X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=board%2Fc2mon%2Fc2mon.c;h=717a64bb802fa9bdd5aec46b38e304849046eb22;hb=f55c2c109e2b2198d4e45f6e49b755575a5f610f;hp=ca8eb0cb02bbddec7839acf5eb511772fcbd6198;hpb=ba7da7190c4c1095338340245d8d82cd8f2b635a;p=karo-tx-uboot.git

diff --git a/board/c2mon/c2mon.c b/board/c2mon/c2mon.c
index ca8eb0cb02..717a64bb80 100755
--- a/board/c2mon/c2mon.c
+++ b/board/c2mon/c2mon.c
@@ -108,9 +108,9 @@ int checkboard (void)
 
 /* ------------------------------------------------------------------------- */
 
-long int initdram (int board_type)
+phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long reg;
 	long int size8, size9;
@@ -124,17 +124,17 @@ long int initdram (int board_type)
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
-	memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
 
 	memctl->memc_mar = 0x00000088;
 
 	/*
 	 * Map controller bank 2 the SDRAM bank 2 at physical address 0.
 	 */
-	memctl->memc_or2 = CFG_OR2_PRELIM;
-	memctl->memc_br2 = CFG_BR2_PRELIM;
+	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
 
-	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
 
 	udelay (200);
 
@@ -154,7 +154,7 @@ long int initdram (int board_type)
 	 *
 	 * try 8 column mode
 	 */
-	size8 = dram_size (CFG_MAMR_8COL,
+	size8 = dram_size (CONFIG_SYS_MAMR_8COL,
 			   SDRAM_BASE2_PRELIM,
 			   SDRAM_MAX_SIZE);
 
@@ -163,7 +163,7 @@ long int initdram (int board_type)
 	/*
 	 * try 9 column mode
 	 */
-	size9 = dram_size (CFG_MAMR_9COL,
+	size9 = dram_size (CONFIG_SYS_MAMR_9COL,
 			   SDRAM_BASE2_PRELIM,
 			   SDRAM_MAX_SIZE);
 
@@ -172,7 +172,7 @@ long int initdram (int board_type)
 /*		debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20);	*/
 	} else {			/* back to 8 columns            */
 		size = size8;
-		memctl->memc_mamr = CFG_MAMR_8COL;
+		memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
 		udelay (500);
 /*		debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20);	*/
 	}
@@ -185,15 +185,15 @@ long int initdram (int board_type)
 	 */
 	if (size < 0x02000000) {
 		/* reduce to 15.6 us (62.4 us / quad) */
-		memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+		memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
 		udelay (1000);
 	}
 
 	/*
 	 * Final mapping
 	 */
-	memctl->memc_or2 = ((-size) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
-	memctl->memc_br2 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+	memctl->memc_or2 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
+	memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 
 	/*
 	 * No bank 1
@@ -204,7 +204,7 @@ long int initdram (int board_type)
 
 	/* adjust refresh rate depending on SDRAM type, one bank */
 	reg = memctl->memc_mptpr;
-	reg >>= 1;			/* reduce to CFG_MPTPR_1BK_8K / _4K */
+	reg >>= 1;			/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
 	memctl->memc_mptpr = reg;
 
 	udelay (10000);
@@ -225,7 +225,7 @@ long int initdram (int board_type)
 static long int dram_size (long int mamr_value, long int *base,
 						   long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mamr = mamr_value;