X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=board%2Fcm-bf537e%2Fgpio_cfi_flash.c;h=1075cc41127dabd31f54964a8ca095068a06b1d9;hb=HEAD;hp=a9e69cfe418e75c1ef6ce5f7f7597a14fe121110;hpb=68ccfa482be0c7e4aa18285aceb214ed7f5d8e89;p=karo-tx-uboot.git diff --git a/board/cm-bf537e/gpio_cfi_flash.c b/board/cm-bf537e/gpio_cfi_flash.c index a9e69cfe41..1075cc4112 100644 --- a/board/cm-bf537e/gpio_cfi_flash.c +++ b/board/cm-bf537e/gpio_cfi_flash.c @@ -1,37 +1,50 @@ /* * gpio_cfi_flash.c - GPIO-assisted Flash Chip Support * - * Copyright (c) 2009 Analog Devices Inc. + * Copyright (c) 2009-2010 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ #include #include +#include #include #include "gpio_cfi_flash.h" -#define GPIO_PIN_1 PF4 +/* Allow this driver to be shared among boards */ +#ifndef GPIO_PIN_1 +#define GPIO_PIN_1 GPIO_PF4 +#endif #define GPIO_MASK_1 (1 << 21) -#define GPIO_MASK (GPIO_MASK_1) +#ifndef GPIO_PIN_2 +#define GPIO_MASK_2 (0) +#else +#define GPIO_MASK_2 (1 << 22) +#endif +#ifndef GPIO_PIN_3 +#define GPIO_MASK_3 (0) +#else +#define GPIO_MASK_3 (1 << 23) +#endif +#define GPIO_MASK (GPIO_MASK_1 | GPIO_MASK_2 | GPIO_MASK_3) void *gpio_cfi_flash_swizzle(void *vaddr) { unsigned long addr = (unsigned long)vaddr; - if (addr & GPIO_MASK_1) - bfin_write_PORTFIO_SET(GPIO_PIN_1); - else - bfin_write_PORTFIO_CLEAR(GPIO_PIN_1); + gpio_set_value(GPIO_PIN_1, addr & GPIO_MASK_1); -#ifdef GPIO_MASK_2 - if (addr & GPIO_MASK_2) - bfin_write_PORTGIO_SET(GPIO_PIN_2); - else - bfin_write_PORTGIO_CLEAR(GPIO_PIN_2); +#ifdef GPIO_PIN_2 + gpio_set_value(GPIO_PIN_2, addr & GPIO_MASK_2); +#endif + +#ifdef GPIO_PIN_3 + gpio_set_value(GPIO_PIN_3, addr & GPIO_MASK_3); #endif SSYNC(); + udelay(1); return (void *)(addr & ~GPIO_MASK); } @@ -55,6 +68,14 @@ MAKE_FLASH(64, q) /* flash_write64() flash_read64() */ void gpio_cfi_flash_init(void) { - bfin_write_PORTFIO_DIR(bfin_read_PORTFIO_DIR() | GPIO_PIN_1); - gpio_cfi_flash_swizzle((void *)CONFIG_SYS_FLASH_BASE); + gpio_request(GPIO_PIN_1, "gpio_cfi_flash"); + gpio_direction_output(GPIO_PIN_1, 0); +#ifdef GPIO_PIN_2 + gpio_request(GPIO_PIN_2, "gpio_cfi_flash"); + gpio_direction_output(GPIO_PIN_2, 0); +#endif +#ifdef GPIO_PIN_3 + gpio_request(GPIO_PIN_3, "gpio_cfi_flash"); + gpio_direction_output(GPIO_PIN_3, 0); +#endif }