X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=board%2Fsolidrun%2Fmx6cuboxi%2FREADME;h=b417ff033489a7fc9fa430bd1723e741680cb28d;hb=0c6aaf5038d33bbbdae3fbaea0e42632384edf71;hp=3050c48840ccae782f3f946c9253086396d338c1;hpb=1a85d7e7632b38f176f5e73bdbc914e96daa557a;p=karo-tx-uboot.git

diff --git a/board/solidrun/mx6cuboxi/README b/board/solidrun/mx6cuboxi/README
index 3050c48840..b417ff0334 100644
--- a/board/solidrun/mx6cuboxi/README
+++ b/board/solidrun/mx6cuboxi/README
@@ -1,7 +1,7 @@
-How to use U-boot on Solid-run mx6 hummingboard
------------------------------------------------
+How to use U-boot on Solid-run mx6 Hummingboard and Cubox-i
+-----------------------------------------------------------
 
-- Build U-boot for hummingboard:
+- Build U-boot for Hummingboard/Cubox-i:
 
 $ make mrproper
 $ make mx6cuboxi_defconfig
@@ -17,5 +17,5 @@ sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
 
 sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync
 
-- Insert the SD card in the hummingboard, power it up and U-boot messages
-should come up.
+- Insert the SD card in the board, power it up and U-boot messages should
+come up.