X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=arch%2Fmips%2FKconfig;h=653da62d0682b06bc0df0cf489dc1059a554faec;hb=65d517eb7224d24ee4206416161390f30d69e622;hp=83aa5fb8e8f147e8f956ef462b22c79964ce0bd2;hpb=6988f20fe04e9ef3aea488cb8ab57fbeb78e12f0;p=karo-tx-linux.git

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 83aa5fb8e8f1..653da62d0682 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -212,6 +212,24 @@ config MACH_JZ4740
 	select HAVE_PWM
 	select HAVE_CLK
 
+config LANTIQ
+	bool "Lantiq based platforms"
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select CEVT_R4K
+	select CSRC_R4K
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_MULTITHREADING
+	select SYS_HAS_EARLY_PRINTK
+	select ARCH_REQUIRE_GPIOLIB
+	select SWAP_IO_SPACE
+	select BOOT_RAW
+	select HAVE_CLK
+	select MIPS_MACHINE
+
 config LASAT
 	bool "LASAT Networks platforms"
 	select CEVT_R4K
@@ -736,6 +754,33 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
 		Hikari
 	  Say Y here for most Octeon reference boards.
 
+config NLM_XLR_BOARD
+	bool "Netlogic XLR/XLS based systems"
+	depends on EXPERIMENTAL
+	select BOOT_ELF32
+	select NLM_COMMON
+	select NLM_XLR
+	select SYS_HAS_CPU_XLR
+	select SYS_SUPPORTS_SMP
+	select HW_HAS_PCI
+	select SWAP_IO_SPACE
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select 64BIT_PHYS_ADDR
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select DMA_COHERENT
+	select NR_CPUS_DEFAULT_32
+	select CEVT_R4K
+	select CSRC_R4K
+	select IRQ_CPU
+	select ZONE_DMA if 64BIT
+	select SYNC_R4K
+	select SYS_HAS_EARLY_PRINTK
+	help
+	  Support for systems based on Netlogic XLR and XLS processors.
+	  Say Y here if you have a XLR or XLS based board.
+
 endchoice
 
 source "arch/mips/alchemy/Kconfig"
@@ -743,6 +788,7 @@ source "arch/mips/ath79/Kconfig"
 source "arch/mips/bcm63xx/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/jz4740/Kconfig"
+source "arch/mips/lantiq/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
 source "arch/mips/powertv/Kconfig"
@@ -752,6 +798,7 @@ source "arch/mips/txx9/Kconfig"
 source "arch/mips/vr41xx/Kconfig"
 source "arch/mips/cavium-octeon/Kconfig"
 source "arch/mips/loongson/Kconfig"
+source "arch/mips/netlogic/Kconfig"
 
 endmenu
 
@@ -774,14 +821,6 @@ config ARCH_SUPPORTS_OPROFILE
 	bool
 	default y if !MIPS_MT_SMTC
 
-config GENERIC_FIND_NEXT_BIT
-	bool
-	default y
-
-config GENERIC_FIND_BIT_LE
-	bool
-	default y
-
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -997,9 +1036,6 @@ config IRQ_GT641XX
 config IRQ_GIC
 	bool
 
-config IRQ_CPU_OCTEON
-	bool
-
 config MIPS_BOARDS_GEN
 	bool
 
@@ -1135,7 +1171,7 @@ config CPU_LOONGSON2E
 	  The Loongson 2E processor implements the MIPS III instruction set
 	  with many extensions.
 
-	  It has an internal FPGA northbridge, which is compatiable to
+	  It has an internal FPGA northbridge, which is compatible to
 	  bonito64.
 
 config CPU_LOONGSON2F
@@ -1359,8 +1395,6 @@ config CPU_SB1
 config CPU_CAVIUM_OCTEON
 	bool "Cavium Octeon processor"
 	depends on SYS_HAS_CPU_CAVIUM_OCTEON
-	select IRQ_CPU
-	select IRQ_CPU_OCTEON
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_SMP
@@ -1425,6 +1459,17 @@ config CPU_BMIPS5000
 	help
 	  Broadcom BMIPS5000 processors.
 
+config CPU_XLR
+	bool "Netlogic XLR SoC"
+	depends on SYS_HAS_CPU_XLR
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+	select WEAK_ORDERING
+	select WEAK_REORDERING_BEYOND_LLSC
+	select CPU_SUPPORTS_HUGEPAGES
+	help
+	  Netlogic Microsystems XLR/XLS processors.
 endchoice
 
 if CPU_LOONGSON2F
@@ -1555,6 +1600,9 @@ config SYS_HAS_CPU_BMIPS4380
 config SYS_HAS_CPU_BMIPS5000
 	bool
 
+config SYS_HAS_CPU_XLR
+	bool
+
 #
 # CPU may reorder R->R, R->W, W->R, W->W
 # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
@@ -2339,6 +2387,7 @@ config MMU
 
 config I8253
 	bool
+	select CLKSRC_I8253
 	select MIPS_EXTERNAL_TIMER
 
 config ZONE_DMA32