X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=drivers%2Fieee1394%2Fpcilynx.h;fp=drivers%2Fieee1394%2Fpcilynx.h;h=0000000000000000000000000000000000000000;hb=f2ec334db8d14ae3ec2e4bf8d974f75b8f772e26;hp=693a169acea3fe0c831198044167101c2bcd4064;hpb=81e20d4d8d0317ecf1c7d193a52ab26cf74e1737;p=mv-sheeva.git diff --git a/drivers/ieee1394/pcilynx.h b/drivers/ieee1394/pcilynx.h deleted file mode 100644 index 693a169acea..00000000000 --- a/drivers/ieee1394/pcilynx.h +++ /dev/null @@ -1,468 +0,0 @@ -#ifndef __PCILYNX_H__ -#define __PCILYNX_H__ - - -#define PCILYNX_DRIVER_NAME "pcilynx" -#define PCILYNX_MAJOR 177 - -#define PCILYNX_MINOR_AUX_START 0 -#define PCILYNX_MINOR_ROM_START 16 -#define PCILYNX_MINOR_RAM_START 32 - -#define PCILYNX_MAX_REGISTER 0xfff -#define PCILYNX_MAX_MEMORY 0xffff - -#define PCI_DEVICE_ID_TI_PCILYNX 0x8000 -#define MAX_PCILYNX_CARDS 4 -#define LOCALRAM_SIZE 4096 - -#define NUM_ISORCV_PCL 4 -#define MAX_ISORCV_SIZE 2048 -#define ISORCV_PER_PAGE (PAGE_SIZE / MAX_ISORCV_SIZE) -#define ISORCV_PAGES (NUM_ISORCV_PCL / ISORCV_PER_PAGE) - -#define CHANNEL_LOCALBUS 0 -#define CHANNEL_ASYNC_RCV 1 -#define CHANNEL_ISO_RCV 2 -#define CHANNEL_ASYNC_SEND 3 -#define CHANNEL_ISO_SEND 4 - -#define PCILYNX_CONFIG_ROM_LENGTH 1024 - -typedef int pcl_t; - -struct ti_lynx { - int id; /* sequential card number */ - - spinlock_t lock; - - struct pci_dev *dev; - - struct { - unsigned reg_1394a:1; - u32 vendor; - u32 product; - } phyic; - - enum { clear, have_intr, have_aux_buf, have_pcl_mem, - have_1394_buffers, have_iomappings, is_host } state; - - /* remapped memory spaces */ - void __iomem *registers; - void __iomem *local_rom; - void __iomem *local_ram; - void __iomem *aux_port; - __be32 bus_info_block[5]; - - /* - * use local RAM of LOCALRAM_SIZE bytes for PCLs, which allows for - * LOCALRAM_SIZE * 8 PCLs (each sized 128 bytes); - * the following is an allocation bitmap - */ - u8 pcl_bmap[LOCALRAM_SIZE / 1024]; - - /* point to PCLs memory area if needed */ - void *pcl_mem; - dma_addr_t pcl_mem_dma; - - /* PCLs for local mem / aux transfers */ - pcl_t dmem_pcl; - - /* IEEE-1394 part follows */ - struct hpsb_host *host; - - int phyid, isroot; - int selfid_size; - int phy_reg0; - - spinlock_t phy_reg_lock; - - pcl_t rcv_pcl_start, rcv_pcl; - void *rcv_page; - dma_addr_t rcv_page_dma; - int rcv_active; - - struct lynx_send_data { - pcl_t pcl_start, pcl; - struct list_head queue; - struct list_head pcl_queue; /* this queue contains at most one packet */ - spinlock_t queue_lock; - dma_addr_t header_dma, data_dma; - int channel; - } async, iso_send; - - struct { - pcl_t pcl[NUM_ISORCV_PCL]; - u32 stat[NUM_ISORCV_PCL]; - void *page[ISORCV_PAGES]; - dma_addr_t page_dma[ISORCV_PAGES]; - pcl_t pcl_start; - int chan_count; - int next, last, used, running; - struct tasklet_struct tq; - spinlock_t lock; - } iso_rcv; - - u32 i2c_driven_state; /* the state we currently drive the Serial EEPROM Control register */ -}; - -/* the per-file data structure for mem space access */ -struct memdata { - struct ti_lynx *lynx; - int cid; - atomic_t aux_intr_last_seen; - /* enum values are the same as LBUS_ADDR_SEL_* values below */ - enum { rom = 0x10000, aux = 0x20000, ram = 0 } type; -}; - - - -/* - * Register read and write helper functions. - */ -static inline void reg_write(const struct ti_lynx *lynx, int offset, u32 data) -{ - writel(data, lynx->registers + offset); -} - -static inline u32 reg_read(const struct ti_lynx *lynx, int offset) -{ - return readl(lynx->registers + offset); -} - -static inline void reg_set_bits(const struct ti_lynx *lynx, int offset, - u32 mask) -{ - reg_write(lynx, offset, (reg_read(lynx, offset) | mask)); -} - -static inline void reg_clear_bits(const struct ti_lynx *lynx, int offset, - u32 mask) -{ - reg_write(lynx, offset, (reg_read(lynx, offset) & ~mask)); -} - - - -/* chip register definitions follow */ - -#define PCI_LATENCY_CACHELINE 0x0c - -#define MISC_CONTROL 0x40 -#define MISC_CONTROL_SWRESET (1<<0) - -#define SERIAL_EEPROM_CONTROL 0x44 - -#define PCI_INT_STATUS 0x48 -#define PCI_INT_ENABLE 0x4c -/* status and enable have identical bit numbers */ -#define PCI_INT_INT_PEND (1<<31) -#define PCI_INT_FORCED_INT (1<<30) -#define PCI_INT_SLV_ADR_PERR (1<<28) -#define PCI_INT_SLV_DAT_PERR (1<<27) -#define PCI_INT_MST_DAT_PERR (1<<26) -#define PCI_INT_MST_DEV_TIMEOUT (1<<25) -#define PCI_INT_INTERNAL_SLV_TIMEOUT (1<<23) -#define PCI_INT_AUX_TIMEOUT (1<<18) -#define PCI_INT_AUX_INT (1<<17) -#define PCI_INT_1394 (1<<16) -#define PCI_INT_DMA4_PCL (1<<9) -#define PCI_INT_DMA4_HLT (1<<8) -#define PCI_INT_DMA3_PCL (1<<7) -#define PCI_INT_DMA3_HLT (1<<6) -#define PCI_INT_DMA2_PCL (1<<5) -#define PCI_INT_DMA2_HLT (1<<4) -#define PCI_INT_DMA1_PCL (1<<3) -#define PCI_INT_DMA1_HLT (1<<2) -#define PCI_INT_DMA0_PCL (1<<1) -#define PCI_INT_DMA0_HLT (1<<0) -/* all DMA interrupts combined: */ -#define PCI_INT_DMA_ALL 0x3ff - -#define PCI_INT_DMA_HLT(chan) (1 << (chan * 2)) -#define PCI_INT_DMA_PCL(chan) (1 << (chan * 2 + 1)) - -#define LBUS_ADDR 0xb4 -#define LBUS_ADDR_SEL_RAM (0x0<<16) -#define LBUS_ADDR_SEL_ROM (0x1<<16) -#define LBUS_ADDR_SEL_AUX (0x2<<16) -#define LBUS_ADDR_SEL_ZV (0x3<<16) - -#define GPIO_CTRL_A 0xb8 -#define GPIO_CTRL_B 0xbc -#define GPIO_DATA_BASE 0xc0 - -#define DMA_BREG(base, chan) (base + chan * 0x20) -#define DMA_SREG(base, chan) (base + chan * 0x10) - -#define DMA0_PREV_PCL 0x100 -#define DMA1_PREV_PCL 0x120 -#define DMA2_PREV_PCL 0x140 -#define DMA3_PREV_PCL 0x160 -#define DMA4_PREV_PCL 0x180 -#define DMA_PREV_PCL(chan) (DMA_BREG(DMA0_PREV_PCL, chan)) - -#define DMA0_CURRENT_PCL 0x104 -#define DMA1_CURRENT_PCL 0x124 -#define DMA2_CURRENT_PCL 0x144 -#define DMA3_CURRENT_PCL 0x164 -#define DMA4_CURRENT_PCL 0x184 -#define DMA_CURRENT_PCL(chan) (DMA_BREG(DMA0_CURRENT_PCL, chan)) - -#define DMA0_CHAN_STAT 0x10c -#define DMA1_CHAN_STAT 0x12c -#define DMA2_CHAN_STAT 0x14c -#define DMA3_CHAN_STAT 0x16c -#define DMA4_CHAN_STAT 0x18c -#define DMA_CHAN_STAT(chan) (DMA_BREG(DMA0_CHAN_STAT, chan)) -/* CHAN_STATUS registers share bits */ -#define DMA_CHAN_STAT_SELFID (1<<31) -#define DMA_CHAN_STAT_ISOPKT (1<<30) -#define DMA_CHAN_STAT_PCIERR (1<<29) -#define DMA_CHAN_STAT_PKTERR (1<<28) -#define DMA_CHAN_STAT_PKTCMPL (1<<27) -#define DMA_CHAN_STAT_SPECIALACK (1<<14) - - -#define DMA0_CHAN_CTRL 0x110 -#define DMA1_CHAN_CTRL 0x130 -#define DMA2_CHAN_CTRL 0x150 -#define DMA3_CHAN_CTRL 0x170 -#define DMA4_CHAN_CTRL 0x190 -#define DMA_CHAN_CTRL(chan) (DMA_BREG(DMA0_CHAN_CTRL, chan)) -/* CHAN_CTRL registers share bits */ -#define DMA_CHAN_CTRL_ENABLE (1<<31) -#define DMA_CHAN_CTRL_BUSY (1<<30) -#define DMA_CHAN_CTRL_LINK (1<<29) - -#define DMA0_READY 0x114 -#define DMA1_READY 0x134 -#define DMA2_READY 0x154 -#define DMA3_READY 0x174 -#define DMA4_READY 0x194 -#define DMA_READY(chan) (DMA_BREG(DMA0_READY, chan)) - -#define DMA_GLOBAL_REGISTER 0x908 - -#define FIFO_SIZES 0xa00 - -#define FIFO_CONTROL 0xa10 -#define FIFO_CONTROL_GRF_FLUSH (1<<4) -#define FIFO_CONTROL_ITF_FLUSH (1<<3) -#define FIFO_CONTROL_ATF_FLUSH (1<<2) - -#define FIFO_XMIT_THRESHOLD 0xa14 - -#define DMA0_WORD0_CMP_VALUE 0xb00 -#define DMA1_WORD0_CMP_VALUE 0xb10 -#define DMA2_WORD0_CMP_VALUE 0xb20 -#define DMA3_WORD0_CMP_VALUE 0xb30 -#define DMA4_WORD0_CMP_VALUE 0xb40 -#define DMA_WORD0_CMP_VALUE(chan) (DMA_SREG(DMA0_WORD0_CMP_VALUE, chan)) - -#define DMA0_WORD0_CMP_ENABLE 0xb04 -#define DMA1_WORD0_CMP_ENABLE 0xb14 -#define DMA2_WORD0_CMP_ENABLE 0xb24 -#define DMA3_WORD0_CMP_ENABLE 0xb34 -#define DMA4_WORD0_CMP_ENABLE 0xb44 -#define DMA_WORD0_CMP_ENABLE(chan) (DMA_SREG(DMA0_WORD0_CMP_ENABLE,chan)) - -#define DMA0_WORD1_CMP_VALUE 0xb08 -#define DMA1_WORD1_CMP_VALUE 0xb18 -#define DMA2_WORD1_CMP_VALUE 0xb28 -#define DMA3_WORD1_CMP_VALUE 0xb38 -#define DMA4_WORD1_CMP_VALUE 0xb48 -#define DMA_WORD1_CMP_VALUE(chan) (DMA_SREG(DMA0_WORD1_CMP_VALUE, chan)) - -#define DMA0_WORD1_CMP_ENABLE 0xb0c -#define DMA1_WORD1_CMP_ENABLE 0xb1c -#define DMA2_WORD1_CMP_ENABLE 0xb2c -#define DMA3_WORD1_CMP_ENABLE 0xb3c -#define DMA4_WORD1_CMP_ENABLE 0xb4c -#define DMA_WORD1_CMP_ENABLE(chan) (DMA_SREG(DMA0_WORD1_CMP_ENABLE,chan)) -/* word 1 compare enable flags */ -#define DMA_WORD1_CMP_MATCH_OTHERBUS (1<<15) -#define DMA_WORD1_CMP_MATCH_BROADCAST (1<<14) -#define DMA_WORD1_CMP_MATCH_BUS_BCAST (1<<13) -#define DMA_WORD1_CMP_MATCH_LOCAL_NODE (1<<12) -#define DMA_WORD1_CMP_MATCH_EXACT (1<<11) -#define DMA_WORD1_CMP_ENABLE_SELF_ID (1<<10) -#define DMA_WORD1_CMP_ENABLE_MASTER (1<<8) - -#define LINK_ID 0xf00 -#define LINK_ID_BUS(id) (id<<22) -#define LINK_ID_NODE(id) (id<<16) - -#define LINK_CONTROL 0xf04 -#define LINK_CONTROL_BUSY (1<<29) -#define LINK_CONTROL_TX_ISO_EN (1<<26) -#define LINK_CONTROL_RX_ISO_EN (1<<25) -#define LINK_CONTROL_TX_ASYNC_EN (1<<24) -#define LINK_CONTROL_RX_ASYNC_EN (1<<23) -#define LINK_CONTROL_RESET_TX (1<<21) -#define LINK_CONTROL_RESET_RX (1<<20) -#define LINK_CONTROL_CYCMASTER (1<<11) -#define LINK_CONTROL_CYCSOURCE (1<<10) -#define LINK_CONTROL_CYCTIMEREN (1<<9) -#define LINK_CONTROL_RCV_CMP_VALID (1<<7) -#define LINK_CONTROL_SNOOP_ENABLE (1<<6) - -#define CYCLE_TIMER 0xf08 - -#define LINK_PHY 0xf0c -#define LINK_PHY_READ (1<<31) -#define LINK_PHY_WRITE (1<<30) -#define LINK_PHY_ADDR(addr) (addr<<24) -#define LINK_PHY_WDATA(data) (data<<16) -#define LINK_PHY_RADDR(addr) (addr<<8) - - -#define LINK_INT_STATUS 0xf14 -#define LINK_INT_ENABLE 0xf18 -/* status and enable have identical bit numbers */ -#define LINK_INT_LINK_INT (1<<31) -#define LINK_INT_PHY_TIMEOUT (1<<30) -#define LINK_INT_PHY_REG_RCVD (1<<29) -#define LINK_INT_PHY_BUSRESET (1<<28) -#define LINK_INT_TX_RDY (1<<26) -#define LINK_INT_RX_DATA_RDY (1<<25) -#define LINK_INT_ISO_STUCK (1<<20) -#define LINK_INT_ASYNC_STUCK (1<<19) -#define LINK_INT_SENT_REJECT (1<<17) -#define LINK_INT_HDR_ERR (1<<16) -#define LINK_INT_TX_INVALID_TC (1<<15) -#define LINK_INT_CYC_SECOND (1<<11) -#define LINK_INT_CYC_START (1<<10) -#define LINK_INT_CYC_DONE (1<<9) -#define LINK_INT_CYC_PENDING (1<<8) -#define LINK_INT_CYC_LOST (1<<7) -#define LINK_INT_CYC_ARB_FAILED (1<<6) -#define LINK_INT_GRF_OVERFLOW (1<<5) -#define LINK_INT_ITF_UNDERFLOW (1<<4) -#define LINK_INT_ATF_UNDERFLOW (1<<3) -#define LINK_INT_ISOARB_FAILED (1<<0) - -/* PHY specifics */ -#define PHY_VENDORID_TI 0x800028 -#define PHY_PRODUCTID_TSB41LV03 0x000000 - - -/* this is the physical layout of a PCL, its size is 128 bytes */ -struct ti_pcl { - u32 next; - u32 async_error_next; - u32 user_data; - u32 pcl_status; - u32 remaining_transfer_count; - u32 next_data_buffer; - struct { - u32 control; - u32 pointer; - } buffer[13] __attribute__ ((packed)); -} __attribute__ ((packed)); - -#include -#define pcloffs(MEMBER) (offsetof(struct ti_pcl, MEMBER)) - - -static inline void put_pcl(const struct ti_lynx *lynx, pcl_t pclid, - const struct ti_pcl *pcl) -{ - memcpy_le32((u32 *)(lynx->pcl_mem + pclid * sizeof(struct ti_pcl)), - (u32 *)pcl, sizeof(struct ti_pcl)); -} - -static inline void get_pcl(const struct ti_lynx *lynx, pcl_t pclid, - struct ti_pcl *pcl) -{ - memcpy_le32((u32 *)pcl, - (u32 *)(lynx->pcl_mem + pclid * sizeof(struct ti_pcl)), - sizeof(struct ti_pcl)); -} - -static inline u32 pcl_bus(const struct ti_lynx *lynx, pcl_t pclid) -{ - return lynx->pcl_mem_dma + pclid * sizeof(struct ti_pcl); -} - - -#if defined (__BIG_ENDIAN) -typedef struct ti_pcl pcltmp_t; - -static inline struct ti_pcl *edit_pcl(const struct ti_lynx *lynx, pcl_t pclid, - pcltmp_t *tmp) -{ - get_pcl(lynx, pclid, tmp); - return tmp; -} - -static inline void commit_pcl(const struct ti_lynx *lynx, pcl_t pclid, - pcltmp_t *tmp) -{ - put_pcl(lynx, pclid, tmp); -} - -#else -typedef int pcltmp_t; /* just a dummy */ - -static inline struct ti_pcl *edit_pcl(const struct ti_lynx *lynx, pcl_t pclid, - pcltmp_t *tmp) -{ - return lynx->pcl_mem + pclid * sizeof(struct ti_pcl); -} - -static inline void commit_pcl(const struct ti_lynx *lynx, pcl_t pclid, - pcltmp_t *tmp) -{ -} -#endif - - -static inline void run_sub_pcl(const struct ti_lynx *lynx, pcl_t pclid, int idx, - int dmachan) -{ - reg_write(lynx, DMA0_CURRENT_PCL + dmachan * 0x20, - pcl_bus(lynx, pclid) + idx * 4); - reg_write(lynx, DMA0_CHAN_CTRL + dmachan * 0x20, - DMA_CHAN_CTRL_ENABLE | DMA_CHAN_CTRL_LINK); -} - -static inline void run_pcl(const struct ti_lynx *lynx, pcl_t pclid, int dmachan) -{ - run_sub_pcl(lynx, pclid, 0, dmachan); -} - -#define PCL_NEXT_INVALID (1<<0) - -/* transfer commands */ -#define PCL_CMD_RCV (0x1<<24) -#define PCL_CMD_RCV_AND_UPDATE (0xa<<24) -#define PCL_CMD_XMT (0x2<<24) -#define PCL_CMD_UNFXMT (0xc<<24) -#define PCL_CMD_PCI_TO_LBUS (0x8<<24) -#define PCL_CMD_LBUS_TO_PCI (0x9<<24) - -/* aux commands */ -#define PCL_CMD_NOP (0x0<<24) -#define PCL_CMD_LOAD (0x3<<24) -#define PCL_CMD_STOREQ (0x4<<24) -#define PCL_CMD_STORED (0xb<<24) -#define PCL_CMD_STORE0 (0x5<<24) -#define PCL_CMD_STORE1 (0x6<<24) -#define PCL_CMD_COMPARE (0xe<<24) -#define PCL_CMD_SWAP_COMPARE (0xf<<24) -#define PCL_CMD_ADD (0xd<<24) -#define PCL_CMD_BRANCH (0x7<<24) - -/* BRANCH condition codes */ -#define PCL_COND_DMARDY_SET (0x1<<20) -#define PCL_COND_DMARDY_CLEAR (0x2<<20) - -#define PCL_GEN_INTR (1<<19) -#define PCL_LAST_BUFF (1<<18) -#define PCL_LAST_CMD (PCL_LAST_BUFF) -#define PCL_WAITSTAT (1<<17) -#define PCL_BIGENDIAN (1<<16) -#define PCL_ISOMODE (1<<12) - -#endif