X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=doc%2Fhtml%2Fref%2Fedk7708.html;fp=doc%2Fhtml%2Fref%2Fedk7708.html;h=0000000000000000000000000000000000000000;hb=739c21725ce2774a605a0f1de3edaac2c43aea0f;hp=9204fa5f515acf0389a4298d699f28e2f13f8e5a;hpb=ae71e0fa8076a1b59600b3a0ea10155a2cb534ae;p=karo-tx-redboot.git diff --git a/doc/html/ref/edk7708.html b/doc/html/ref/edk7708.html deleted file mode 100644 index 9204fa5f..00000000 --- a/doc/html/ref/edk7708.html +++ /dev/null @@ -1,306 +0,0 @@ - - - - - - - - -
RedBoot uses -the serial port. The default serial port settings are 38400,8,N,1.
Management of onboard flash is also supported.
The following RedBoot configurations are supported: - -
Program the ROM RedBoot image into flash using an eprom programmer.
RedBoot sets up the following memory map on the EDK7708 board.
Physical Address Range Description ------------------------ ----------- -0x80000000 - 0x8001ffff Flash (AT29LV1024) -0x88000000 - 0x881fffff DRAM -0xa4000000 - 0xa40000ff LED ON -0xb8000000 - 0xb80000ff LED ON |
These shell variables provide the platform-specific information -needed for building RedBoot according to the procedure described in -Chapter 3: -
export TARGET=edk7708 -export ARCH_DIR=sh -export PLATFORM_DIR=edk7708 |
The names of configuration files are listed above with the -description of the associated modes.