X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=common%2FKconfig;h=ccf5475bac63ae4b2e2ff54ed1afe4b258f996b3;hb=9854a8748c8fdd69784a1fa1c4758c696621c88d;hp=88dc0160796e745a8ec7f683591e75f45fa0c758;hpb=fcd78fa604d994477fd209b9faab4a974b103250;p=karo-tx-uboot.git

diff --git a/common/Kconfig b/common/Kconfig
index 88dc016079..ccf5475bac 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -148,6 +148,12 @@ config CMD_BOOTM
 	help
 	  Boot an application image from the memory.
 
+config CMD_ELF
+	bool "bootelf, bootvx"
+	default y
+	help
+	  Boot an ELF/vxWorks image from the memory.
+
 config CMD_GO
 	bool "go"
 	default y
@@ -344,6 +350,17 @@ config CMD_FPGA
 	help
 	  FPGA support.
 
+config CMD_REMOTEPROC
+	bool "remoteproc"
+	depends on REMOTEPROC
+	help
+	  Support for Remote Processor control
+
+config CMD_GPIO
+	bool "gpio"
+	help
+	  GPIO support.
+
 endmenu
 
 
@@ -444,6 +461,20 @@ endmenu
 
 menu "Misc commands"
 
+config CMD_AMBAPP
+	bool "ambapp"
+	depends on LEON3
+	default y
+	help
+	  Lists AMBA Plug-n-Play information.
+
+config SYS_AMBAPP_PRINT_ON_STARTUP
+	bool "Show AMBA PnP info on startup"
+	depends on CMD_AMBAPP
+	default n
+	help
+	  Show AMBA Plug-n-Play information on startup.
+
 config CMD_TIME
 	bool "time"
 	help
@@ -625,4 +656,54 @@ config CMD_REGULATOR
 
 endmenu
 
+menu "Security commands"
+config CMD_TPM
+	bool "Enable the 'tpm' command"
+	depends on TPM
+	help
+	  This provides a means to talk to a TPM from the command line. A wide
+	  range of commands if provided - see 'tpm help' for details. The
+	  command requires a suitable TPM on your board and the correct driver
+	  must be enabled.
+
+config CMD_TPM_TEST
+	bool "Enable the 'tpm test' command"
+	depends on CMD_TPM
+	help
+	  This provides a a series of tests to confirm that the TPM is working
+	  correctly. The tests cover initialisation, non-volatile RAM, extend,
+	  global lock and checking that timing is within expectations. The
+	  tests pass correctly on Infineon TPMs but may need to be adjusted
+	  for other devices.
+
+endmenu
+
 endmenu
+
+config CONSOLE_RECORD
+	bool "Console recording"
+	help
+	  This provides a way to record console output (and provide console
+	  input) through cirular buffers. This is mostly useful for testing.
+	  Console output is recorded even when the console is silent.
+	  To enable console recording, call console_record_reset_enable()
+	  from your code.
+
+config CONSOLE_RECORD_OUT_SIZE
+	hex "Output buffer size"
+	depends on CONSOLE_RECORD
+	default 0x400 if CONSOLE_RECORD
+	help
+	  Set the size of the console output buffer. When this fills up, no
+	  more data will be recorded until some is removed. The buffer is
+	  allocated immediately after the malloc() region is ready.
+
+config CONSOLE_RECORD_IN_SIZE
+	hex "Input buffer size"
+	depends on CONSOLE_RECORD
+	default 0x100 if CONSOLE_RECORD
+	help
+	  Set the size of the console input buffer. When this contains data,
+	  tstc() and getc() will use this in preference to real device input.
+	  The buffer is allocated immediately after the malloc() region is
+	  ready.