X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=board%2Fbf527-ezkit%2Fvideo.c;h=c2bf145013f9388cd40f1e572f2f86b6aef5e088;hb=HEAD;hp=ca5e9b0454586e090a0e3b7341afc968e7ef1b7c;hpb=e3f279fb1419b7cb5fd4d0e18e52a892770cf934;p=karo-tx-uboot.git

diff --git a/board/bf527-ezkit/video.c b/board/bf527-ezkit/video.c
index ca5e9b0454..c2bf145013 100644
--- a/board/bf527-ezkit/video.c
+++ b/board/bf527-ezkit/video.c
@@ -17,6 +17,10 @@
 #include <linux/types.h>
 #include <stdio_dev.h>
 
+#include <lzma/LzmaTypes.h>
+#include <lzma/LzmaDec.h>
+#include <lzma/LzmaTools.h>
+
 #include <asm/mach-common/bits/ppi.h>
 #include <asm/mach-common/bits/timer.h>
 
@@ -24,12 +28,9 @@
 #define LCD_Y_RES		240	/* Vertical Resolution */
 #define DMA_BUS_SIZE		16
 
-#ifdef CONFIG_BF527_EZKIT_REV_2_1 /* lq035q1 */
+#include EASYLOGO_HEADER
 
-#if !defined(CONFIG_LQ035Q1_USE_RGB888_8_BIT_PPI) && \
-    !defined(CONFIG_LQ035Q1_USE_RGB565_8_BIT_PPI)
-# define CONFIG_LQ035Q1_USE_RGB565_8_BIT_PPI
-#endif
+#ifdef CONFIG_BF527_EZKIT_REV_2_1 /* lq035q1 */
 
 /* Interface 16/18-bit TFT over an 8-bit wide PPI using a
  * small Programmable Logic Device (CPLD)
@@ -37,14 +38,12 @@
  */
 
 #ifdef CONFIG_LQ035Q1_USE_RGB565_8_BIT_PPI
-#include <asm/bfin_logo_rgb565_230x230.h>
 #define LCD_BPP		16	/* Bit Per Pixel */
 #define CLOCKS_PPIX	2	/* Clocks per pixel */
 #define CPLD_DELAY	3	/* RGB565 pipeline delay */
 #endif
 
 #ifdef CONFIG_LQ035Q1_USE_RGB888_8_BIT_PPI
-#include <asm/bfin_logo_230x230.h>
 #define LCD_BPP		24	/* Bit Per Pixel */
 #define CLOCKS_PPIX	3	/* Clocks per pixel */
 #define CPLD_DELAY	5	/* RGB888 pipeline delay */
@@ -96,7 +95,6 @@
 #endif
 
 #else /* t350mcqb */
-#include <asm/bfin_logo_230x230.h>
 
 #define LCD_BPP		24	/* Bit Per Pixel */
 #define CLOCKS_PPIX	3	/* Clocks per pixel */
@@ -393,14 +391,6 @@ void video_stop(void)
 #endif
 }
 
-void video_putc(const char c)
-{
-}
-
-void video_puts(const char *s)
-{
-}
-
 int drv_video_init(void)
 {
 	int error, devices = 1;
@@ -419,13 +409,23 @@ int drv_video_init(void)
 #ifdef EASYLOGO_ENABLE_GZIP
 	unsigned char *data = EASYLOGO_DECOMP_BUFFER;
 	unsigned long src_len = EASYLOGO_ENABLE_GZIP;
-	if (gunzip(data, bfin_logo.size, bfin_logo.data, &src_len)) {
+	error = gunzip(data, bfin_logo.size, bfin_logo.data, &src_len);
+	bfin_logo.data = data;
+#elif defined(EASYLOGO_ENABLE_LZMA)
+	unsigned char *data = EASYLOGO_DECOMP_BUFFER;
+	SizeT lzma_len = bfin_logo.size;
+	error = lzmaBuffToBuffDecompress(data, &lzma_len,
+		bfin_logo.data, EASYLOGO_ENABLE_LZMA);
+	bfin_logo.data = data;
+#else
+	error = 0;
+#endif
+
+	if (error) {
 		puts("Failed to decompress logo\n");
 		free(dst);
 		return -1;
 	}
-	bfin_logo.data = data;
-#endif
 
 	memset(dst + ACTIVE_VIDEO_MEM_OFFSET, bfin_logo.data[0], fbmem_size - ACTIVE_VIDEO_MEM_OFFSET);
 
@@ -440,8 +440,6 @@ int drv_video_init(void)
 	strcpy(videodev.name, "video");
 	videodev.ext = DEV_EXT_VIDEO;	/* Video extensions */
 	videodev.flags = DEV_FLAGS_SYSTEM;	/* No Output */
-	videodev.putc = video_putc;	/* 'putc' function */
-	videodev.puts = video_puts;	/* 'puts' function */
 
 	error = stdio_register(&videodev);