X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=arch%2Farm%2Fmach-omap2%2Fboard-ldp.c;h=00d9b13b01c5938e0118ced2a8801595dede232f;hb=7590d1defdc720a97a9e186f45f529c4ae1b40f7;hp=07e1f731ffc72e62aa17670d02dababd3d8e1b6f;hpb=869fef41547db95df8523bf67845a21313709428;p=mv-sheeva.git

diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 07e1f731ffc..00d9b13b01c 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -38,6 +38,7 @@
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/gpmc.h>
+#include <mach/board-zoom.h>
 
 #include <asm/delay.h>
 #include <plat/control.h>
@@ -388,6 +389,38 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
+static struct mtd_partition ldp_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader-NAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "Boot Env-NAND",
+		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
+		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
+	},
+	{
+		.name		= "Kernel-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
+		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
+	},
+	{
+		.name		= "File System - NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
+		.size		= MTDPART_SIZ_FULL,	/* 96MB, 0x6000000 */
+	},
+
+};
+
 static void __init omap_ldp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -400,6 +433,8 @@ static void __init omap_ldp_init(void)
 	ads7846_dev_init();
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
+	board_nand_init(ldp_nand_partitions,
+		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS);
 
 	omap2_hsmmc_init(mmc);
 	/* link regulators to MMC adapters */