X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=drivers%2Fnet%2FKconfig;h=77f683699eca85d8a92c2ac8a456a89960a38eeb;hb=3a926a304b9f7a74dbe67ae7dc4cb6c7a174c6c0;hp=c5736b0c3775e79ee5cafe8e1f083458883622ee;hpb=782323c470d7836ff31d1cd7fa978ef161e9cf66;p=karo-tx-uboot.git

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index c5736b0c37..77f683699e 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1,9 +1,84 @@
+config DM_ETH
+	bool "Enable Driver Model for Ethernet drivers"
+	depends on DM
+	help
+	  Enable driver model for Ethernet.
+
+	  The eth_*() interface will be implemented by the UC_ETH class
+	  This is currently implemented in net/eth.c
+	  Look in include/net.h for details.
+
 menuconfig NETDEVICES
 	bool "Network device support"
 	depends on NET
+	default y if DM_ETH
+	help
+	  You must select Y to enable any network device support
+	  Generally if you have any networking support this is a given
+
+	  If unsure, say Y
 
 if NETDEVICES
 
+config E1000
+	bool "Intel PRO/1000 Gigabit Ethernet support"
+	help
+	  This driver supports Intel(R) PRO/1000 gigabit ethernet family of
+	  adapters.  For more information on how to identify your adapter, go
+	  to the Adapter & Driver ID Guide at:
+
+	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+config E1000_SPI_GENERIC
+	bool "Allow access to the Intel 8257x SPI bus"
+	depends on E1000
+	help
+	  Allow generic access to the SPI bus on the Intel 8257x, for
+	  example with the "sspi" command.
+
+config E1000_SPI
+	bool "Enable SPI bus utility code"
+	depends on E1000
+	help
+	  Utility code for direct access to the SPI bus on Intel 8257x.
+	  This does not do anything useful unless you set at least one
+	  of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
+
+config CMD_E1000
+	bool "Enable the e1000 command"
+	depends on E1000
+	help
+	  This enables the 'e1000' management command for E1000 devices. When
+	  used on devices with SPI support you can reprogram the EEPROM from
+	  U-Boot.
+
+config ETH_SANDBOX
+	depends on DM_ETH && SANDBOX
+	default y
+	bool "Sandbox: Mocked Ethernet driver"
+	help
+	  This driver simply responds with fake ARP replies and ping
+	  replies that are used to verify network stack functionality
+
+	  This driver is particularly useful in the test/dm/eth.c tests
+
+config ETH_SANDBOX_RAW
+	depends on DM_ETH && SANDBOX
+	default y
+	bool "Sandbox: Bridge to Linux Raw Sockets"
+	help
+	  This driver is a bridge from the bottom of the network stack
+	  in U-Boot to the RAW AF_PACKET API in Linux. This allows real
+	  network traffic to be tested from within sandbox. See
+	  board/sandbox/README.sandbox for more details.
+
+config ETH_DESIGNWARE
+	bool "Synopsys Designware Ethernet MAC"
+	help
+	  This MAC is present in SoCs from various vendors. It supports
+	  100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
+	  provide the PHY (physical media interface).
+
 config MII
 	bool
 
@@ -15,19 +90,6 @@ config GET_FEC_MAC_ADDR_FROM_IIM
 	bool "Read FEC MAC address from fuses"
 	depends on FEC_MXC
 
-if FEC_MXC
-
-config FEC_MXC_MULTI
-	bool "Support multiple ethernet interfaces"
-	depends on MX28 || MX6
-
-config FEC_MXC_PHYADDR
-	int "FEC Ethernet PHY address"
-       	default 0
-	depends on !FEC_MXC_MULTI
-
-endif
-
 source "drivers/net/phy/Kconfig"
 
-endif
+endif # NETDEVICES