X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=doc%2FREADME.fsl-esdhc;h=7e713875763e4a5a86e4934c7c33bb7c4b406efd;hb=e439af81804d15fd95f804205184a9ff3e15b72a;hp=b70f271d1a473d283a0e9ae632e6901b9e65d455;hpb=42817eb85de1d7dec399c75dbd133ea6b5351a72;p=karo-tx-uboot.git diff --git a/doc/README.fsl-esdhc b/doc/README.fsl-esdhc index b70f271d1a..7e71387576 100644 --- a/doc/README.fsl-esdhc +++ b/doc/README.fsl-esdhc @@ -1,5 +1,24 @@ -CONFIG_SYS_FSL_ESDHC_LE means ESDHC IP is in little-endian mode. -CONFIG_SYS_FSL_ESDHC_BE means ESDHC IP is in big-endian mode. +Freescale esdhc-specific options -Accessing ESDHC registers can be determined by ESDHC IP's endian -mode or processor's endian mode. + - CONFIG_FSL_ESDHC_ADAPTER_IDENT + Support Freescale adapter card type identification. This is implemented by + operating Qixis FPGA relevant registers. The STAT_PRES1 register has SDHC + Card ID[0:2] bits showing the type of card installed in the SDHC Adapter Slot. + + SDHC Card ID[0:2] Adapter Card Type + 0b000 reserved + 0b001 eMMC Card Rev4.5 + 0b010 SD/MMC Legacy Card + 0b011 eMMC Card Rev4.4 + 0b100 reserved + 0b101 MMC Card + 0b110 SD Card Rev2.0/3.0 + 0b111 No card is present + - CONFIG_SYS_FSL_ESDHC_LE + ESDHC IP is in little-endian mode. Accessing ESDHC registers can be + determined by ESDHC IP's endian mode or processor's endian mode. + - CONFIG_SYS_FSL_ESDHC_BE + ESDHC IP is in big-endian mode. Accessing ESDHC registers can be determined + by ESDHC IP's endian mode or processor's endian mode. + + - CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT forces to run at 1.8V.