X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=README;h=5980f6da85c6f5699ba27003b72a1c0dbeb7b343;hb=24b11ff594cba6f75eef0a2b921affa2ebf3bc69;hp=e290619a64e1ea4c20f1334b957efa2a03bf4744;hpb=01052b5c3249faa4f0315580279e0a95bdf2a63c;p=karo-tx-uboot.git

diff --git a/README b/README
index e290619a64..5980f6da85 100644
--- a/README
+++ b/README
@@ -702,6 +702,7 @@ The following options need to be configured:
 		do have ability to provide rudimentary version and machine
 		specific checks, but expect no product checks.
 		CONFIG_ARM_ERRATA_798870
+		CONFIG_ARM_ERRATA_801819
 
 - Tegra SoC options:
 		CONFIG_TEGRA_SUPPORT_NON_SECURE
@@ -1491,9 +1492,6 @@ The following options need to be configured:
 		Management command for E1000 devices.  When used on devices
 		with SPI support you can reprogram the EEPROM from U-Boot.
 
-		CONFIG_E1000_FALLBACK_MAC
-		default MAC for empty EEPROM after production.
-
 		CONFIG_EEPRO100
 		Support for Intel 82557/82559/82559ER chips.
 		Optional CONFIG_EEPRO100_SROM_WRITE enables EEPROM
@@ -1606,12 +1604,6 @@ The following options need to be configured:
 		Support for i2c bus TPM devices. Only one device
 		per system is supported at this time.
 
-			CONFIG_TPM_TIS_I2C_BUS_NUMBER
-			Define the the i2c bus number for the TPM device
-
-			CONFIG_TPM_TIS_I2C_SLAVE_ADDRESS
-			Define the TPM's address on the i2c bus
-
 			CONFIG_TPM_TIS_I2C_BURST_LIMITATION
 			Define the burst count bytes upper limit
 
@@ -1840,12 +1832,12 @@ The following options need to be configured:
 		This enables support for booting images which use the Android
 		image format header.
 
-		CONFIG_USB_FASTBOOT_BUF_ADDR
+		CONFIG_FASTBOOT_BUF_ADDR
 		The fastboot protocol requires a large memory buffer for
 		downloads. Define this to the starting RAM address to use for
 		downloaded images.
 
-		CONFIG_USB_FASTBOOT_BUF_SIZE
+		CONFIG_FASTBOOT_BUF_SIZE
 		The fastboot protocol requires a large memory buffer for
 		downloads. This buffer should be as large as possible for a
 		platform. Define this to the size available RAM for fastboot.
@@ -5202,6 +5194,18 @@ This firmware often needs to be loaded during U-Boot booting.
 - CONFIG_SYS_MEM_TOP_HIDE_MIN
 	Define minimum DDR size to be hided from top of the DDR memory
 
+Reproducible builds
+-------------------
+
+In order to achieve reproducible builds, timestamps used in the U-Boot build
+process have to be set to a fixed value.
+
+This is done using the SOURCE_DATE_EPOCH environment variable.
+SOURCE_DATE_EPOCH is to be set on the build host's shell, not as a configuration
+option for U-Boot or an environment variable in U-Boot.
+
+SOURCE_DATE_EPOCH should be set to a number of seconds since the epoch, in UTC.
+
 Building the Software:
 ======================