X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=arch%2Farm%2Fmach-omap2%2Fboard-omap3evm.c;fp=arch%2Farm%2Fmach-omap2%2Fboard-omap3evm.c;h=323c3809ce394fdcd98323d10aabefef07495064;hb=f2ec334db8d14ae3ec2e4bf8d974f75b8f772e26;hp=f76d9c0a47a1e83c8220977d75908c181899d53c;hpb=81e20d4d8d0317ecf1c7d193a52ab26cf74e1737;p=mv-sheeva.git

diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index f76d9c0a47a..323c3809ce3 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -31,6 +31,7 @@
 #include <linux/smsc911x.h>
 
 #include <linux/regulator/machine.h>
+#include <linux/mmc/host.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -42,6 +43,7 @@
 #include <plat/common.h>
 #include <plat/mcspi.h>
 #include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
@@ -300,13 +302,18 @@ static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
 	dvi_enabled = 0;
 }
 
+static struct panel_generic_dpi_data dvi_panel = {
+	.name			= "generic",
+	.platform_enable	= omap3_evm_enable_dvi,
+	.platform_disable	= omap3_evm_disable_dvi,
+};
+
 static struct omap_dss_device omap3_evm_dvi_device = {
 	.name			= "dvi",
-	.driver_name		= "generic_panel",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.driver_name		= "generic_dpi_panel",
+	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
-	.platform_enable	= omap3_evm_enable_dvi,
-	.platform_disable	= omap3_evm_disable_dvi,
 };
 
 static struct omap_dss_device *omap3_evm_dss_devices[] = {
@@ -370,7 +377,7 @@ static struct regulator_init_data omap3evm_vsim = {
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
-		.wires		= 4,
+		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= 63,
 	},
@@ -446,7 +453,7 @@ static struct twl4030_usb_data omap3evm_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
-static int board_keymap[] = {
+static uint32_t board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_DOWN),
 	KEY(0, 2, KEY_ENTER),
@@ -584,7 +591,7 @@ static int ads7846_get_pendown_state(void)
 	return !gpio_get_value(OMAP3_EVM_TS_GPIO);
 }
 
-struct ads7846_platform_data ads7846_config = {
+static struct ads7846_platform_data ads7846_config = {
 	.x_max			= 0x0fff,
 	.y_max			= 0x0fff,
 	.x_plate_ohms		= 180,
@@ -603,7 +610,7 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = {
 	.single_channel	= 1,	/* 0: slave, 1: master */
 };
 
-struct spi_board_info omap3evm_spi_board_info[] = {
+static struct spi_board_info omap3evm_spi_board_info[] = {
 	[0] = {
 		.modalias		= "ads7846",
 		.bus_num		= 1,
@@ -622,9 +629,9 @@ static void __init omap3_evm_init_irq(void)
 {
 	omap_board_config = omap3_evm_config;
 	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static struct platform_device *omap3_evm_devices[] __initdata = {
@@ -653,8 +660,6 @@ static struct omap_board_mux board_mux[] __initdata = {
 				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
-#else
-#define board_mux	NULL
 #endif
 
 static struct omap_musb_board_data musb_board_data = {
@@ -714,8 +719,6 @@ static void __init omap3_evm_init(void)
 
 MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,