X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=configs%2FMele_M9_defconfig;h=b52e3c20abff4d019f4719b727ab3720221a229b;hb=8d18191b12a87da989acaa3ff2e467376de9b2b4;hp=e5ab0ec3029c62b478f06c76556feb969988c674;hpb=1262a85fe36936f404dc2deccc3ebaacebb612c5;p=karo-tx-uboot.git

diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig
index e5ab0ec302..b52e3c20ab 100644
--- a/configs/Mele_M9_defconfig
+++ b/configs/Mele_M9_defconfig
@@ -1,21 +1,19 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN6I=y
+CONFIG_DRAM_ZQ=120
+CONFIG_USB1_VBUS_PIN="PC27"
+CONFIG_USB2_VBUS_PIN=""
+CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-m9"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
-CONFIG_FDTFILE="sun6i-a31-m9.dtb"
-+S:CONFIG_ARM=y
-+S:CONFIG_ARCH_SUNXI=y
-+S:CONFIG_MACH_SUN6I=y
-+S:CONFIG_TARGET_MELE_M9=y
-+S:CONFIG_DRAM_CLK=312
-+S:CONFIG_DRAM_ZQ=120
-# The Mele M9 uses 3.3V for general IO
-+S:CONFIG_AXP221_DCDC1_VOLT=3300
-# Ethernet phy power
-+S:CONFIG_AXP221_DLDO1_VOLT=3300
-# USB hub power
-+S:CONFIG_AXP221_DLDO4_VOLT=3300
-# Wifi power
-+S:CONFIG_AXP221_ALDO1_VOLT=3300
-# Vbus gpio for usb1
-+S:CONFIG_USB1_VBUS_PIN="PC27"
-# No Vbus gpio for usb2
-+S:CONFIG_USB2_VBUS_PIN=""
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_AXP221_DCDC1_VOLT=3300
+CONFIG_AXP221_DLDO1_VOLT=3300
+CONFIG_AXP221_DLDO4_VOLT=3300
+CONFIG_AXP221_ALDO1_VOLT=3300
+CONFIG_USB_EHCI_HCD=y