X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=drivers%2Fnet%2Fvia-velocity.c;h=58e25d090ae0687b7ca05a762447df7c6408f414;hb=ca17584bf2ad1b1e37a5c0e4386728cc5fc9dabc;hp=448772f6cb33cbac31a5d076fd3fa11a95ac5f8e;hpb=babcda74e9d96bb58fd9c6c5112dbdbff169e695;p=mv-sheeva.git

diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 448772f6cb3..58e25d090ae 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -849,6 +849,20 @@ static int velocity_soft_reset(struct velocity_info *vptr)
 	return 0;
 }
 
+static const struct net_device_ops velocity_netdev_ops = {
+	.ndo_open		= velocity_open,
+	.ndo_stop		= velocity_close,
+	.ndo_start_xmit		= velocity_xmit,
+	.ndo_get_stats		= velocity_get_stats,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_multicast_list	= velocity_set_multi,
+	.ndo_change_mtu		= velocity_change_mtu,
+	.ndo_do_ioctl		= velocity_ioctl,
+	.ndo_vlan_rx_add_vid	= velocity_vlan_rx_add_vid,
+	.ndo_vlan_rx_kill_vid	= velocity_vlan_rx_kill_vid,
+	.ndo_vlan_rx_register	= velocity_vlan_rx_register,
+};
+
 /**
  *	velocity_found1		-	set up discovered velocity card
  *	@pdev: PCI device
@@ -958,18 +972,8 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi
 	vptr->phy_id = MII_GET_PHY_ID(vptr->mac_regs);
 
 	dev->irq = pdev->irq;
-	dev->open = velocity_open;
-	dev->hard_start_xmit = velocity_xmit;
-	dev->stop = velocity_close;
-	dev->get_stats = velocity_get_stats;
-	dev->set_multicast_list = velocity_set_multi;
-	dev->do_ioctl = velocity_ioctl;
+	dev->netdev_ops = &velocity_netdev_ops;
 	dev->ethtool_ops = &velocity_ethtool_ops;
-	dev->change_mtu = velocity_change_mtu;
-
-	dev->vlan_rx_add_vid = velocity_vlan_rx_add_vid;
-	dev->vlan_rx_kill_vid = velocity_vlan_rx_kill_vid;
-	dev->vlan_rx_register = velocity_vlan_rx_register;
 
 #ifdef  VELOCITY_ZERO_COPY_SUPPORT
 	dev->features |= NETIF_F_SG;
@@ -2294,7 +2298,7 @@ static void velocity_set_multi(struct net_device *dev)
 		}
 
 		mac_set_cam_mask(regs, vptr->mCAMmask);
-		rx_mode = (RCR_AM | RCR_AB);
+		rx_mode = RCR_AM | RCR_AB | RCR_AP;
 	}
 	if (dev->mtu > 1500)
 		rx_mode |= RCR_AL;