X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=drivers%2Fmtd%2Fbcm47xxpart.c;h=63feb75cc8e01d2048949343955023b01fc7fadc;hb=48476df99894492a0f7239f2f3c9a2dde4ff38e2;hp=e06d782489a621c34df343da1d6c04208feeb7e0;hpb=068a565afad3ae818cc0d5495479c4abccc7762c;p=karo-tx-linux.git

diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c
index e06d782489a6..63feb75cc8e0 100644
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -14,17 +14,11 @@
 #include <linux/slab.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <asm/mach-bcm47xx/nvram.h>
+#include <bcm47xx_nvram.h>
 
 /* 10 parts were found on sflash on Netgear WNDR4500 */
 #define BCM47XXPART_MAX_PARTS		12
 
-/*
- * Amount of bytes we read when analyzing each block of flash memory.
- * Set it big enough to allow detecting partition and reading important data.
- */
-#define BCM47XXPART_BYTES_TO_READ	0x404
-
 /* Magics */
 #define BOARD_DATA_MAGIC		0x5246504D	/* MPFR */
 #define POT_MAGIC1			0x54544f50	/* POTT */
@@ -59,13 +53,21 @@ static int bcm47xxpart_parse(struct mtd_info *master,
 	uint32_t *buf;
 	size_t bytes_read;
 	uint32_t offset;
-	uint32_t blocksize = 0x10000;
+	uint32_t blocksize = master->erasesize;
 	struct trx_header *trx;
+	int trx_part = -1;
+	int last_trx_part = -1;
+	int max_bytes_to_read = 0x8004;
+
+	if (blocksize <= 0x10000)
+		blocksize = 0x10000;
+	if (blocksize == 0x20000)
+		max_bytes_to_read = 0x18004;
 
 	/* Alloc */
 	parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS,
 			GFP_KERNEL);
-	buf = kzalloc(BCM47XXPART_BYTES_TO_READ, GFP_KERNEL);
+	buf = kzalloc(max_bytes_to_read, GFP_KERNEL);
 
 	/* Parse block by block looking for magics */
 	for (offset = 0; offset <= master->size - blocksize;
@@ -80,7 +82,7 @@ static int bcm47xxpart_parse(struct mtd_info *master,
 		}
 
 		/* Read beginning of the block */
-		if (mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ,
+		if (mtd_read(master, offset, max_bytes_to_read,
 			     &bytes_read, (uint8_t *)buf) < 0) {
 			pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
 			       offset);
@@ -95,9 +97,16 @@ static int bcm47xxpart_parse(struct mtd_info *master,
 		}
 
 		/* Standard NVRAM */
-		if (buf[0x000 / 4] == NVRAM_HEADER) {
+		if (buf[0x000 / 4] == NVRAM_HEADER ||
+		    buf[0x1000 / 4] == NVRAM_HEADER ||
+		    buf[0x8000 / 4] == NVRAM_HEADER ||
+		    (blocksize == 0x20000 && (
+		      buf[0x10000 / 4] == NVRAM_HEADER ||
+		      buf[0x11000 / 4] == NVRAM_HEADER ||
+		      buf[0x18000 / 4] == NVRAM_HEADER))) {
 			bcm47xxpart_add_part(&parts[curr_part++], "nvram",
 					     offset, 0);
+			offset = rounddown(offset, blocksize);
 			continue;
 		}
 
@@ -131,6 +140,10 @@ static int bcm47xxpart_parse(struct mtd_info *master,
 		if (buf[0x000 / 4] == TRX_MAGIC) {
 			trx = (struct trx_header *)buf;
 
+			trx_part = curr_part;
+			bcm47xxpart_add_part(&parts[curr_part++], "firmware",
+					     offset, 0);
+
 			i = 0;
 			/* We have LZMA loader if offset[2] points to sth */
 			if (trx->offset[2]) {
@@ -154,6 +167,8 @@ static int bcm47xxpart_parse(struct mtd_info *master,
 					     offset + trx->offset[i], 0);
 			i++;
 
+			last_trx_part = curr_part - 1;
+
 			/*
 			 * We have whole TRX scanned, skip to the next part. Use
 			 * roundown (not roundup), as the loop will increase
@@ -169,11 +184,15 @@ static int bcm47xxpart_parse(struct mtd_info *master,
 	 * Assume that partitions end at the beginning of the one they are
 	 * followed by.
 	 */
-	for (i = 0; i < curr_part - 1; i++)
-		parts[i].size = parts[i + 1].offset - parts[i].offset;
-	if (curr_part > 0)
-		parts[curr_part - 1].size =
-				master->size - parts[curr_part - 1].offset;
+	for (i = 0; i < curr_part; i++) {
+		u64 next_part_offset = (i < curr_part - 1) ?
+				       parts[i + 1].offset : master->size;
+
+		parts[i].size = next_part_offset - parts[i].offset;
+		if (i == last_trx_part && trx_part >= 0)
+			parts[trx_part].size = next_part_offset -
+					       parts[trx_part].offset;
+	}
 
 	*pparts = parts;
 	return curr_part;