X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=arch%2Farm%2Fboot%2Fdts%2Fimx28-duckbill.dts;h=ce1a7effba3770ce8708cfb44ecae6e781d6a79f;hb=6a8007c83a7bc5ccfa02b425f7463dab3dce686a;hp=5f326c1c1850b349eeb6877e11a8e1cf491d19fb;hpb=f01387d2693813eb5271a3448e6a082322c7d75d;p=karo-tx-linux.git

diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts
index 5f326c1c1850..ce1a7effba37 100644
--- a/arch/arm/boot/dts/imx28-duckbill.dts
+++ b/arch/arm/boot/dts/imx28-duckbill.dts
@@ -25,9 +25,9 @@
 			ssp0: ssp@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
+				pinctrl-0 = <&mmc0_4bit_pins_a
 					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
+				bus-width = <4>;
 				vmmc-supply = <&reg_3p3v>;
 				status = "okay";
 			};
@@ -39,7 +39,7 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						MX28_PAD_ENET0_RX_CLK__GPIO_4_13 /* PHY Reset */
+						MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */
 					>;
 					fsl,drive-strength = <MXS_DRIVE_4mA>;
 					fsl,voltage = <MXS_VOLTAGE_HIGH>;
@@ -82,7 +82,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&mac0_pins_a>;
 			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio4 13 0>;
+			phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
 			phy-reset-duration = <100>;
 			status = "okay";
 		};
@@ -110,12 +110,12 @@
 
 		status {
 			label = "duckbill:green:status";
-			gpios = <&gpio3 5 0>;
+			gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
 		};
 
 		failure {
 			label = "duckbill:red:status";
-			gpios = <&gpio3 4 0>;
+			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };