X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=board%2Fronetix%2Fpm9g45%2Fpm9g45.c;h=efc4133bbfe9d78f6048781efba3340dc186982d;hb=5cce2f820ce174e50106142a8d0997e3fa76f1dc;hp=d29d0763acaaa2c374d82e53425c09ddce4733cf;hpb=1086c5d6f8541460f0f10e4a302d8aac27e0e6e0;p=karo-tx-uboot.git

diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c
index d29d0763ac..efc4133bbf 100644
--- a/board/ronetix/pm9g45/pm9g45.c
+++ b/board/ronetix/pm9g45/pm9g45.c
@@ -8,28 +8,13 @@
  * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #include <common.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
@@ -82,11 +67,11 @@ static void pm9g45_nand_hw_init(void)
 
 #ifdef CONFIG_SYS_NAND_READY_PIN
 	/* Configure RDY/BSY */
-	at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
 #endif
 
 	/* Enable NandFlash */
-	at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 }
 #endif
 
@@ -127,22 +112,28 @@ static void pm9g45_macb_hw_init(void)
 }
 #endif
 
-int board_init(void)
+int board_early_init_f(void)
 {
 	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 
-	/* Enable Ctrlc */
-	console_init_f();
-
+	/* Enable clocks for all PIOs */
 	writel((1 << ATMEL_ID_PIOA) |
 		(1 << ATMEL_ID_PIOB) |
 		(1 << ATMEL_ID_PIOC) |
 		(1 << ATMEL_ID_PIODE), &pmc->pcer);
 
+	at91_seriald_hw_init();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* arch number of AT91SAM9M10G45EK-Board */
+	gd->bd->bi_arch_number = MACH_TYPE_PM9G45;
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
-	at91_seriald_hw_init();
 #ifdef CONFIG_CMD_NAND
 	pm9g45_nand_hw_init();
 #endif
@@ -175,7 +166,7 @@ void reset_phy(void)
 	 * Initialize ethernet HW addr prior to starting Linux,
 	 * needed for nfsroot
 	 */
-	eth_init(gd->bd);
+	eth_init();
 #endif
 }
 #endif