]> git.karo-electronics.de Git - karo-tx-redboot.git/blobdiff - packages/devs/eth/arm/triton270/v2_0/cdl/triton270_91c111_drivers.cdl
Cleanup CVS ipmorted branch
[karo-tx-redboot.git] / packages / devs / eth / arm / triton270 / v2_0 / cdl / triton270_91c111_drivers.cdl
diff --git a/packages/devs/eth/arm/triton270/v2_0/cdl/triton270_91c111_drivers.cdl b/packages/devs/eth/arm/triton270/v2_0/cdl/triton270_91c111_drivers.cdl
deleted file mode 100755 (executable)
index 5055c37..0000000
+++ /dev/null
@@ -1,126 +0,0 @@
-# ====================================================================
-#
-#      triton270_91c111_drivers.cdl
-#
-#      Ethernet drivers - support for LAN91C111 ethernet controller
-#      on the Ka-RO TRITON board.
-#
-# ====================================================================
-#####ECOSGPLCOPYRIGHTBEGIN####
-## -------------------------------------------
-## This file is part of eCos, the Embedded Configurable Operating System.
-## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
-##
-## eCos is free software; you can redistribute it and/or modify it under
-## the terms of the GNU General Public License as published by the Free
-## Software Foundation; either version 2 or (at your option) any later version.
-##
-## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
-## WARRANTY; without even the implied warranty of MERCHANTABILITY or
-## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-## for more details.
-##
-## You should have received a copy of the GNU General Public License along
-## with eCos; if not, write to the Free Software Foundation, Inc.,
-## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-##
-## As a special exception, if other files instantiate templates or use macros
-## or inline functions from this file, or you compile this file and link it
-## with other works to produce a work based on this file, this file does not
-## by itself cause the resulting work to be covered by the GNU General Public
-## License. However the source code for this file must still be made available
-## in accordance with section (3) of the GNU General Public License.
-##
-## This exception does not invalidate any other reasons why a work based on
-## this file might be covered by the GNU General Public License.
-##
-## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
-## at http://sources.redhat.com/ecos/ecos-license/
-## -------------------------------------------
-#####ECOSGPLCOPYRIGHTEND####
-# ====================================================================
-######DESCRIPTIONBEGIN####
-#
-# Author(s):      Jordi Colomer <jco@ict.es>, usteinkohl
-# Contributors:   Jordi Colomer, usteinkohl
-# Date:           14th January 2003
-#
-#####DESCRIPTIONEND####
-#
-# ====================================================================
-
-cdl_package CYGPKG_DEVS_ETH_ARM_XSCALE_TRITON270_91C111 {
-
-    display       "TRITON SMC91C111 ethernet driver"
-
-    parent        CYGPKG_IO_ETH_DRIVERS
-    active_if    CYGPKG_IO_ETH_DRIVERS
-#    active_if     CYGPKG_HAL_ARM_XSCALE_TRITON_STK
-    
-
-    # chip wired in 16-bit mode, no EEPROM
-    implements    CYGHWR_NET_DRIVERS
-    implements    CYGHWR_NET_DRIVER_ETH0
-    implements    CYGINT_DEVS_ETH_SMSC_LAN91C111_REQUIRED
-    implements    CYGINT_DEVS_ETH_SMSC_LAN91C111_STATIC_ESA
-    
-    requires      CYGPKG_DEVS_ETH_SMSC_LAN91C111
-    description   "Ethernet driver for TRITON boards."
-
-    include_dir   cyg/io
-
-    define_proc {
-        puts $::cdl_system_header "/***** ethernet driver proc output start *****/"
-        puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_SMSC_LAN91C111_INL <cyg/io/devs_triton270_91c111.inl>"
-        puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_SMSC_LAN91C111_CFG <pkgconf/devs_eth_arm_xscale_triton270_91c111.h>"
-        puts $::cdl_system_header "/*****  ethernet driver proc output end  *****/"
-    }
-    
-    # Arguably this should do in the generic package
-    # but then there is a logic loop so you can never enable it.
-
-    cdl_interface CYGINT_DEVS_ETH_SMSC_LAN91C111_REQUIRED {
-        display   "SMSC LAN91C111 driver required"
-    }
-
-    cdl_option CYGDAT_DEVS_ETH_ARM_XSCALE_TRITON_NAME {
-        display       "Device name for the ethernet driver"
-        flavor        data
-        default_value {"\"eth0\""}
-        description   "
-            This option sets the name of the ethernet device for the
-            ethernet port."
-    }
-
-    cdl_option CYGDAT_DEVS_ETH_ARM_XSCALE_TRITON_ESA {
-        display       "The ethernet station address (MAC)"
-        flavor        data
-        default_value {"{0x00, 0x0c, 0xc6, 0x69, 0x00, 0x00}"}
-        description   "A static ethernet station address. 
-            Caution: Booting two systems with the same MAC on the same
-            network, will cause severe conflicts."
-        active_if     !CYGSEM_DEVS_ETH_ARM_XSCALE_TRITON_REDBOOT_ESA
-    }
-    
-     cdl_option CYGSEM_DEVS_ETH_ARM_XSCALE_TRITON_1WIRE_ESA {
-        display "Use the 1-WIRE device ESA (MAC address)"
-        default_value 1
-        flavor        bool
-        description   "
-            Use the ESA that is stored in the 1wire device instead of
-            a static ESA." 
-    }
-    
-
-    cdl_option CYGSEM_DEVS_ETH_ARM_XSCALE_TRITON_REDBOOT_ESA {
-        display "Use the RedBoot ESA (MAC address)"
-        default_value 0
-        flavor        bool
-        description   "
-            Use the ESA that is stored as a RedBoot variable instead of
-            a static ESA." 
-    }
-
-}
-
-# EOF triton_eth_drivers.cdl