X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=drivers%2Fnet%2Fe100.c;h=c2ae2a24629b35bffd9d348866229a7a24b4e219;hb=81ebd4988892869260808286641a5400aafcb3d1;hp=27d5d2f02533ea49c87ed10b049b0f0cdaabd911;hpb=7ff3e52cf2947ebd38c84159af68e5a29d228f6c;p=mv-sheeva.git

diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 27d5d2f0253..c2ae2a24629 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1215,7 +1215,7 @@ static void e100_setup_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb
 *  the literal in the instruction before the code is loaded, the
 *  driver can change the algorithm.
 *
-*  INTDELAY - This loads the dead-man timer with its inital value.
+*  INTDELAY - This loads the dead-man timer with its initial value.
 *    When this timer expires the interrupt is asserted, and the
 *    timer is reset each time a new packet is received.  (see
 *    BUNDLEMAX below to set the limit on number of chained packets)
@@ -1930,9 +1930,8 @@ static int e100_rx_alloc_list(struct nic *nic)
 	nic->rx_to_use = nic->rx_to_clean = NULL;
 	nic->ru_running = RU_UNINITIALIZED;
 
-	if(!(nic->rxs = kmalloc(sizeof(struct rx) * count, GFP_ATOMIC)))
+	if(!(nic->rxs = kcalloc(count, sizeof(struct rx), GFP_ATOMIC)))
 		return -ENOMEM;
-	memset(nic->rxs, 0, sizeof(struct rx) * count);
 
 	for(rx = nic->rxs, i = 0; i < count; rx++, i++) {
 		rx->next = (i + 1 < count) ? rx + 1 : nic->rxs;
@@ -2039,7 +2038,6 @@ static int e100_change_mtu(struct net_device *netdev, int new_mtu)
 	return 0;
 }
 
-#ifdef CONFIG_PM
 static int e100_asf(struct nic *nic)
 {
 	/* ASF can be enabled from eeprom */
@@ -2048,7 +2046,6 @@ static int e100_asf(struct nic *nic)
 	   !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) &&
 	   ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE));
 }
-#endif
 
 static int e100_up(struct nic *nic)
 {
@@ -2104,9 +2101,10 @@ static void e100_tx_timeout(struct net_device *netdev)
 	schedule_work(&nic->tx_timeout_task);
 }
 
-static void e100_tx_timeout_task(struct net_device *netdev)
+static void e100_tx_timeout_task(struct work_struct *work)
 {
-	struct nic *nic = netdev_priv(netdev);
+	struct nic *nic = container_of(work, struct nic, tx_timeout_task);
+	struct net_device *netdev = nic->netdev;
 
 	DPRINTK(TX_ERR, DEBUG, "scb.status=0x%02X\n",
 		readb(&nic->csr->scb.status));
@@ -2639,8 +2637,7 @@ static int __devinit e100_probe(struct pci_dev *pdev,
 	nic->blink_timer.function = e100_blink_led;
 	nic->blink_timer.data = (unsigned long)nic;
 
-	INIT_WORK(&nic->tx_timeout_task,
-		(void (*)(void *))e100_tx_timeout_task, netdev);
+	INIT_WORK(&nic->tx_timeout_task, e100_tx_timeout_task);
 
 	if((err = e100_alloc(nic))) {
 		DPRINTK(PROBE, ERR, "Cannot alloc driver memory, aborting.\n");
@@ -2715,34 +2712,35 @@ static void __devexit e100_remove(struct pci_dev *pdev)
 	}
 }
 
+#ifdef CONFIG_PM
 static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct nic *nic = netdev_priv(netdev);
 
+#ifdef CONFIG_E100_NAPI
 	if (netif_running(netdev))
-		e100_down(nic);
-	e100_hw_reset(nic);
-	netif_device_detach(netdev);
+		netif_poll_disable(nic->netdev);
+#endif
+	del_timer_sync(&nic->watchdog);
+	netif_carrier_off(nic->netdev);
 
-#ifdef CONFIG_PM
 	pci_save_state(pdev);
-	if (nic->flags & (wol_magic | e100_asf(nic)))
-#else
-	if (nic->flags & (wol_magic))
-#endif
-		pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
-	else
-		/* disable PME */
-		pci_enable_wake(pdev, 0, 0);
+
+	if ((nic->flags & wol_magic) | e100_asf(nic)) {
+		pci_enable_wake(pdev, PCI_D3hot, 1);
+		pci_enable_wake(pdev, PCI_D3cold, 1);
+	} else {
+		pci_enable_wake(pdev, PCI_D3hot, 0);
+		pci_enable_wake(pdev, PCI_D3cold, 0);
+	}
 
 	pci_disable_device(pdev);
-	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+	pci_set_power_state(pdev, PCI_D3hot);
 
 	return 0;
 }
 
-#ifdef CONFIG_PM
 static int e100_resume(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
@@ -2764,7 +2762,26 @@ static int e100_resume(struct pci_dev *pdev)
 
 static void e100_shutdown(struct pci_dev *pdev)
 {
-	e100_suspend(pdev, PMSG_SUSPEND);
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct nic *nic = netdev_priv(netdev);
+
+#ifdef CONFIG_E100_NAPI
+	if (netif_running(netdev))
+		netif_poll_disable(nic->netdev);
+#endif
+	del_timer_sync(&nic->watchdog);
+	netif_carrier_off(nic->netdev);
+
+	if ((nic->flags & wol_magic) | e100_asf(nic)) {
+		pci_enable_wake(pdev, PCI_D3hot, 1);
+		pci_enable_wake(pdev, PCI_D3cold, 1);
+	} else {
+		pci_enable_wake(pdev, PCI_D3hot, 0);
+		pci_enable_wake(pdev, PCI_D3cold, 0);
+	}
+
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, PCI_D3hot);
 }
 
 /* ------------------ PCI Error Recovery infrastructure  -------------- */
@@ -2848,9 +2865,9 @@ static struct pci_driver e100_driver = {
 	.id_table =     e100_id_table,
 	.probe =        e100_probe,
 	.remove =       __devexit_p(e100_remove),
+#ifdef CONFIG_PM
 	/* Power Management hooks */
 	.suspend =      e100_suspend,
-#ifdef CONFIG_PM
 	.resume =       e100_resume,
 #endif
 	.shutdown =     e100_shutdown,