goto out_unlock;
}
- __ieee80211_key_free(key);
+ __ieee80211_key_free(key, true);
ret = 0;
out_unlock:
sta_info_flush_defer(vlan);
sta_info_flush_defer(sdata);
rcu_barrier();
- list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list)
+ list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) {
sta_info_flush_cleanup(vlan);
+ ieee80211_free_keys(vlan);
+ }
sta_info_flush_cleanup(sdata);
+ ieee80211_free_keys(sdata);
sdata->vif.bss_conf.enable_beacon = false;
clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state);
mask |= BIT(NL80211_STA_FLAG_ASSOCIATED);
if (set & BIT(NL80211_STA_FLAG_AUTHENTICATED))
set |= BIT(NL80211_STA_FLAG_ASSOCIATED);
+ } else if (test_sta_flag(sta, WLAN_STA_TDLS_PEER)) {
+ /*
+ * TDLS -- everything follows authorized, but
+ * only becoming authorized is possible, not
+ * going back
+ */
+ if (set & BIT(NL80211_STA_FLAG_AUTHORIZED)) {
+ set |= BIT(NL80211_STA_FLAG_AUTHENTICATED) |
+ BIT(NL80211_STA_FLAG_ASSOCIATED);
+ mask |= BIT(NL80211_STA_FLAG_AUTHENTICATED) |
+ BIT(NL80211_STA_FLAG_ASSOCIATED);
+ }
}
ret = sta_apply_auth_flags(local, sta, mask, set);
if (ieee80211_vif_is_mesh(&sdata->vif)) {
#ifdef CONFIG_MAC80211_MESH
u32 changed = 0;
- if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED) {
+
+ if (params->sta_modify_mask & STATION_PARAM_APPLY_PLINK_STATE) {
switch (params->plink_state) {
case NL80211_PLINK_ESTAB:
if (sta->plink_state != NL80211_PLINK_ESTAB)
/* nothing */
break;
}
- } else {
- switch (params->plink_action) {
- case PLINK_ACTION_OPEN:
- changed |= mesh_plink_open(sta);
- break;
- case PLINK_ACTION_BLOCK:
- changed |= mesh_plink_block(sta);
- break;
- }
+ }
+
+ switch (params->plink_action) {
+ case NL80211_PLINK_ACTION_NO_ACTION:
+ /* nothing */
+ break;
+ case NL80211_PLINK_ACTION_OPEN:
+ changed |= mesh_plink_open(sta);
+ break;
+ case NL80211_PLINK_ACTION_BLOCK:
+ changed |= mesh_plink_block(sta);
+ break;
}
if (params->local_pm)
* defaults -- if userspace wants something else we'll
* change it accordingly in sta_apply_parameters()
*/
- sta_info_pre_move_state(sta, IEEE80211_STA_AUTH);
- sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC);
+ if (!(params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))) {
+ sta_info_pre_move_state(sta, IEEE80211_STA_AUTH);
+ sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC);
+ }
err = sta_apply_parameters(local, sta, params);
if (err) {
}
/*
- * for TDLS, rate control should be initialized only when supported
- * rates are known.
+ * for TDLS, rate control should be initialized only when
+ * rates are known and station is marked authorized
*/
if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER))
rate_control_rate_init(sta);
}
static int ieee80211_change_station(struct wiphy *wiphy,
- struct net_device *dev,
- u8 *mac,
+ struct net_device *dev, u8 *mac,
struct station_parameters *params)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wiphy_priv(wiphy);
struct sta_info *sta;
struct ieee80211_sub_if_data *vlansdata;
+ enum cfg80211_station_type statype;
int err;
mutex_lock(&local->sta_mtx);
sta = sta_info_get_bss(sdata, mac);
if (!sta) {
- mutex_unlock(&local->sta_mtx);
- return -ENOENT;
+ err = -ENOENT;
+ goto out_err;
}
- /* in station mode, some updates are only valid with TDLS */
- if (sdata->vif.type == NL80211_IFTYPE_STATION &&
- (params->supported_rates || params->ht_capa || params->vht_capa ||
- params->sta_modify_mask ||
- (params->sta_flags_mask & BIT(NL80211_STA_FLAG_WME))) &&
- !test_sta_flag(sta, WLAN_STA_TDLS_PEER)) {
- mutex_unlock(&local->sta_mtx);
- return -EINVAL;
+ switch (sdata->vif.type) {
+ case NL80211_IFTYPE_MESH_POINT:
+ if (sdata->u.mesh.user_mpm)
+ statype = CFG80211_STA_MESH_PEER_USER;
+ else
+ statype = CFG80211_STA_MESH_PEER_KERNEL;
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ statype = CFG80211_STA_IBSS;
+ break;
+ case NL80211_IFTYPE_STATION:
+ if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER)) {
+ statype = CFG80211_STA_AP_STA;
+ break;
+ }
+ if (test_sta_flag(sta, WLAN_STA_AUTHORIZED))
+ statype = CFG80211_STA_TDLS_PEER_ACTIVE;
+ else
+ statype = CFG80211_STA_TDLS_PEER_SETUP;
+ break;
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_AP_VLAN:
+ statype = CFG80211_STA_AP_CLIENT;
+ break;
+ default:
+ err = -EOPNOTSUPP;
+ goto out_err;
}
+ err = cfg80211_check_station_change(wiphy, params, statype);
+ if (err)
+ goto out_err;
+
if (params->vlan && params->vlan != sta->sdata->dev) {
bool prev_4addr = false;
bool new_4addr = false;
vlansdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
- if (vlansdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
- vlansdata->vif.type != NL80211_IFTYPE_AP) {
- mutex_unlock(&local->sta_mtx);
- return -EINVAL;
- }
-
if (params->vlan->ieee80211_ptr->use_4addr) {
if (vlansdata->u.vlan.sta) {
- mutex_unlock(&local->sta_mtx);
- return -EBUSY;
+ err = -EBUSY;
+ goto out_err;
}
rcu_assign_pointer(vlansdata->u.vlan.sta, sta);
}
err = sta_apply_parameters(local, sta, params);
- if (err) {
- mutex_unlock(&local->sta_mtx);
- return err;
- }
+ if (err)
+ goto out_err;
- if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) && params->supported_rates)
+ /* When peer becomes authorized, init rate control as well */
+ if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) &&
+ test_sta_flag(sta, WLAN_STA_AUTHORIZED))
rate_control_rate_init(sta);
mutex_unlock(&local->sta_mtx);
ieee80211_recalc_ps(local, -1);
ieee80211_recalc_ps_vif(sdata);
}
+
return 0;
+out_err:
+ mutex_unlock(&local->sta_mtx);
+ return err;
}
#ifdef CONFIG_MAC80211_MESH
ifmsh->mesh_sp_id = setup->sync_method;
ifmsh->mesh_pp_id = setup->path_sel_proto;
ifmsh->mesh_pm_id = setup->path_metric;
+ ifmsh->user_mpm = setup->user_mpm;
ifmsh->security = IEEE80211_MESH_SEC_NONE;
if (setup->is_authenticated)
ifmsh->security |= IEEE80211_MESH_SEC_AUTHED;
conf->dot11MeshTTL = nconf->dot11MeshTTL;
if (_chg_mesh_attr(NL80211_MESHCONF_ELEMENT_TTL, mask))
conf->element_ttl = nconf->element_ttl;
- if (_chg_mesh_attr(NL80211_MESHCONF_AUTO_OPEN_PLINKS, mask))
+ if (_chg_mesh_attr(NL80211_MESHCONF_AUTO_OPEN_PLINKS, mask)) {
+ if (ifmsh->user_mpm)
+ return -EBUSY;
conf->auto_open_plinks = nconf->auto_open_plinks;
+ }
if (_chg_mesh_attr(NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, mask))
conf->dot11MeshNbrOffsetMaxNeighbor =
nconf->dot11MeshNbrOffsetMaxNeighbor;
struct ieee80211_sub_if_data *sdata,
struct ieee80211_channel *channel,
unsigned int duration, u64 *cookie,
- struct sk_buff *txskb)
+ struct sk_buff *txskb,
+ enum ieee80211_roc_type type)
{
struct ieee80211_roc_work *roc, *tmp;
bool queued = false;
roc->duration = duration;
roc->req_duration = duration;
roc->frame = txskb;
+ roc->type = type;
roc->mgmt_tx_cookie = (unsigned long)txskb;
roc->sdata = sdata;
INIT_DELAYED_WORK(&roc->work, ieee80211_sw_roc_work);
if (!duration)
duration = 10;
- ret = drv_remain_on_channel(local, sdata, channel, duration);
+ ret = drv_remain_on_channel(local, sdata, channel, duration, type);
if (ret) {
kfree(roc);
return ret;
*
* If it hasn't started yet, just increase the duration
* and add the new one to the list of dependents.
+ * If the type of the new ROC has higher priority, modify the
+ * type of the previous one to match that of the new one.
*/
if (!tmp->started) {
list_add_tail(&roc->list, &tmp->dependents);
tmp->duration = max(tmp->duration, roc->duration);
+ tmp->type = max(tmp->type, roc->type);
queued = true;
break;
}
/*
* In the offloaded ROC case, if it hasn't begun, add
* this new one to the dependent list to be handled
- * when the the master one begins. If it has begun,
+ * when the master one begins. If it has begun,
* check that there's still a minimum time left and
* if so, start this one, transmitting the frame, but
- * add it to the list directly after this one with a
+ * add it to the list directly after this one with
* a reduced time so we'll ask the driver to execute
* it right after finishing the previous one, in the
* hope that it'll also be executed right afterwards,
* effectively extending the old one.
* If there's no minimum time left, just add it to the
* normal list.
+ * TODO: the ROC type is ignored here, assuming that it
+ * is better to immediately use the current ROC.
*/
if (!tmp->hw_begun) {
list_add_tail(&roc->list, &tmp->dependents);
mutex_lock(&local->mtx);
ret = ieee80211_start_roc_work(local, sdata, chan,
- duration, cookie, NULL);
+ duration, cookie, NULL,
+ IEEE80211_ROC_TYPE_NORMAL);
mutex_unlock(&local->mtx);
return ret;
/* This will handle all kinds of coalescing and immediate TX */
ret = ieee80211_start_roc_work(local, sdata, chan,
- wait, cookie, skb);
+ wait, cookie, skb,
+ IEEE80211_ROC_TYPE_MGMT_TX);
if (ret)
kfree_skb(skb);
out_unlock:
projects / linux-beck.git / blobdiff