X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=drivers%2Fmisc%2FKconfig;h=c6a753d576b7f176655b08104f533fa3d391f817;hb=7b9bf6f60fa7d127d9f5c04b713dcbcc7e88935d;hp=36a8f0d098e2df26e76abadde9df6ac1aa79b9c5;hpb=62f3aaf89d01bdc9ff0e67d92f3bf085143edf8c;p=karo-tx-uboot.git

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 36a8f0d098..c6a753d576 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -1,3 +1,25 @@
+#
+# Multifunction miscellaneous devices
+#
+
+menu "Multifunction device drivers"
+
+config MISC
+	bool "Enable Driver Model for Misc drivers"
+	depends on DM
+	help
+	  Enable driver model for miscellaneous devices. This class is
+	  used only for those do not fit other more general classes. A
+	  set of generic read, write and ioctl methods may be used to
+	  access the device.
+
+config ALTERA_SYSID
+	bool "Altera Sysid support"
+	depends on MISC
+	help
+	  Select this to enable a sysid for Altera devices. Please find
+	  details on the "Embedded Peripherals IP User Guide" of Altera.
+
 config CMD_CROS_EC
 	bool "Enable crosec command"
 	depends on CROS_EC
@@ -35,6 +57,15 @@ config CROS_EC_LPC
 	  through a legacy port interface, so on x86 machines the main
 	  function of the EC is power and thermal management.
 
+config CROS_EC_SANDBOX
+	bool "Enable Chrome OS EC sandbox driver"
+	depends on CROS_EC && SANDBOX
+	help
+	  Enable a sandbox emulation of the Chrome OS EC. This supports
+	  keyboard (use the -l flag to enable the LCD), verified boot context,
+	  EC flash read/write/erase support and a few other things. It is
+	  enough to perform a Chrome OS verified boot on sandbox.
+
 config CROS_EC_SPI
 	bool "Enable Chrome OS EC SPI driver"
 	depends on CROS_EC
@@ -44,20 +75,99 @@ config CROS_EC_SPI
 	  provides a faster and more robust interface than I2C but the bugs
 	  are less interesting.
 
-config DM_CROS_EC
-	bool "Enable Driver Model for Chrome OS EC"
-	depends on DM
-	help
-	  Enable driver model for the Chrome OS EC interface. This
-	  allows the cros_ec SPI driver to operate with CONFIG_DM_SPI
-	  but otherwise makes few changes. Since cros_ec also supports
-	  LPC (which doesn't support driver model yet), a full
-	  conversion is not yet possible.
-
-config CONFIG_FSL_SEC_MON
+config FSL_SEC_MON
 	bool "Enable FSL SEC_MON Driver"
 	help
 	  Freescale Security Monitor block is responsible for monitoring
 	  system states.
 	  Security Monitor can be transitioned on any security failures,
 	  like software violations or hardware security violations.
+
+config MXC_OCOTP
+	bool "Enable MXC OCOTP Driver"
+	help
+	  If you say Y here, you will get support for the One Time
+	  Programmable memory pages that are stored on the some
+	  Freescale i.MX processors.
+
+config NUVOTON_NCT6102D
+	bool "Enable Nuvoton NCT6102D Super I/O driver"
+	help
+	  If you say Y here, you will get support for the Nuvoton
+	  NCT6102D Super I/O driver. This can be used to enable or
+	  disable the legacy UART, the watchdog or other devices
+	  in the Nuvoton Super IO chips on X86 platforms.
+
+config PWRSEQ
+	bool "Enable power-sequencing drivers"
+	depends on DM
+	help
+	  Power-sequencing drivers provide support for controlling power for
+	  devices. They are typically referenced by a phandle from another
+	  device. When the device is started up, its power sequence can be
+	  initiated.
+
+config SPL_PWRSEQ
+	bool "Enable power-sequencing drivers for SPL"
+	depends on PWRSEQ
+	help
+	  Power-sequencing drivers provide support for controlling power for
+	  devices. They are typically referenced by a phandle from another
+	  device. When the device is started up, its power sequence can be
+	  initiated.
+
+config PCA9551_LED
+	bool "Enable PCA9551 LED driver"
+	help
+	  Enable driver for PCA9551 LED controller. This controller
+	  is connected via I2C. So I2C needs to be enabled.
+
+config PCA9551_I2C_ADDR
+	hex "I2C address of PCA9551 LED controller"
+	depends on PCA9551_LED
+	default 0x60
+	help
+	  The I2C address of the PCA9551 LED controller.
+
+config QCOM_SMEM
+	bool "Enable Qualcomm shared memory driver"
+
+config TEGRA_CAR
+	bool "Enable support for the Tegra CAR driver"
+	depends on TEGRA_NO_BPMP
+	help
+	  The Tegra CAR (Clock and Reset Controller) is a HW module that
+	  controls almost all clocks and resets in a Tegra SoC.
+
+config TEGRA186_BPMP
+	bool "Enable support for the Tegra186 BPMP driver"
+	depends on TEGRA186
+	help
+	  The Tegra BPMP (Boot and Power Management Processor) is a separate
+	  auxiliary CPU embedded into Tegra to perform power management work,
+	  and controls related features such as clocks, resets, power domains,
+	  PMIC I2C bus, etc. This driver provides the core low-level
+	  communication path by which feature-specific drivers (such as clock)
+	  can make requests to the BPMP. This driver is similar to an MFD
+	  driver in the Linux kernel.
+
+config WINBOND_W83627
+	bool "Enable Winbond Super I/O driver"
+	help
+	  If you say Y here, you will get support for the Winbond
+	  W83627 Super I/O driver. This can be used to enable the
+	  legacy UART or other devices in the Winbond Super IO chips
+	  on X86 platforms.
+
+config QFW
+	bool
+	help
+	  Hidden option to enable QEMU fw_cfg interface. This will be selected by
+	  either CONFIG_CMD_QFW or CONFIG_GENERATE_ACPI_TABLE.
+
+config I2C_EEPROM
+	bool "Enable driver for generic I2C-attached EEPROMs"
+	depends on MISC
+	help
+	  Enable a generic driver for EEPROMs attached via I2C.
+endmenu