X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=arch%2Farm%2Fmach-mvebu%2Finclude%2Fmach%2Fsoc.h;h=063d6ccabd88e983e81483de499b6c75b27f699c;hb=f61aefc150a30347db2d8aa2427b57d1c78e4357;hp=cb216bc2cc61d5c2a14139d4538afcaefa43f70a;hpb=6202953df4feca4bb564141a7efbc8c697531203;p=karo-tx-uboot.git

diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h
index cb216bc2cc..063d6ccabd 100644
--- a/arch/arm/mach-mvebu/include/mach/soc.h
+++ b/arch/arm/mach-mvebu/include/mach/soc.h
@@ -14,10 +14,14 @@
 #define SOC_MV78230_ID		0x7823
 #define SOC_MV78260_ID		0x7826
 #define SOC_MV78460_ID		0x7846
+#define SOC_88F6720_ID		0x6720
 #define SOC_88F6810_ID		0x6810
 #define SOC_88F6820_ID		0x6820
 #define SOC_88F6828_ID		0x6828
 
+/* A375 revisions */
+#define MV_88F67XX_A0_ID	0x3
+
 /* A38x revisions */
 #define MV_88F68XX_Z1_ID	0x0
 #define MV_88F68XX_A0_ID	0x4
@@ -33,7 +37,7 @@
 /* SOC specific definations */
 #define INTREG_BASE		0xd0000000
 #define INTREG_BASE_ADDR_REG	(INTREG_BASE + 0x20080)
-#if defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_ARMADA_3700)
 /*
  * The SPL U-Boot version still runs with the default
  * address for the internal registers, configured by
@@ -51,6 +55,7 @@
 #define MVEBU_L2_CACHE_BASE	(MVEBU_REGISTER(0x08000))
 #define CONFIG_SYS_PL310_BASE	MVEBU_L2_CACHE_BASE
 #define MVEBU_TWSI_BASE		(MVEBU_REGISTER(0x11000))
+#define MVEBU_TWSI1_BASE	(MVEBU_REGISTER(0x11100))
 #define MVEBU_MPP_BASE		(MVEBU_REGISTER(0x18000))
 #define MVEBU_GPIO0_BASE	(MVEBU_REGISTER(0x18100))
 #define MVEBU_GPIO1_BASE	(MVEBU_REGISTER(0x18140))
@@ -67,6 +72,8 @@
 #define MVEBU_SATA0_BASE	(MVEBU_REGISTER(0xa8000))
 #define MVEBU_NAND_BASE		(MVEBU_REGISTER(0xd0000))
 #define MVEBU_SDIO_BASE		(MVEBU_REGISTER(0xd8000))
+#define MVEBU_LCD_BASE		(MVEBU_REGISTER(0xe0000))
+#define MVEBU_DFX_BASE		(MVEBU_REGISTER(0xe4000))
 
 #define SOC_COHERENCY_FABRIC_CTRL_REG	(MVEBU_REGISTER(0x20200))
 #define MBUS_ERR_PROP_EN	(1 << 8)
@@ -86,6 +93,7 @@
 #define SPI_PUP_EN		BIT(5)
 
 #define MVEBU_CORE_DIV_CLK_CTRL(i)	(MVEBU_CLOCK_BASE + ((i) * 0x8))
+#define MVEBU_DFX_DIV_CLK_CTRL(i)	(MVEBU_DFX_BASE + 0x250 + ((i) * 0x4))
 #define NAND_ECC_DIVCKL_RATIO_OFFS	8
 #define NAND_ECC_DIVCKL_RATIO_MASK	(0x3F << NAND_ECC_DIVCKL_RATIO_OFFS)
 
@@ -105,7 +113,20 @@
 #define BOOTROM_ERR_MODE_MASK	(0xf << BOOTROM_ERR_MODE_OFFS)
 #define BOOTROM_ERR_MODE_UART	0x6
 
-#if defined(CONFIG_ARMADA_38X)
+#if defined(CONFIG_ARMADA_375)
+/* SAR values for Armada 375 */
+#define CONFIG_SAR_REG		(MVEBU_REGISTER(0xe8200))
+#define CONFIG_SAR2_REG		(MVEBU_REGISTER(0xe8204))
+
+#define SAR_CPU_FREQ_OFFS	17
+#define SAR_CPU_FREQ_MASK	(0x1f << SAR_CPU_FREQ_OFFS)
+
+#define BOOT_DEV_SEL_OFFS	3
+#define BOOT_DEV_SEL_MASK	(0x3f << BOOT_DEV_SEL_OFFS)
+
+#define BOOT_FROM_UART		0x30
+#define BOOT_FROM_SPI		0x38
+#elif defined(CONFIG_ARMADA_38X)
 /* SAR values for Armada 38x */
 #define CONFIG_SAR_REG		(MVEBU_REGISTER(0x18600))