X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=arch%2Fmips%2FKconfig;h=71683a8533723866872de04f7194d07a28f33045;hb=1282ac407cf4c3eaeaddd8d776a7ffbd2b94c2e7;hp=e3aa5b0b4ef17771fbd2afa1557f29ee6a7a2b3d;hpb=790a2ee2427852cff50993c98f15ed88511e9af0;p=karo-tx-linux.git

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e3aa5b0b4ef1..71683a853372 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -5,6 +5,7 @@ config MIPS
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
 	select ARCH_USE_CMPXCHG_LOCKREF if 64BIT
+	select ARCH_USE_BUILTIN_BSWAP
 	select HAVE_CONTEXT_TRACKING
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_IDE
@@ -60,6 +61,8 @@ config MIPS
 	select SYSCTL_EXCEPTION_TRACE
 	select HAVE_VIRT_CPU_ACCOUNTING_GEN
 	select HAVE_IRQ_TIME_ACCOUNTING
+	select GENERIC_TIME_VSYSCALL
+	select ARCH_CLOCKSOURCE_DATA
 
 menu "Machine selection"
 
@@ -401,6 +404,28 @@ config MACH_PISTACHIO
 	help
 	  This enables support for the IMG Pistachio SoC platform.
 
+config MACH_XILFPGA
+	bool "MIPSfpga Xilinx based boards"
+	select ARCH_REQUIRE_GPIOLIB
+	select BOOT_ELF32
+	select BOOT_RAW
+	select BUILTIN_DTB
+	select CEVT_R4K
+	select COMMON_CLK
+	select CSRC_R4K
+	select IRQ_MIPS_CPU
+	select LIBFDT
+	select MIPS_CPU_SCACHE
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_ZBOOT_UART16550
+	select USE_OF
+	select USE_GENERIC_EARLY_PRINTK_8250
+	help
+	  This enables support for the IMG University Program MIPSfpga platform.
+
 config MIPS_MALTA
 	bool "MIPS Malta board"
 	select ARCH_MAY_HAVE_PC_FDC
@@ -424,6 +449,7 @@ config MIPS_MALTA
 	select MIPS_L1_CACHE_SHIFT_6
 	select PCI_GT64XXX_PCI0
 	select MIPS_MSC
+	select SMP_UP if SMP
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
@@ -449,6 +475,8 @@ config MIPS_MALTA
 	select SYS_SUPPORTS_ZBOOT
 	select USE_OF
 	select ZONE_DMA32 if 64BIT
+	select BUILTIN_DTB
+	select LIBFDT
 	help
 	  This enables support for the MIPS Technologies Malta evaluation
 	  board.
@@ -964,6 +992,7 @@ source "arch/mips/loongson32/Kconfig"
 source "arch/mips/loongson64/Kconfig"
 source "arch/mips/netlogic/Kconfig"
 source "arch/mips/paravirt/Kconfig"
+source "arch/mips/xilfpga/Kconfig"
 
 endmenu
 
@@ -1036,6 +1065,9 @@ config CSRC_R4K
 config CSRC_SB1250
 	bool
 
+config MIPS_CLOCK_VSYSCALL
+	def_bool CSRC_R4K || CLKSRC_MIPS_GIC
+
 config GPIO_TXX9
 	select ARCH_REQUIRE_GPIOLIB
 	bool
@@ -2529,6 +2561,9 @@ choice
 	help
 	 Allows the configuration of the timer frequency.
 
+	config HZ_24
+		bool "24 HZ" if SYS_SUPPORTS_24HZ || SYS_SUPPORTS_ARBIT_HZ
+
 	config HZ_48
 		bool "48 HZ" if SYS_SUPPORTS_48HZ || SYS_SUPPORTS_ARBIT_HZ
 
@@ -2552,6 +2587,9 @@ choice
 
 endchoice
 
+config SYS_SUPPORTS_24HZ
+	bool
+
 config SYS_SUPPORTS_48HZ
 	bool
 
@@ -2575,13 +2613,18 @@ config SYS_SUPPORTS_1024HZ
 
 config SYS_SUPPORTS_ARBIT_HZ
 	bool
-	default y if !SYS_SUPPORTS_48HZ && !SYS_SUPPORTS_100HZ && \
-		     !SYS_SUPPORTS_128HZ && !SYS_SUPPORTS_250HZ && \
-		     !SYS_SUPPORTS_256HZ && !SYS_SUPPORTS_1000HZ && \
+	default y if !SYS_SUPPORTS_24HZ && \
+		     !SYS_SUPPORTS_48HZ && \
+		     !SYS_SUPPORTS_100HZ && \
+		     !SYS_SUPPORTS_128HZ && \
+		     !SYS_SUPPORTS_250HZ && \
+		     !SYS_SUPPORTS_256HZ && \
+		     !SYS_SUPPORTS_1000HZ && \
 		     !SYS_SUPPORTS_1024HZ
 
 config HZ
 	int
+	default 24 if HZ_24
 	default 48 if HZ_48
 	default 100 if HZ_100
 	default 128 if HZ_128
@@ -2685,7 +2728,7 @@ config BUILTIN_DTB
 	bool
 
 choice
-	prompt "Kernel appended dtb support" if OF
+	prompt "Kernel appended dtb support" if USE_OF
 	default MIPS_NO_APPENDED_DTB
 
 	config MIPS_NO_APPENDED_DTB
@@ -2693,6 +2736,20 @@ choice
 		help
 		  Do not enable appended dtb support.
 
+	config MIPS_ELF_APPENDED_DTB
+		bool "vmlinux"
+		help
+		  With this option, the boot code will look for a device tree binary
+		  DTB) included in the vmlinux ELF section .appended_dtb. By default
+		  it is empty and the DTB can be appended using binutils command
+		  objcopy:
+
+		    objcopy --update-section .appended_dtb=<filename>.dtb vmlinux
+
+		  This is meant as a backward compatiblity convenience for those
+		  systems with a bootloader that can't be upgraded to accommodate
+		  the documented boot protocol using a device tree.
+
 	config MIPS_RAW_APPENDED_DTB
 		bool "vmlinux.bin"
 		help
@@ -2729,6 +2786,25 @@ choice
 		  if you don't intend to always append a DTB.
 endchoice
 
+choice
+	prompt "Kernel command line type" if !CMDLINE_OVERRIDE
+	default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \
+					 !MIPS_MALTA && !MIPS_SEAD3 && \
+					 !CAVIUM_OCTEON_SOC
+	default MIPS_CMDLINE_FROM_BOOTLOADER
+
+	config MIPS_CMDLINE_FROM_DTB
+		depends on USE_OF
+		bool "Dtb kernel arguments if available"
+
+	config MIPS_CMDLINE_DTB_EXTEND
+		depends on USE_OF
+		bool "Extend dtb kernel arguments with bootloader arguments"
+
+	config MIPS_CMDLINE_FROM_BOOTLOADER
+		bool "Bootloader kernel arguments if available"
+endchoice
+
 endmenu
 
 config LOCKDEP_SUPPORT
@@ -2739,6 +2815,10 @@ config STACKTRACE_SUPPORT
 	bool
 	default y
 
+config HAVE_LATENCYTOP_SUPPORT
+	bool
+	default y
+
 config PGTABLE_LEVELS
 	int
 	default 3 if 64BIT && !PAGE_SIZE_64KB