X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=arch%2Fblackfin%2Fmach-bf527%2Fboards%2Fcm_bf527.c;fp=arch%2Fblackfin%2Fmach-bf527%2Fboards%2Fcm_bf527.c;h=2c31af7a320a7bd767749fc06f974db27db8c281;hb=690c12d2c8ca50e55a3f507059c780ecdb8fd83f;hp=645ba5c8077b108672818de20b143054a386aec3;hpb=f639011b4020a8230c8d09866f6eaadcb12e8dde;p=mv-sheeva.git

diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 645ba5c8077..2c31af7a320 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -273,13 +273,35 @@ static struct platform_device dm9000_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_RMII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_RMII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
 	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
 };
 
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
-	.dev.platform_data = &bfin_mii_bus,
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
 };
 #endif
 
@@ -342,8 +364,8 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) \
-	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -420,13 +442,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) \
-	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 	{
-		.modalias = "ad1836",
+		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.chip_select = 4,
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif