X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=drivers%2Fmisc%2FKconfig;h=c6a753d576b7f176655b08104f533fa3d391f817;hb=7b9bf6f60fa7d127d9f5c04b713dcbcc7e88935d;hp=f29a16977426bf60f666cd2ec7816fd3008943e7;hpb=7c0e5d865ff0b86dfce492b656238919c659d756;p=karo-tx-uboot.git

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index f29a169774..c6a753d576 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -4,6 +4,22 @@
 
 menu "Multifunction device drivers"
 
+config MISC
+	bool "Enable Driver Model for Misc drivers"
+	depends on DM
+	help
+	  Enable driver model for miscellaneous devices. This class is
+	  used only for those do not fit other more general classes. A
+	  set of generic read, write and ioctl methods may be used to
+	  access the device.
+
+config ALTERA_SYSID
+	bool "Altera Sysid support"
+	depends on MISC
+	help
+	  Select this to enable a sysid for Altera devices. Please find
+	  details on the "Embedded Peripherals IP User Guide" of Altera.
+
 config CMD_CROS_EC
 	bool "Enable crosec command"
 	depends on CROS_EC
@@ -59,7 +75,7 @@ config CROS_EC_SPI
 	  provides a faster and more robust interface than I2C but the bugs
 	  are less interesting.
 
-config CONFIG_FSL_SEC_MON
+config FSL_SEC_MON
 	bool "Enable FSL SEC_MON Driver"
 	help
 	  Freescale Security Monitor block is responsible for monitoring
@@ -67,6 +83,39 @@ config CONFIG_FSL_SEC_MON
 	  Security Monitor can be transitioned on any security failures,
 	  like software violations or hardware security violations.
 
+config MXC_OCOTP
+	bool "Enable MXC OCOTP Driver"
+	help
+	  If you say Y here, you will get support for the One Time
+	  Programmable memory pages that are stored on the some
+	  Freescale i.MX processors.
+
+config NUVOTON_NCT6102D
+	bool "Enable Nuvoton NCT6102D Super I/O driver"
+	help
+	  If you say Y here, you will get support for the Nuvoton
+	  NCT6102D Super I/O driver. This can be used to enable or
+	  disable the legacy UART, the watchdog or other devices
+	  in the Nuvoton Super IO chips on X86 platforms.
+
+config PWRSEQ
+	bool "Enable power-sequencing drivers"
+	depends on DM
+	help
+	  Power-sequencing drivers provide support for controlling power for
+	  devices. They are typically referenced by a phandle from another
+	  device. When the device is started up, its power sequence can be
+	  initiated.
+
+config SPL_PWRSEQ
+	bool "Enable power-sequencing drivers for SPL"
+	depends on PWRSEQ
+	help
+	  Power-sequencing drivers provide support for controlling power for
+	  devices. They are typically referenced by a phandle from another
+	  device. When the device is started up, its power sequence can be
+	  initiated.
+
 config PCA9551_LED
 	bool "Enable PCA9551 LED driver"
 	help
@@ -80,13 +129,45 @@ config PCA9551_I2C_ADDR
 	help
 	  The I2C address of the PCA9551 LED controller.
 
-config RESET
-	bool "Enable support for reset drivers"
-	depends on DM
+config QCOM_SMEM
+	bool "Enable Qualcomm shared memory driver"
+
+config TEGRA_CAR
+	bool "Enable support for the Tegra CAR driver"
+	depends on TEGRA_NO_BPMP
+	help
+	  The Tegra CAR (Clock and Reset Controller) is a HW module that
+	  controls almost all clocks and resets in a Tegra SoC.
+
+config TEGRA186_BPMP
+	bool "Enable support for the Tegra186 BPMP driver"
+	depends on TEGRA186
 	help
-	  Enable reset drivers which can be used to reset the CPU or board.
-	  Each driver can provide a reset method which will be called to
-	  effect a reset. The uclass will try all available drivers when
-	  reset_walk() is called.
+	  The Tegra BPMP (Boot and Power Management Processor) is a separate
+	  auxiliary CPU embedded into Tegra to perform power management work,
+	  and controls related features such as clocks, resets, power domains,
+	  PMIC I2C bus, etc. This driver provides the core low-level
+	  communication path by which feature-specific drivers (such as clock)
+	  can make requests to the BPMP. This driver is similar to an MFD
+	  driver in the Linux kernel.
 
+config WINBOND_W83627
+	bool "Enable Winbond Super I/O driver"
+	help
+	  If you say Y here, you will get support for the Winbond
+	  W83627 Super I/O driver. This can be used to enable the
+	  legacy UART or other devices in the Winbond Super IO chips
+	  on X86 platforms.
+
+config QFW
+	bool
+	help
+	  Hidden option to enable QEMU fw_cfg interface. This will be selected by
+	  either CONFIG_CMD_QFW or CONFIG_GENERATE_ACPI_TABLE.
+
+config I2C_EEPROM
+	bool "Enable driver for generic I2C-attached EEPROMs"
+	depends on MISC
+	help
+	  Enable a generic driver for EEPROMs attached via I2C.
 endmenu