X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=README;h=c97ff0af0b6283057b53ba992682b7cbfdbc7831;hb=164922bd7c383a2c82739f8b080b2e0da801ec0d;hp=b99a4441582f21d14660e107e6106600265e6d80;hpb=6297872cd5de4705b6318778261b1f3f64a34c11;p=karo-tx-uboot.git diff --git a/README b/README index b99a444158..c97ff0af0b 100644 --- a/README +++ b/README @@ -139,7 +139,6 @@ Directory Hierarchy: /at91 Files specific to Atmel AT91RM9200 CPU /imx Files specific to Freescale MC9328 i.MX CPUs /s3c24x0 Files specific to Samsung S3C24X0 CPUs - /arm925t Files specific to ARM 925 CPUs /arm926ejs Files specific to ARM 926 CPUs /arm1136 Files specific to ARM 1136 CPUs /ixp Files specific to Intel XScale IXP CPUs @@ -706,6 +705,11 @@ The following options need to be configured: the "silent" environment variable. See doc/README.silent for more information. + CONFIG_SYS_CONSOLE_BG_COL: define the backgroundcolor, default + is 0x00. + CONFIG_SYS_CONSOLE_FG_COL: define the foregroundcolor, default + is 0xa0. + - Console Baudrate: CONFIG_BAUDRATE - in bps Select one of the baudrates listed in @@ -844,6 +848,7 @@ The following options need to be configured: CONFIG_CMD_ELF * bootelf, bootvx CONFIG_CMD_ENV_CALLBACK * display details about env callbacks CONFIG_CMD_ENV_FLAGS * display details about env flags + CONFIG_CMD_ENV_EXISTS * check existence of env variable CONFIG_CMD_EXPORTENV * export the environment CONFIG_CMD_EXT2 * ext2 command support CONFIG_CMD_EXT4 * ext4 command support @@ -945,10 +950,10 @@ The following options need to be configured: - Regular expression support: CONFIG_REGEX - If this variable is defined, U-Boot is linked against - the SLRE (Super Light Regular Expression) library, - which adds regex support to some commands, as for - example "env grep" and "setexpr". + If this variable is defined, U-Boot is linked against + the SLRE (Super Light Regular Expression) library, + which adds regex support to some commands, as for + example "env grep" and "setexpr". - Device tree: CONFIG_OF_CONTROL @@ -1028,7 +1033,6 @@ The following options need to be configured: - GPIO Support: CONFIG_PCA953X - use NXP's PCA953X series I2C GPIO - CONFIG_PCA953X_INFO - enable pca953x info command The CONFIG_SYS_I2C_PCA953X_WIDTH option specifies a list of chip-ngpio pairs that tell the PCA953X driver the number of @@ -1097,8 +1101,8 @@ The following options need to be configured: devices. CONFIG_SYS_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz) - The environment variable 'scsidevs' is set to the number of - SCSI devices found during the last scan. + The environment variable 'scsidevs' is set to the number of + SCSI devices found during the last scan. - NETWORK Support (PCI): CONFIG_E1000 @@ -1363,6 +1367,13 @@ The following options need to be configured: for your device - CONFIG_USBD_PRODUCTID 0xFFFF + Some USB device drivers may need to check USB cable attachment. + In this case you can enable following config in BoardName.h: + CONFIG_USB_CABLE_CHECK + This enables function definition: + - usb_cable_connected() in include/usb.h + Implementation of this function is board-specific. + - ULPI Layer Support: The ULPI (UTMI Low Pin (count) Interface) PHYs are supported via the generic ULPI layer. The generic layer accesses the ULPI PHY @@ -1988,22 +1999,83 @@ CBFS (Coreboot Filesystem) support offset CONFIG_SYS_FSL_I2C_SPEED for the i2c speed and CONFIG_SYS_FSL_I2C_SLAVE for the slave addr of the first bus. - - If your board supports a second fsl i2c bus, define + - If your board supports a second fsl i2c bus, define CONFIG_SYS_FSL_I2C2_OFFSET for the register offset CONFIG_SYS_FSL_I2C2_SPEED for the speed and CONFIG_SYS_FSL_I2C2_SLAVE for the slave address of the second bus. - drivers/i2c/tegra_i2c.c: - - activate this driver with CONFIG_SYS_I2C_TEGRA - - This driver adds 4 i2c buses with a fix speed from - 100000 and the slave addr 0! + - activate this driver with CONFIG_SYS_I2C_TEGRA + - This driver adds 4 i2c buses with a fix speed from + 100000 and the slave addr 0! - drivers/i2c/ppc4xx_i2c.c - activate this driver with CONFIG_SYS_I2C_PPC4XX - CONFIG_SYS_I2C_PPC4XX_CH0 activate hardware channel 0 - CONFIG_SYS_I2C_PPC4XX_CH1 activate hardware channel 1 + - drivers/i2c/i2c_mxc.c + - activate this driver with CONFIG_SYS_I2C_MXC + - define speed for bus 1 with CONFIG_SYS_MXC_I2C1_SPEED + - define slave for bus 1 with CONFIG_SYS_MXC_I2C1_SLAVE + - define speed for bus 2 with CONFIG_SYS_MXC_I2C2_SPEED + - define slave for bus 2 with CONFIG_SYS_MXC_I2C2_SLAVE + - define speed for bus 3 with CONFIG_SYS_MXC_I2C3_SPEED + - define slave for bus 3 with CONFIG_SYS_MXC_I2C3_SLAVE + If thoses defines are not set, default value is 100000 + for speed, and 0 for slave. + + - drivers/i2c/rcar_i2c.c: + - activate this driver with CONFIG_SYS_I2C_RCAR + - This driver adds 4 i2c buses + + - CONFIG_SYS_RCAR_I2C0_BASE for setting the register channel 0 + - CONFIG_SYS_RCAR_I2C0_SPEED for for the speed channel 0 + - CONFIG_SYS_RCAR_I2C1_BASE for setting the register channel 1 + - CONFIG_SYS_RCAR_I2C1_SPEED for for the speed channel 1 + - CONFIG_SYS_RCAR_I2C2_BASE for setting the register channel 2 + - CONFIG_SYS_RCAR_I2C2_SPEED for for the speed channel 2 + - CONFIG_SYS_RCAR_I2C3_BASE for setting the register channel 3 + - CONFIG_SYS_RCAR_I2C3_SPEED for for the speed channel 3 + - CONFIF_SYS_RCAR_I2C_NUM_CONTROLLERS for number of i2c buses + + - drivers/i2c/sh_i2c.c: + - activate this driver with CONFIG_SYS_I2C_SH + - This driver adds from 2 to 5 i2c buses + + - CONFIG_SYS_I2C_SH_BASE0 for setting the register channel 0 + - CONFIG_SYS_I2C_SH_SPEED0 for for the speed channel 0 + - CONFIG_SYS_I2C_SH_BASE1 for setting the register channel 1 + - CONFIG_SYS_I2C_SH_SPEED1 for for the speed channel 1 + - CONFIG_SYS_I2C_SH_BASE2 for setting the register channel 2 + - CONFIG_SYS_I2C_SH_SPEED2 for for the speed channel 2 + - CONFIG_SYS_I2C_SH_BASE3 for setting the register channel 3 + - CONFIG_SYS_I2C_SH_SPEED3 for for the speed channel 3 + - CONFIG_SYS_I2C_SH_BASE4 for setting the register channel 4 + - CONFIG_SYS_I2C_SH_SPEED4 for for the speed channel 4 + - CONFIG_SYS_I2C_SH_BASE5 for setting the register channel 5 + - CONFIG_SYS_I2C_SH_SPEED5 for for the speed channel 5 + - CONFIF_SYS_I2C_SH_NUM_CONTROLLERS for nummber of i2c buses + + - drivers/i2c/omap24xx_i2c.c + - activate this driver with CONFIG_SYS_I2C_OMAP24XX + - CONFIG_SYS_OMAP24_I2C_SPEED speed channel 0 + - CONFIG_SYS_OMAP24_I2C_SLAVE slave addr channel 0 + - CONFIG_SYS_OMAP24_I2C_SPEED1 speed channel 1 + - CONFIG_SYS_OMAP24_I2C_SLAVE1 slave addr channel 1 + - CONFIG_SYS_OMAP24_I2C_SPEED2 speed channel 2 + - CONFIG_SYS_OMAP24_I2C_SLAVE2 slave addr channel 2 + - CONFIG_SYS_OMAP24_I2C_SPEED3 speed channel 3 + - CONFIG_SYS_OMAP24_I2C_SLAVE3 slave addr channel 3 + - CONFIG_SYS_OMAP24_I2C_SPEED4 speed channel 4 + - CONFIG_SYS_OMAP24_I2C_SLAVE4 slave addr channel 4 + + - drivers/i2c/zynq_i2c.c + - activate this driver with CONFIG_SYS_I2C_ZYNQ + - set CONFIG_SYS_I2C_ZYNQ_SPEED for speed setting + - set CONFIG_SYS_I2C_ZYNQ_SLAVE for slave addr + additional defines: CONFIG_SYS_NUM_I2C_BUSES @@ -3192,9 +3264,9 @@ FIT uImage format: CONFIG_TPL_PAD_TO Image offset to which the TPL should be padded before appending the TPL payload. By default, this is defined as - CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined. - CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL - payload without any padding, or >= CONFIG_SPL_MAX_SIZE. + CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined. + CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL + payload without any padding, or >= CONFIG_SPL_MAX_SIZE. Modem Support: --------------