* IEEE80211_TX_CTL_CLEAR_PS_FILT control flag) when the next
* frame to this station is transmitted.
* @WLAN_STA_MFP: Management frame protection is used with this STA.
- * @WLAN_STA_SUSPEND: Set/cleared during a suspend/resume cycle.
- * Used to deny ADDBA requests (both TX and RX).
+ * @WLAN_STA_BLOCK_BA: Used to deny ADDBA requests (both TX and RX)
+ * during suspend/resume and station removal.
* @WLAN_STA_PS_DRIVER: driver requires keeping this station in
* power-save mode logically to flush frames that might still
* be in the queues
* @WLAN_STA_PSPOLL: Station sent PS-poll while driver was keeping
* station in power-save mode, reply when the driver unblocks.
- * @WLAN_STA_DISASSOC: Disassociation in progress.
- * This is used to reject TX BA session requests when disassociation
- * is in progress.
*/
enum ieee80211_sta_info_flags {
WLAN_STA_AUTH = 1<<0,
WLAN_STA_WDS = 1<<7,
WLAN_STA_CLEAR_PS_FILT = 1<<9,
WLAN_STA_MFP = 1<<10,
- WLAN_STA_SUSPEND = 1<<11,
+ WLAN_STA_BLOCK_BA = 1<<11,
WLAN_STA_PS_DRIVER = 1<<12,
WLAN_STA_PSPOLL = 1<<13,
- WLAN_STA_DISASSOC = 1<<14,
};
#define STA_TID_NUM 16
#define ADDBA_RESP_INTERVAL HZ
-#define HT_AGG_MAX_RETRIES (0x3)
+#define HT_AGG_MAX_RETRIES 0x3
-#define HT_AGG_STATE_INITIATOR_SHIFT (4)
-
-#define HT_ADDBA_REQUESTED_MSK BIT(0)
-#define HT_ADDBA_DRV_READY_MSK BIT(1)
-#define HT_ADDBA_RECEIVED_MSK BIT(2)
-#define HT_AGG_STATE_REQ_STOP_BA_MSK BIT(3)
-#define HT_AGG_STATE_INITIATOR_MSK BIT(HT_AGG_STATE_INITIATOR_SHIFT)
-#define HT_AGG_STATE_IDLE (0x0)
-#define HT_AGG_STATE_OPERATIONAL (HT_ADDBA_REQUESTED_MSK | \
- HT_ADDBA_DRV_READY_MSK | \
- HT_ADDBA_RECEIVED_MSK)
+#define HT_AGG_STATE_DRV_READY 0
+#define HT_AGG_STATE_RESPONSE_RECEIVED 1
+#define HT_AGG_STATE_OPERATIONAL 2
+#define HT_AGG_STATE_STOPPING 3
+#define HT_AGG_STATE_WANT_START 4
+#define HT_AGG_STATE_WANT_STOP 5
/**
* struct tid_ampdu_tx - TID aggregation information (Tx).
*
+ * @rcu_head: rcu head for freeing structure
* @addba_resp_timer: timer for peer's response to addba request
* @pending: pending frames queue -- use sta's spinlock to protect
- * @ssn: Starting Sequence Number expected to be aggregated.
* @dialog_token: dialog token for aggregation session
+ * @state: session state (see above)
+ * @stop_initiator: initiator of a session stop
+ *
+ * This structure is protected by RCU and the per-station
+ * spinlock. Assignments to the array holding it must hold
+ * the spinlock, only the TX path can access it under RCU
+ * lock-free if, and only if, the state has the flag
+ * %HT_AGG_STATE_OPERATIONAL set. Otherwise, the TX path
+ * must also acquire the spinlock and re-check the state,
+ * see comments in the tx code touching it.
*/
struct tid_ampdu_tx {
+ struct rcu_head rcu_head;
struct timer_list addba_resp_timer;
struct sk_buff_head pending;
- u16 ssn;
+ unsigned long state;
u8 dialog_token;
+ u8 stop_initiator;
};
/**
* @buf_size: buffer size for incoming A-MPDUs
* @timeout: reset timer value (in TUs).
* @dialog_token: dialog token for aggregation session
- * @shutdown: this session is being shut down due to STA removal
+ * @rcu_head: RCU head used for freeing this struct
+ *
+ * This structure is protected by RCU and the per-station
+ * spinlock. Assignments to the array holding it must hold
+ * the spinlock, only the RX path can access it under RCU
+ * lock-free. The RX path, since it is single-threaded,
+ * can even modify the structure without locking since the
+ * only other modifications to it are done when the struct
+ * can not yet or no longer be found by the RX path.
*/
struct tid_ampdu_rx {
+ struct rcu_head rcu_head;
struct sk_buff **reorder_buf;
unsigned long *reorder_time;
struct timer_list session_timer;
u16 buf_size;
u16 timeout;
u8 dialog_token;
- bool shutdown;
};
+/**
+ * struct sta_ampdu_mlme - STA aggregation information.
+ *
+ * @tid_rx: aggregation info for Rx per TID -- RCU protected
+ * @tid_tx: aggregation info for Tx per TID
+ * @addba_req_num: number of times addBA request has been sent.
+ * @dialog_token_allocator: dialog token enumerator for each new session;
+ * @work: work struct for starting/stopping aggregation
+ */
+struct sta_ampdu_mlme {
+ /* rx */
+ struct tid_ampdu_rx *tid_rx[STA_TID_NUM];
+ /* tx */
+ struct work_struct work;
+ struct tid_ampdu_tx *tid_tx[STA_TID_NUM];
+ u8 addba_req_num[STA_TID_NUM];
+ u8 dialog_token_allocator;
+};
+
+
/**
* enum plink_state - state of a mesh peer link finite state machine
*
PLINK_BLOCKED
};
-/**
- * struct sta_ampdu_mlme - STA aggregation information.
- *
- * @tid_state_rx: TID's state in Rx session state machine.
- * @tid_rx: aggregation info for Rx per TID
- * @tid_state_tx: TID's state in Tx session state machine.
- * @tid_tx: aggregation info for Tx per TID
- * @addba_req_num: number of times addBA request has been sent.
- * @dialog_token_allocator: dialog token enumerator for each new session;
- */
-struct sta_ampdu_mlme {
- /* rx */
- u8 tid_state_rx[STA_TID_NUM];
- struct tid_ampdu_rx *tid_rx[STA_TID_NUM];
- /* tx */
- u8 tid_state_tx[STA_TID_NUM];
- struct tid_ampdu_tx *tid_tx[STA_TID_NUM];
- u8 addba_req_num[STA_TID_NUM];
- u8 dialog_token_allocator;
-};
-
-
/**
* struct sta_info - STA information
*
* @rx_fragments: number of received MPDUs
* @rx_dropped: number of dropped MPDUs from this STA
* @last_signal: signal of last received frame from this STA
- * @last_noise: noise of last received frame from this STA
* @last_seq_ctrl: last received seq/frag number from this STA (per RX queue)
* @tx_filtered_count: number of frames the hardware filtered for this STA
* @tx_retry_failed: number of frames that failed retry
unsigned long rx_fragments;
unsigned long rx_dropped;
int last_signal;
- int last_noise;
__le16 last_seq_ctrl[NUM_RX_DATA_QUEUES];
/* Updated from TX status path only, no locking requirements */