X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=drivers%2Fmtd%2Fnand%2Fnand_base.c;h=d952f9c9d2c8863d853417e12313780cb1f93cc2;hb=11534561af85a9d6a0b54168dcdee6b51c31de84;hp=5aaea904c204bed97273f495a5ed331a77e9ebdf;hpb=782323c470d7836ff31d1cd7fa978ef161e9cf66;p=karo-tx-uboot.git diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 5aaea904c2..d952f9c9d2 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -29,26 +29,6 @@ * */ -#ifndef __UBOOT__ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#else #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include #include @@ -65,19 +45,7 @@ #include #include -/* - * CONFIG_SYS_NAND_RESET_CNT is used as a timeout mechanism when resetting - * a flash. NAND flash is initialized prior to interrupts so standard timers - * can't be used. CONFIG_SYS_NAND_RESET_CNT should be set to a value - * which is greater than (max NAND reset time / NAND status read time). - * A conservative default of 200000 (500 us / 25 ns) is used as a default. - */ -#ifndef CONFIG_SYS_NAND_RESET_CNT -#define CONFIG_SYS_NAND_RESET_CNT 200000 -#endif - static bool is_module_text_address(unsigned long addr) {return 0;} -#endif /* Define default oob placement schemes for large and small page devices */ static struct nand_ecclayout nand_oob_8 = { @@ -165,17 +133,8 @@ static void nand_release_device(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; -#ifndef __UBOOT__ - /* Release the controller and the chip */ - spin_lock(&chip->controller->lock); - chip->controller->active = NULL; - chip->state = FL_READY; - wake_up(&chip->controller->wq); - spin_unlock(&chip->controller->lock); -#else /* De-select the NAND device */ chip->select_chip(mtd, -1); -#endif } /** @@ -184,18 +143,13 @@ static void nand_release_device(struct mtd_info *mtd) * * Default read function for 8bit buswidth */ -#ifndef __UBOOT__ -static uint8_t nand_read_byte(struct mtd_info *mtd) -#else uint8_t nand_read_byte(struct mtd_info *mtd) -#endif { struct nand_chip *chip = mtd->priv; return readb(chip->IO_ADDR_R); } /** - * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip * @mtd: MTD device structure * @@ -288,7 +242,7 @@ static void nand_write_byte16(struct mtd_info *mtd, uint8_t byte) chip->write_buf(mtd, (uint8_t *)&word, 2); } -#if defined(__UBOOT__) && !defined(CONFIG_BLACKFIN) +#if !defined(CONFIG_BLACKFIN) static void iowrite8_rep(void *addr, const uint8_t *buf, int len) { int i; @@ -331,11 +285,7 @@ static void iowrite16_rep(void *addr, void *buf, int len) * * Default write function for 8bit buswidth. */ -#ifndef __UBOOT__ -static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) -#else void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) -#endif { struct nand_chip *chip = mtd->priv; @@ -350,62 +300,13 @@ void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) * * Default read function for 8bit buswidth. */ -#ifndef __UBOOT__ -static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) -#else void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) -#endif { struct nand_chip *chip = mtd->priv; ioread8_rep(chip->IO_ADDR_R, buf, len); } -#ifdef __UBOOT__ -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) -/** - * nand_verify_buf - [DEFAULT] Verify chip data against buffer - * @mtd: MTD device structure - * @buf: buffer containing the data to compare - * @len: number of bytes to compare - * - * Default verify function for 8bit buswidth. - */ -static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len) -{ - int i; - struct nand_chip *chip = mtd->priv; - - for (i = 0; i < len; i++) - if (buf[i] != readb(chip->IO_ADDR_R)) - return -EFAULT; - return 0; -} - -/** - * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer - * @mtd: MTD device structure - * @buf: buffer containing the data to compare - * @len: number of bytes to compare - * - * Default verify function for 16bit buswidth. - */ -static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) -{ - int i; - struct nand_chip *chip = mtd->priv; - u16 *p = (u16 *) buf; - len >>= 1; - - for (i = 0; i < len; i++) - if (p[i] != readw(chip->IO_ADDR_R)) - return -EFAULT; - - return 0; -} -#endif -#endif - /** * nand_write_buf16 - [DEFAULT] write buffer to chip * @mtd: MTD device structure @@ -414,11 +315,7 @@ static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) * * Default write function for 16bit buswidth. */ -#ifndef __UBOOT__ -static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) -#else void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) -#endif { struct nand_chip *chip = mtd->priv; u16 *p = (u16 *) buf; @@ -434,11 +331,7 @@ void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) * * Default read function for 16bit buswidth. */ -#ifndef __UBOOT__ -static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len) -#else void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len) -#endif { struct nand_chip *chip = mtd->priv; u16 *p = (u16 *) buf; @@ -522,7 +415,7 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) uint8_t buf[2] = { 0, 0 }; int ret = 0, res, i = 0; - ops.datbuf = NULL; + memset(&ops, 0, sizeof(ops)); ops.oobbuf = buf; ops.ooboffs = chip->badblockpos; if (chip->options & NAND_BUSWIDTH_16) { @@ -619,6 +512,23 @@ static int nand_check_wp(struct mtd_info *mtd) return (chip->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1; } +/** + * nand_block_isreserved - [GENERIC] Check if a block is marked reserved. + * @mtd: MTD device structure + * @ofs: offset from device start + * + * Check if the block is marked as reserved. + */ +static int nand_block_isreserved(struct mtd_info *mtd, loff_t ofs) +{ + struct nand_chip *chip = mtd->priv; + + if (!chip->bbt) + return 0; + /* Return info from the table */ + return nand_isreserved_bbt(mtd, ofs); +} + /** * nand_block_checkbad - [GENERIC] Check if a block is marked bad * @mtd: MTD device structure @@ -647,50 +557,10 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip, return nand_isbad_bbt(mtd, ofs, allowbbt); } -#ifndef __UBOOT__ -/** - * panic_nand_wait_ready - [GENERIC] Wait for the ready pin after commands. - * @mtd: MTD device structure - * @timeo: Timeout - * - * Helper function for nand_wait_ready used when needing to wait in interrupt - * context. - */ -static void panic_nand_wait_ready(struct mtd_info *mtd, unsigned long timeo) -{ - struct nand_chip *chip = mtd->priv; - int i; - - /* Wait for the device to get ready */ - for (i = 0; i < timeo; i++) { - if (chip->dev_ready(mtd)) - break; - touch_softlockup_watchdog(); - mdelay(1); - } -} -#endif - /* Wait for the ready pin, after a command. The timeout is caught later. */ void nand_wait_ready(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; -#ifndef __UBOOT__ - unsigned long timeo = jiffies + msecs_to_jiffies(20); - - /* 400ms timeout */ - if (in_interrupt() || oops_in_progress) - return panic_nand_wait_ready(mtd, 400); - - led_trigger_event(nand_led_trigger, LED_FULL); - /* Wait until command is processed or timeout occurs */ - do { - if (chip->dev_ready(mtd)) - break; - touch_softlockup_watchdog(); - } while (time_before(jiffies, timeo)); - led_trigger_event(nand_led_trigger, LED_OFF); -#else u32 timeo = (CONFIG_SYS_HZ * 20) / 1000; u32 time_start; @@ -701,10 +571,30 @@ void nand_wait_ready(struct mtd_info *mtd) if (chip->dev_ready(mtd)) break; } -#endif } EXPORT_SYMBOL_GPL(nand_wait_ready); +/** + * nand_wait_status_ready - [GENERIC] Wait for the ready status after commands. + * @mtd: MTD device structure + * @timeo: Timeout in ms + * + * Wait for status ready (i.e. command done) or timeout. + */ +static void nand_wait_status_ready(struct mtd_info *mtd, unsigned long timeo) +{ + register struct nand_chip *chip = mtd->priv; + u32 time_start; + + timeo = (CONFIG_SYS_HZ * timeo) / 1000; + time_start = get_timer(0); + while (get_timer(time_start) < timeo) { + if ((chip->read_byte(mtd) & NAND_STATUS_READY)) + break; + WATCHDOG_RESET(); + } +}; + /** * nand_command - [DEFAULT] Send command to NAND device * @mtd: MTD device structure @@ -720,7 +610,6 @@ static void nand_command(struct mtd_info *mtd, unsigned int command, { register struct nand_chip *chip = mtd->priv; int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE; - uint32_t rst_sts_cnt = CONFIG_SYS_NAND_RESET_CNT; /* Write out the command to the device */ if (command == NAND_CMD_SEQIN) { @@ -784,8 +673,8 @@ static void nand_command(struct mtd_info *mtd, unsigned int command, NAND_CTRL_CLE | NAND_CTRL_CHANGE); chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); - while (!(chip->read_byte(mtd) & NAND_STATUS_READY) && - (rst_sts_cnt--)); + /* EZ-NAND can take upto 250ms as per ONFi v4.0 */ + nand_wait_status_ready(mtd, 250); return; /* This applies to read commands */ @@ -823,7 +712,6 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command, int column, int page_addr) { register struct nand_chip *chip = mtd->priv; - uint32_t rst_sts_cnt = CONFIG_SYS_NAND_RESET_CNT; /* Emulate NAND_CMD_READOOB */ if (command == NAND_CMD_READOOB) { @@ -861,7 +749,7 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command, /* * Program and erase have their own busy handlers status, sequential - * in, and deplete1 need no delay. + * in and status need no delay. */ switch (command) { @@ -882,8 +770,8 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command, NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); - while (!(chip->read_byte(mtd) & NAND_STATUS_READY) && - (rst_sts_cnt--)); + /* EZ-NAND can take upto 250ms as per ONFi v4.0 */ + nand_wait_status_ready(mtd, 250); return; case NAND_CMD_RNDOUT: @@ -948,39 +836,8 @@ static int nand_get_device(struct mtd_info *mtd, int new_state) { struct nand_chip *chip = mtd->priv; -#ifndef __UBOOT__ - spinlock_t *lock = &chip->controller->lock; - wait_queue_head_t *wq = &chip->controller->wq; - DECLARE_WAITQUEUE(wait, current); -retry: - spin_lock(lock); - - /* Hardware controller shared among independent devices */ - if (!chip->controller->active) - chip->controller->active = chip; - - if (chip->controller->active == chip && chip->state == FL_READY) { - chip->state = new_state; - spin_unlock(lock); - return 0; - } - if (new_state == FL_PM_SUSPENDED) { - if (chip->controller->active->state == FL_PM_SUSPENDED) { - chip->state = FL_PM_SUSPENDED; - spin_unlock(lock); - return 0; - } - } - set_current_state(TASK_UNINTERRUPTIBLE); - add_wait_queue(wq, &wait); - spin_unlock(lock); - schedule(); - remove_wait_queue(wq, &wait); - goto retry; -#else chip->state = new_state; return 0; -#endif } /** @@ -1034,23 +891,6 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); -#ifndef __UBOOT__ - if (in_interrupt() || oops_in_progress) - panic_nand_wait(mtd, chip, timeo); - else { - timeo = jiffies + msecs_to_jiffies(timeo); - while (time_before(jiffies, timeo)) { - if (chip->dev_ready) { - if (chip->dev_ready(mtd)) - break; - } else { - if (chip->read_byte(mtd) & NAND_STATUS_READY) - break; - } - cond_resched(); - } - } -#else u32 timer = (CONFIG_SYS_HZ * timeo) / 1000; u32 time_start; @@ -1064,7 +904,6 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) break; } } -#endif led_trigger_event(nand_led_trigger, LED_OFF); status = (int)chip->read_byte(mtd); @@ -1073,162 +912,6 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) return status; } -#ifndef __UBOOT__ -/** - * __nand_unlock - [REPLACEABLE] unlocks specified locked blocks - * @mtd: mtd info - * @ofs: offset to start unlock from - * @len: length to unlock - * @invert: when = 0, unlock the range of blocks within the lower and - * upper boundary address - * when = 1, unlock the range of blocks outside the boundaries - * of the lower and upper boundary address - * - * Returs unlock status. - */ -static int __nand_unlock(struct mtd_info *mtd, loff_t ofs, - uint64_t len, int invert) -{ - int ret = 0; - int status, page; - struct nand_chip *chip = mtd->priv; - - /* Submit address of first page to unlock */ - page = ofs >> chip->page_shift; - chip->cmdfunc(mtd, NAND_CMD_UNLOCK1, -1, page & chip->pagemask); - - /* Submit address of last page to unlock */ - page = (ofs + len) >> chip->page_shift; - chip->cmdfunc(mtd, NAND_CMD_UNLOCK2, -1, - (page | invert) & chip->pagemask); - - /* Call wait ready function */ - status = chip->waitfunc(mtd, chip); - /* See if device thinks it succeeded */ - if (status & NAND_STATUS_FAIL) { - pr_debug("%s: error status = 0x%08x\n", - __func__, status); - ret = -EIO; - } - - return ret; -} - -/** - * nand_unlock - [REPLACEABLE] unlocks specified locked blocks - * @mtd: mtd info - * @ofs: offset to start unlock from - * @len: length to unlock - * - * Returns unlock status. - */ -int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) -{ - int ret = 0; - int chipnr; - struct nand_chip *chip = mtd->priv; - - pr_debug("%s: start = 0x%012llx, len = %llu\n", - __func__, (unsigned long long)ofs, len); - - if (check_offs_len(mtd, ofs, len)) - ret = -EINVAL; - - /* Align to last block address if size addresses end of the device */ - if (ofs + len == mtd->size) - len -= mtd->erasesize; - - nand_get_device(mtd, FL_UNLOCKING); - - /* Shift to get chip number */ - chipnr = ofs >> chip->chip_shift; - - chip->select_chip(mtd, chipnr); - - /* Check, if it is write protected */ - if (nand_check_wp(mtd)) { - pr_debug("%s: device is write protected!\n", - __func__); - ret = -EIO; - goto out; - } - - ret = __nand_unlock(mtd, ofs, len, 0); - -out: - chip->select_chip(mtd, -1); - nand_release_device(mtd); - - return ret; -} -EXPORT_SYMBOL(nand_unlock); - -/** - * nand_lock - [REPLACEABLE] locks all blocks present in the device - * @mtd: mtd info - * @ofs: offset to start unlock from - * @len: length to unlock - * - * This feature is not supported in many NAND parts. 'Micron' NAND parts do - * have this feature, but it allows only to lock all blocks, not for specified - * range for block. Implementing 'lock' feature by making use of 'unlock', for - * now. - * - * Returns lock status. - */ -int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) -{ - int ret = 0; - int chipnr, status, page; - struct nand_chip *chip = mtd->priv; - - pr_debug("%s: start = 0x%012llx, len = %llu\n", - __func__, (unsigned long long)ofs, len); - - if (check_offs_len(mtd, ofs, len)) - ret = -EINVAL; - - nand_get_device(mtd, FL_LOCKING); - - /* Shift to get chip number */ - chipnr = ofs >> chip->chip_shift; - - chip->select_chip(mtd, chipnr); - - /* Check, if it is write protected */ - if (nand_check_wp(mtd)) { - pr_debug("%s: device is write protected!\n", - __func__); - status = MTD_ERASE_FAILED; - ret = -EIO; - goto out; - } - - /* Submit address of first page to lock */ - page = ofs >> chip->page_shift; - chip->cmdfunc(mtd, NAND_CMD_LOCK, -1, page & chip->pagemask); - - /* Call wait ready function */ - status = chip->waitfunc(mtd, chip); - /* See if device thinks it succeeded */ - if (status & NAND_STATUS_FAIL) { - pr_debug("%s: error status = 0x%08x\n", - __func__, status); - ret = -EIO; - goto out; - } - - ret = __nand_unlock(mtd, ofs, len, 0x1); - -out: - chip->select_chip(mtd, -1); - nand_release_device(mtd); - - return ret; -} -EXPORT_SYMBOL(nand_lock); -#endif - /** * nand_read_page_raw - [INTERN] read raw page data without ecc * @mtd: mtd info structure @@ -1386,8 +1069,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, * ecc.pos. Let's make sure that there are no gaps in ECC positions. */ for (i = 0; i < eccfrag_len - 1; i++) { - if (eccpos[i + start_step * chip->ecc.bytes] + 1 != - eccpos[i + start_step * chip->ecc.bytes + 1]) { + if (eccpos[i + index] + 1 != eccpos[i + index + 1]) { gaps = 1; break; } @@ -1683,6 +1365,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, mtd->oobavail : mtd->oobsize; uint8_t *bufpoi, *oob, *buf; + int use_bufpoi; unsigned int max_bitflips = 0; int retry_mode = 0; bool ecc_fail = false; @@ -1706,9 +1389,18 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, bytes = min(mtd->writesize - col, readlen); aligned = (bytes == mtd->writesize); + if (!aligned) + use_bufpoi = 1; + else + use_bufpoi = 0; + /* Is the current page in the buffer? */ if (realpage != chip->pagebuf || oob) { - bufpoi = aligned ? buf : chip->buffers->databuf; + bufpoi = use_bufpoi ? chip->buffers->databuf : buf; + + if (use_bufpoi && aligned) + pr_debug("%s: using read bounce buffer for buf@%p\n", + __func__, buf); read_retry: chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page); @@ -1730,7 +1422,7 @@ read_retry: ret = chip->ecc.read_page(mtd, chip, bufpoi, oob_required, page); if (ret < 0) { - if (!aligned) + if (use_bufpoi) /* Invalidate page cache */ chip->pagebuf = -1; break; @@ -1739,7 +1431,7 @@ read_retry: max_bitflips = max_t(unsigned int, max_bitflips, ret); /* Transfer not aligned data */ - if (!aligned) { + if (use_bufpoi) { if (!NAND_HAS_SUBPAGE_READ(chip) && !oob && !(mtd->ecc_stats.failed - ecc_failures) && (ops->mode != MTD_OPS_RAW)) { @@ -1853,9 +1545,9 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len, int ret; nand_get_device(mtd, FL_READING); + memset(&ops, 0, sizeof(ops)); ops.len = len; ops.datbuf = buf; - ops.oobbuf = NULL; ops.mode = MTD_OPS_PLACE_OOB; ret = nand_do_read_ops(mtd, from, &ops); *retlen = ops.retlen; @@ -1887,11 +1579,10 @@ static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, int page) { - uint8_t *buf = chip->oob_poi; int length = mtd->oobsize; int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad; int eccsize = chip->ecc.size; - uint8_t *bufpoi = buf; + uint8_t *bufpoi = chip->oob_poi; int i, toread, sndrnd = 0, pos; chip->cmdfunc(mtd, NAND_CMD_READ0, chip->ecc.size, page); @@ -2264,7 +1955,7 @@ static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, /** - * nand_write_subpage_hwecc - [REPLACABLE] hardware ECC based subpage write + * nand_write_subpage_hwecc - [REPLACEABLE] hardware ECC based subpage write * @mtd: mtd info structure * @chip: nand chip info structure * @offset: column address of subpage within the page @@ -2435,20 +2126,6 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, status = chip->waitfunc(mtd, chip); } - -#ifdef __UBOOT__ -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - /* Send command to read back the data */ - chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); - - if (chip->verify_buf(mtd, buf, mtd->writesize)) - return -EIO; - - /* Make sure the next page prog is preceded by a status read */ - chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); -#endif -#endif - return 0; } @@ -2538,13 +2215,8 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, if (!writelen) return 0; -#ifndef __UBOOT__ - /* Reject writes, which are not page aligned */ - if (NOTALIGNED(to) || NOTALIGNED(ops->len)) { -#else /* Reject writes, which are not page aligned */ if (NOTALIGNED(to)) { -#endif pr_notice("%s: attempt to write non page aligned data\n", __func__); return -EINVAL; @@ -2566,8 +2238,8 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, blockmask = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1; /* Invalidate the page cache, when we write to the cached page */ - if (to <= (chip->pagebuf << chip->page_shift) && - (chip->pagebuf << chip->page_shift) < (to + ops->len)) + if (to <= ((loff_t)chip->pagebuf << chip->page_shift) && + ((loff_t)chip->pagebuf << chip->page_shift) < (to + ops->len)) chip->pagebuf = -1; /* Don't allow multipage oob writes with offset */ @@ -2580,12 +2252,22 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, int bytes = mtd->writesize; int cached = writelen > bytes && page != blockmask; uint8_t *wbuf = buf; + int use_bufpoi; + int part_pagewr = (column || writelen < (mtd->writesize - 1)); + + if (part_pagewr) + use_bufpoi = 1; + else + use_bufpoi = 0; WATCHDOG_RESET(); - /* Partial page write? */ - if (unlikely(column || writelen < (mtd->writesize - 1))) { + /* Partial page write?, or need to use bounce buffer */ + if (use_bufpoi) { + pr_debug("%s: using write bounce buffer for buf@%p\n", + __func__, buf); cached = 0; - bytes = min_t(int, bytes - column, (int) writelen); + if (part_pagewr) + bytes = min_t(int, bytes - column, writelen); chip->pagebuf = -1; memset(chip->buffers->databuf, 0xff, mtd->writesize); memcpy(&chip->buffers->databuf[column], buf, bytes); @@ -2656,9 +2338,9 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len, /* Grab the device */ panic_nand_get_device(chip, mtd, FL_WRITING); + memset(&ops, 0, sizeof(ops)); ops.len = len; ops.datbuf = (uint8_t *)buf; - ops.oobbuf = NULL; ops.mode = MTD_OPS_PLACE_OOB; ret = nand_do_write_ops(mtd, to, &ops); @@ -2684,9 +2366,9 @@ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len, int ret; nand_get_device(mtd, FL_WRITING); + memset(&ops, 0, sizeof(ops)); ops.len = len; ops.datbuf = (uint8_t *)buf; - ops.oobbuf = NULL; ops.mode = MTD_OPS_PLACE_OOB; ret = nand_do_write_ops(mtd, to, &ops); *retlen = ops.retlen; @@ -2823,18 +2505,20 @@ out: } /** - * single_erase_cmd - [GENERIC] NAND standard block erase command function + * single_erase - [GENERIC] NAND standard block erase command function * @mtd: MTD device structure * @page: the page address of the block which will be erased * - * Standard erase command for NAND chips. + * Standard erase command for NAND chips. Returns NAND status. */ -static void single_erase_cmd(struct mtd_info *mtd, int page) +static int single_erase(struct mtd_info *mtd, int page) { struct nand_chip *chip = mtd->priv; /* Send commands to erase a block */ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page); chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1); + + return chip->waitfunc(mtd, chip); } /** @@ -2917,9 +2601,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, (page + pages_per_block)) chip->pagebuf = -1; - chip->erase_cmd(mtd, page & chip->pagemask); - - status = chip->waitfunc(mtd, chip); + status = chip->erase(mtd, page & chip->pagemask); /* * See if operation failed and additional status checks are @@ -3072,32 +2754,6 @@ static int nand_onfi_get_features(struct mtd_info *mtd, struct nand_chip *chip, return 0; } -#ifndef __UBOOT__ -/** - * nand_suspend - [MTD Interface] Suspend the NAND flash - * @mtd: MTD device structure - */ -static int nand_suspend(struct mtd_info *mtd) -{ - return nand_get_device(mtd, FL_PM_SUSPENDED); -} - -/** - * nand_resume - [MTD Interface] Resume the NAND flash - * @mtd: MTD device structure - */ -static void nand_resume(struct mtd_info *mtd) -{ - struct nand_chip *chip = mtd->priv; - - if (chip->state == FL_PM_SUSPENDED) - nand_release_device(mtd); - else - pr_err("%s called for a chip which is not in suspended state\n", - __func__); -} -#endif - /* Set default functions */ static void nand_set_defaults(struct nand_chip *chip, int busw) { @@ -3139,12 +2795,6 @@ static void nand_set_defaults(struct nand_chip *chip, int busw) chip->read_buf = busw ? nand_read_buf16 : nand_read_buf; if (!chip->scan_bbt) chip->scan_bbt = nand_default_bbt; -#ifdef __UBOOT__ -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - if (!chip->verify_buf) - chip->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf; -#endif -#endif if (!chip->controller) { chip->controller = &chip->hwcontrol; @@ -3155,11 +2805,7 @@ static void nand_set_defaults(struct nand_chip *chip, int busw) } /* Sanitize ONFI strings so we can safely print them */ -#ifndef __UBOOT__ -static void sanitize_string(uint8_t *s, size_t len) -#else static void sanitize_string(char *s, size_t len) -#endif { ssize_t i; @@ -3225,11 +2871,7 @@ static int nand_flash_detect_ext_param_page(struct mtd_info *mtd, * Check the signature. * Do not strictly follow the ONFI spec, maybe changed in future. */ -#ifndef __UBOOT__ - if (strncmp(ep->sig, "EPPS", 4)) { -#else if (strncmp((char *)ep->sig, "EPPS", 4)) { -#endif pr_debug("The signature is invalid.\n"); goto ext_out; } @@ -3760,11 +3402,7 @@ static inline bool is_full_id_nand(struct nand_flash_dev *type) static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip, struct nand_flash_dev *type, u8 *id_data, int *busw) { -#ifndef __UBOOT__ - if (!strncmp(type->id, id_data, type->id_len)) { -#else if (!strncmp((char *)type->id, (char *)id_data, type->id_len)) { -#endif mtd->writesize = type->pagesize; mtd->erasesize = type->erasesize; mtd->oobsize = type->oobsize; @@ -3774,6 +3412,8 @@ static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip, chip->options |= type->options; chip->ecc_strength_ds = NAND_ECC_STRENGTH(type); chip->ecc_step_ds = NAND_ECC_STEP(type); + chip->onfi_timing_mode_default = + type->onfi_timing_mode_default; *busw = type->options & NAND_BUSWIDTH_16; @@ -3846,7 +3486,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, chip->onfi_version = 0; if (!type->name || !type->pagesize) { - /* Check is chip is ONFI compliant */ + /* Check if the chip is ONFI compliant */ if (nand_flash_detect_onfi(mtd, chip, &busw)) goto ident_done; @@ -3924,7 +3564,7 @@ ident_done: } chip->badblockbits = 8; - chip->erase_cmd = single_erase_cmd; + chip->erase = single_erase; /* Do not replace user supplied command function! */ if (mtd->writesize > 512 && chip->cmdfunc == nand_command) @@ -3955,9 +3595,9 @@ ident_done: type->name); #endif - pr_info("%dMiB, %s, page size: %d, OOB size: %d\n", + pr_info("%d MiB, %s, erase size: %d KiB, page size: %d, OOB size: %d\n", (int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC", - mtd->writesize, mtd->oobsize); + mtd->erasesize >> 10, mtd->writesize, mtd->oobsize); return type; } @@ -4024,6 +3664,39 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, } EXPORT_SYMBOL(nand_scan_ident); +/* + * Check if the chip configuration meet the datasheet requirements. + + * If our configuration corrects A bits per B bytes and the minimum + * required correction level is X bits per Y bytes, then we must ensure + * both of the following are true: + * + * (1) A / B >= X / Y + * (2) A >= X + * + * Requirement (1) ensures we can correct for the required bitflip density. + * Requirement (2) ensures we can correct even when all bitflips are clumped + * in the same sector. + */ +static bool nand_ecc_strength_good(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + struct nand_ecc_ctrl *ecc = &chip->ecc; + int corr, ds_corr; + + if (ecc->size == 0 || chip->ecc_step_ds == 0) + /* Not enough information */ + return true; + + /* + * We get the number of corrected bits per page to compare + * the correction density. + */ + corr = (mtd->writesize * ecc->strength) / ecc->size; + ds_corr = (mtd->writesize * chip->ecc_strength_ds) / chip->ecc_step_ds; + + return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds; +} /** * nand_scan_tail - [NAND Interface] Scan for the NAND device @@ -4045,18 +3718,7 @@ int nand_scan_tail(struct mtd_info *mtd) !(chip->bbt_options & NAND_BBT_USE_FLASH)); if (!(chip->options & NAND_OWN_BUFFERS)) { -#ifndef __UBOOT__ - nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize - + mtd->oobsize * 3, GFP_KERNEL); - if (!nbuf) - return -ENOMEM; - nbuf->ecccalc = (uint8_t *)(nbuf + 1); - nbuf->ecccode = nbuf->ecccalc + mtd->oobsize; - nbuf->databuf = nbuf->ecccode + mtd->oobsize; -#else nbuf = kzalloc(sizeof(struct nand_buffers), GFP_KERNEL); -#endif - chip->buffers = nbuf; } else { if (!chip->buffers) @@ -4102,8 +3764,7 @@ int nand_scan_tail(struct mtd_info *mtd) case NAND_ECC_HW_OOB_FIRST: /* Similar to NAND_ECC_HW, but a separate read_page handle */ if (!ecc->calculate || !ecc->correct || !ecc->hwctl) { - pr_warn("No ECC functions supplied; " - "hardware ECC not possible\n"); + pr_warn("No ECC functions supplied; hardware ECC not possible\n"); BUG(); } if (!ecc->read_page) @@ -4134,8 +3795,7 @@ int nand_scan_tail(struct mtd_info *mtd) ecc->read_page == nand_read_page_hwecc || !ecc->write_page || ecc->write_page == nand_write_page_hwecc)) { - pr_warn("No ECC functions supplied; " - "hardware ECC not possible\n"); + pr_warn("No ECC functions supplied; hardware ECC not possible\n"); BUG(); } /* Use standard syndrome read/write page function? */ @@ -4159,9 +3819,8 @@ int nand_scan_tail(struct mtd_info *mtd) } break; } - pr_warn("%d byte HW ECC not possible on " - "%d byte page size, fallback to SW ECC\n", - ecc->size, mtd->writesize); + pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n", + ecc->size, mtd->writesize); ecc->mode = NAND_ECC_SOFT; case NAND_ECC_SOFT: @@ -4195,27 +3854,28 @@ int nand_scan_tail(struct mtd_info *mtd) ecc->read_oob = nand_read_oob_std; ecc->write_oob = nand_write_oob_std; /* - * Board driver should supply ecc.size and ecc.bytes values to - * select how many bits are correctable; see nand_bch_init() - * for details. Otherwise, default to 4 bits for large page - * devices. + * Board driver should supply ecc.size and ecc.strength values + * to select how many bits are correctable. Otherwise, default + * to 4 bits for large page devices. */ if (!ecc->size && (mtd->oobsize >= 64)) { ecc->size = 512; - ecc->bytes = 7; + ecc->strength = 4; } + + /* See nand_bch_init() for details. */ + ecc->bytes = DIV_ROUND_UP( + ecc->strength * fls(8 * ecc->size), 8); ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes, &ecc->layout); if (!ecc->priv) { pr_warn("BCH ECC initialization failed!\n"); BUG(); } - ecc->strength = ecc->bytes * 8 / fls(8 * ecc->size); break; case NAND_ECC_NONE: - pr_warn("NAND_ECC_NONE selected by board driver. " - "This is not recommended!\n"); + pr_warn("NAND_ECC_NONE selected by board driver. This is not recommended!\n"); ecc->read_page = nand_read_page_raw; ecc->write_page = nand_write_page_raw; ecc->read_oob = nand_read_oob_std; @@ -4248,6 +3908,11 @@ int nand_scan_tail(struct mtd_info *mtd) ecc->layout->oobavail += ecc->layout->oobfree[i].length; mtd->oobavail = ecc->layout->oobavail; + /* ECC sanity check: warn if it's too weak */ + if (!nand_ecc_strength_good(mtd)) + pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n", + mtd->name); + /* * Set the number of read / write steps for one page depending on ECC * mode. @@ -4283,18 +3948,22 @@ int nand_scan_tail(struct mtd_info *mtd) chip->pagebuf = -1; /* Large page NAND with SOFT_ECC should support subpage reads */ - if ((ecc->mode == NAND_ECC_SOFT) && (chip->page_shift > 9)) - chip->options |= NAND_SUBPAGE_READ; + switch (ecc->mode) { + case NAND_ECC_SOFT: + case NAND_ECC_SOFT_BCH: + if (chip->page_shift > 9) + chip->options |= NAND_SUBPAGE_READ; + break; + + default: + break; + } /* Fill in remaining MTD driver data */ mtd->type = nand_is_slc(chip) ? MTD_NANDFLASH : MTD_MLCNANDFLASH; mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM : MTD_CAP_NANDFLASH; mtd->_erase = nand_erase; -#ifndef __UBOOT__ - mtd->_point = NULL; - mtd->_unpoint = NULL; -#endif mtd->_read = nand_read; mtd->_write = nand_write; mtd->_panic_write = panic_nand_write; @@ -4303,10 +3972,7 @@ int nand_scan_tail(struct mtd_info *mtd) mtd->_sync = nand_sync; mtd->_lock = NULL; mtd->_unlock = NULL; -#ifndef __UBOOT__ - mtd->_suspend = nand_suspend; - mtd->_resume = nand_resume; -#endif + mtd->_block_isreserved = nand_block_isreserved; mtd->_block_isbad = nand_block_isbad; mtd->_block_markbad = nand_block_markbad; mtd->writebufsize = mtd->writesize; @@ -4321,7 +3987,7 @@ int nand_scan_tail(struct mtd_info *mtd) * properly set. */ if (!mtd->bitflip_threshold) - mtd->bitflip_threshold = mtd->ecc_strength; + mtd->bitflip_threshold = DIV_ROUND_UP(mtd->ecc_strength * 3, 4); return 0; } @@ -4366,44 +4032,6 @@ int nand_scan(struct mtd_info *mtd, int maxchips) } EXPORT_SYMBOL(nand_scan); -#ifndef __UBOOT__ -/** - * nand_release - [NAND Interface] Free resources held by the NAND device - * @mtd: MTD device structure - */ -void nand_release(struct mtd_info *mtd) -{ - struct nand_chip *chip = mtd->priv; - - if (chip->ecc.mode == NAND_ECC_SOFT_BCH) - nand_bch_free((struct nand_bch_control *)chip->ecc.priv); - - mtd_device_unregister(mtd); - - /* Free bad block table memory */ - kfree(chip->bbt); - if (!(chip->options & NAND_OWN_BUFFERS)) - kfree(chip->buffers); - - /* Free bad block descriptor memory */ - if (chip->badblock_pattern && chip->badblock_pattern->options - & NAND_BBT_DYNAMICSTRUCT) - kfree(chip->badblock_pattern); -} -EXPORT_SYMBOL_GPL(nand_release); - -static int __init nand_base_init(void) -{ - led_trigger_register_simple("nand-disk", &nand_led_trigger); - return 0; -} - -static void __exit nand_base_exit(void) -{ - led_trigger_unregister_simple(nand_led_trigger); -} -#endif - module_init(nand_base_init); module_exit(nand_base_exit);