80211_MESH
u32 changed = 0;
if (!roc)
return -ENOMEM;
+ /*
+ * If the duration is zero, then the driver
+ * wouldn't actually do anything. Set it to
+ * 10 for now.
+ *
+ * TODO: cancel the off-channel operation
+ * when we get the SKB's TX status and
+ * the wait time was zero before.
+ */
+ if (!duration)
+ duration = 10;
+
roc->chan = channel;
roc->duration = duration;
roc->req_duration = duration;
/* otherwise actually kick it off here (for error handling) */
- /*
- * If the duration is zero, then the driver
- * wouldn't actually do anything. Set it to
- * 10 for now.
- *
- * TODO: cancel the off-channel operation
- * when we get the SKB's TX status and
- * the wait time was zero before.
- */
- if (!duration)
- duration = 10;
-
ret = drv_remain_on_channel(local, sdata, channel, duration, type);
if (ret) {
kfree(roc);
static int ieee80211_start_radar_detection(struct wiphy *wiphy,
struct net_device *dev,
- struct cfg80211_chan_def *chandef)
+ struct cfg80211_chan_def *chandef,
+ u32 cac_time_ms)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
- unsigned long timeout;
int err;
mutex_lock(&local->mtx);
if (err)
goto out_unlock;
- timeout = msecs_to_jiffies(IEEE80211_DFS_MIN_CAC_TIME_MS);
ieee80211_queue_delayed_work(&sdata->local->hw,
- &sdata->dfs_cac_timer_work, timeout);
+ &sdata->dfs_cac_timer_work,
+ msecs_to_jiffies(cac_time_ms));
out_unlock:
mutex_unlock(&local->mtx);
return new_beacon;
}
-void ieee80211_csa_finalize_work(struct work_struct *work)
+void ieee80211_csa_finish(struct ieee80211_vif *vif)
+{
+ struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+
+ ieee80211_queue_work(&sdata->local->hw,
+ &sdata->csa_finalize_work);
+}
+EXPORT_SYMBOL(ieee80211_csa_finish);
+
+static void ieee80211_csa_finalize(struct ieee80211_sub_if_data *sdata)
{
- struct ieee80211_sub_if_data *sdata =
- container_of(work, struct ieee80211_sub_if_data,
- csa_finalize_work);
struct ieee80211_local *local = sdata->local;
int err, changed = 0;
- sdata_lock(sdata);
- /* AP might have been stopped while waiting for the lock. */
- if (!sdata->vif.csa_active)
- goto unlock;
-
- if (!ieee80211_sdata_running(sdata))
- goto unlock;
+ sdata_assert_lock(sdata);
- sdata->radar_required = sdata->csa_radar_required;
mutex_lock(&local->mtx);
+ sdata->radar_required = sdata->csa_radar_required;
err = ieee80211_vif_change_channel(sdata, &changed);
mutex_unlock(&local->mtx);
if (WARN_ON(err < 0))
- goto unlock;
+ return;
if (!local->use_chanctx) {
local->_oper_chandef = sdata->csa_chandef;
ieee80211_hw_config(local, 0);
}
- ieee80211_bss_info_change_notify(sdata, changed);
-
sdata->vif.csa_active = false;
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP:
err = ieee80211_assign_beacon(sdata, sdata->u.ap.next_beacon);
- if (err < 0)
- goto unlock;
-
- changed |= err;
kfree(sdata->u.ap.next_beacon);
sdata->u.ap.next_beacon = NULL;
- ieee80211_bss_info_change_notify(sdata, err);
+ if (err < 0)
+ return;
+ changed |= err;
break;
case NL80211_IFTYPE_ADHOC:
- ieee80211_ibss_finish_csa(sdata);
+ err = ieee80211_ibss_finish_csa(sdata);
+ if (err < 0)
+ return;
+ changed |= err;
break;
#ifdef CONFIG_MAC80211_MESH
case NL80211_IFTYPE_MESH_POINT:
err = ieee80211_mesh_finish_csa(sdata);
if (err < 0)
- goto unlock;
+ return;
+ changed |= err;
break;
#endif
default:
WARN_ON(1);
- goto unlock;
+ return;
}
+ ieee80211_bss_info_change_notify(sdata, changed);
+
ieee80211_wake_queues_by_reason(&sdata->local->hw,
IEEE80211_MAX_QUEUE_MAP,
IEEE80211_QUEUE_STOP_REASON_CSA);
cfg80211_ch_switch_notify(sdata->dev, &sdata->csa_chandef);
-
-unlock:
- sdata_unlock(sdata);
}
-int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev,
- struct cfg80211_csa_settings *params)
+void ieee80211_csa_finalize_work(struct work_struct *work)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- struct ieee80211_local *local = sdata->local;
- struct ieee80211_chanctx_conf *chanctx_conf;
- struct ieee80211_chanctx *chanctx;
- struct ieee80211_if_mesh __maybe_unused *ifmsh;
- int err, num_chanctx;
-
- lockdep_assert_held(&sdata->wdev.mtx);
-
- if (!list_empty(&local->roc_list) || local->scanning)
- return -EBUSY;
+ struct ieee80211_sub_if_data *sdata =
+ container_of(work, struct ieee80211_sub_if_data,
+ csa_finalize_work);
- if (sdata->wdev.cac_started)
- return -EBUSY;
+ sdata_lock(sdata);
+ /* AP might have been stopped while waiting for the lock. */
+ if (!sdata->vif.csa_active)
+ goto unlock;
- if (cfg80211_chandef_identical(¶ms->chandef,
- &sdata->vif.bss_conf.chandef))
- return -EINVAL;
+ if (!ieee80211_sdata_running(sdata))
+ goto unlock;
- rcu_read_lock();
- chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
- if (!chanctx_conf) {
- rcu_read_unlock();
- return -EBUSY;
- }
+ ieee80211_csa_finalize(sdata);
- /* don't handle for multi-VIF cases */
- chanctx = container_of(chanctx_conf, struct ieee80211_chanctx, conf);
- if (chanctx->refcount > 1) {
- rcu_read_unlock();
- return -EBUSY;
- }
- num_chanctx = 0;
- list_for_each_entry_rcu(chanctx, &local->chanctx_list, list)
- num_chanctx++;
- rcu_read_unlock();
-
- if (num_chanctx > 1)
- return -EBUSY;
+unlock:
+ sdata_unlock(sdata);
+}
- /* don't allow another channel switch if one is already active. */
- if (sdata->vif.csa_active)
- return -EBUSY;
+static int ieee80211_set_csa_beacon(struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_csa_settings *params,
+ u32 *changed)
+{
+ int err;
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP:
- sdata->csa_counter_offset_beacon =
- params->counter_offset_beacon;
- sdata->csa_counter_offset_presp = params->counter_offset_presp;
sdata->u.ap.next_beacon =
cfg80211_beacon_dup(¶ms->beacon_after);
if (!sdata->u.ap.next_beacon)
return -ENOMEM;
+ /*
+ * With a count of 0, we don't have to wait for any
+ * TBTT before switching, so complete the CSA
+ * immediately. In theory, with a count == 1 we
+ * should delay the switch until just before the next
+ * TBTT, but that would complicate things so we switch
+ * immediately too. If we would delay the switch
+ * until the next TBTT, we would have to set the probe
+ * response here.
+ *
+ * TODO: A channel switch with count <= 1 without
+ * sending a CSA action frame is kind of useless,
+ * because the clients won't know we're changing
+ * channels. The action frame must be implemented
+ * either here or in the userspace.
+ */
+ if (params->count <= 1)
+ break;
+
+ sdata->csa_counter_offset_beacon =
+ params->counter_offset_beacon;
+ sdata->csa_counter_offset_presp = params->counter_offset_presp;
err = ieee80211_assign_beacon(sdata, ¶ms->beacon_csa);
if (err < 0) {
kfree(sdata->u.ap.next_beacon);
return err;
}
+ *changed |= err;
+
break;
case NL80211_IFTYPE_ADHOC:
if (!sdata->vif.bss_conf.ibss_joined)
params->chandef.chan->band)
return -EINVAL;
- err = ieee80211_ibss_csa_beacon(sdata, params);
- if (err < 0)
- return err;
+ /* see comments in the NL80211_IFTYPE_AP block */
+ if (params->count > 1) {
+ err = ieee80211_ibss_csa_beacon(sdata, params);
+ if (err < 0)
+ return err;
+ *changed |= err;
+ }
+
+ ieee80211_send_action_csa(sdata, params);
+
break;
#ifdef CONFIG_MAC80211_MESH
- case NL80211_IFTYPE_MESH_POINT:
- ifmsh = &sdata->u.mesh;
-
- if (!ifmsh->mesh_id)
- return -EINVAL;
+ case NL80211_IFTYPE_MESH_POINT: {
+ struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
if (params->chandef.width != sdata->vif.bss_conf.chandef.width)
return -EINVAL;
params->chandef.chan->band)
return -EINVAL;
- ifmsh->chsw_init = true;
- if (!ifmsh->pre_value)
- ifmsh->pre_value = 1;
- else
- ifmsh->pre_value++;
+ if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_NONE) {
+ ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_INIT;
+ if (!ifmsh->pre_value)
+ ifmsh->pre_value = 1;
+ else
+ ifmsh->pre_value++;
+ }
- err = ieee80211_mesh_csa_beacon(sdata, params, true);
- if (err < 0) {
- ifmsh->chsw_init = false;
- return err;
+ /* see comments in the NL80211_IFTYPE_AP block */
+ if (params->count > 1) {
+ err = ieee80211_mesh_csa_beacon(sdata, params);
+ if (err < 0) {
+ ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE;
+ return err;
+ }
+ *changed |= err;
}
+
+ if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_INIT)
+ ieee80211_send_action_csa(sdata, params);
+
break;
+ }
#endif
default:
return -EOPNOTSUPP;
}
+ return 0;
+}
+
+int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_csa_settings *params)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_chanctx_conf *chanctx_conf;
+ struct ieee80211_chanctx *chanctx;
+ int err, num_chanctx, changed = 0;
+
+ sdata_assert_lock(sdata);
+
+ if (!list_empty(&local->roc_list) || local->scanning)
+ return -EBUSY;
+
+ if (sdata->wdev.cac_started)
+ return -EBUSY;
+
+ if (cfg80211_chandef_identical(¶ms->chandef,
+ &sdata->vif.bss_conf.chandef))
+ return -EINVAL;
+
+ rcu_read_lock();
+ chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
+ if (!chanctx_conf) {
+ rcu_read_unlock();
+ return -EBUSY;
+ }
+
+ /* don't handle for multi-VIF cases */
+ chanctx = container_of(chanctx_conf, struct ieee80211_chanctx, conf);
+ if (chanctx->refcount > 1) {
+ rcu_read_unlock();
+ return -EBUSY;
+ }
+ num_chanctx = 0;
+ list_for_each_entry_rcu(chanctx, &local->chanctx_list, list)
+ num_chanctx++;
+ rcu_read_unlock();
+
+ if (num_chanctx > 1)
+ return -EBUSY;
+
+ /* don't allow another channel switch if one is already active. */
+ if (sdata->vif.csa_active)
+ return -EBUSY;
+
+ err = ieee80211_set_csa_beacon(sdata, params, &changed);
+ if (err)
+ return err;
+
sdata->csa_radar_required = params->radar_required;
if (params->block_tx)
sdata->csa_chandef = params->chandef;
sdata->vif.csa_active = true;
- ieee80211_bss_info_change_notify(sdata, err);
- drv_channel_switch_beacon(sdata, ¶ms->chandef);
+ if (changed) {
+ ieee80211_bss_info_change_notify(sdata, changed);
+ drv_channel_switch_beacon(sdata, ¶ms->chandef);
+ } else {
+ /* if the beacon didn't change, we can finalize immediately */
+ ieee80211_csa_finalize(sdata);
+ }
return 0;
}
static int ieee80211_tdls_mgmt(struct wiphy *wiphy, struct net_device *dev,
u8 *peer, u8 action_code, u8 dialog_token,
- u16 status_code, const u8 *extra_ies,
- size_t extra_ies_len)
+ u16 status_code, u32 peer_capability,
+ const u8 *extra_ies, size_t extra_ies_len)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
return 0;
}
-struct cfg80211_ops mac80211_config_ops = {
+const struct cfg80211_ops mac80211_config_ops = {
.add_virtual_intf = ieee80211_add_iface,
.del_virtual_intf = ieee80211_del_iface,
.change_virtual_intf = ieee80211_change_iface,