X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=drivers%2Fnet%2Fwireless%2Fiwlwifi%2Fiwl-scan.c;h=5b420b43af5cb8b067ed5354eec768e002b65b00;hb=1b63ba8a86c85524a8d7e5953b314ce71ebcb9c9;hp=5ca181f7125dd81d55c16767ba766c59b4d0ab96;hpb=e35c3269edba151e1c703d87068a28ce2cd65bb0;p=linux-beck.git

diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 5ca181f7125d..5b420b43af5c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -276,13 +276,18 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
 	cancel_delayed_work(&priv->scan_check);
 
 	IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
-		       (priv->scan_bands == 2) ? "2.4" : "5.2",
+		       (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
+						"2.4" : "5.2",
 		       jiffies_to_msecs(elapsed_jiffies
 					(priv->scan_pass_start, jiffies)));
 
-	/* Remove this scanned band from the list
-	 * of pending bands to scan */
-	priv->scan_bands--;
+	/* Remove this scanned band from the list of pending
+	 * bands to scan, band G precedes A in order of scanning
+	 * as seen in iwl_bg_request_scan */
+	if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ))
+		priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ);
+	else if (priv->scan_bands &  BIT(IEEE80211_BAND_5GHZ))
+		priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ);
 
 	/* If a request to abort was given, or the scan did not succeed
 	 * then we reset the scan state machine and terminate,
@@ -292,7 +297,7 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
 		clear_bit(STATUS_SCAN_ABORTING, &priv->status);
 	} else {
 		/* If there are more bands on this scan pass reschedule */
-		if (priv->scan_bands > 0)
+		if (priv->scan_bands)
 			goto reschedule;
 	}
 
@@ -389,7 +394,7 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv,
 
 		ch_info = iwl_get_channel_info(priv, band, scan_ch->channel);
 		if (!is_channel_valid(ch_info)) {
-			IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
+			IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n",
 				       scan_ch->channel);
 			continue;
 		}
@@ -465,7 +470,10 @@ int iwl_scan_initiate(struct iwl_priv *priv)
 	}
 
 	IWL_DEBUG_INFO("Starting scan...\n");
-	priv->scan_bands = 2;
+	if (priv->cfg->sku & IWL_SKU_G)
+		priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ);
+	if (priv->cfg->sku & IWL_SKU_A)
+		priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ);
 	set_bit(STATUS_SCANNING, &priv->status);
 	priv->scan_start = jiffies;
 	priv->scan_pass_start = priv->scan_start;
@@ -803,8 +811,7 @@ static void iwl_bg_request_scan(struct work_struct *data)
 	scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
 
 
-	switch (priv->scan_bands) {
-	case 2:
+	if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) {
 		band = IEEE80211_BAND_2GHZ;
 		scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
 		tx_ant = iwl_scan_tx_ant(priv, band);
@@ -818,9 +825,7 @@ static void iwl_bg_request_scan(struct work_struct *data)
 							tx_ant |
 							RATE_MCS_CCK_MSK);
 		scan->good_CRC_th = 0;
-		break;
-
-	case 1:
+	} else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
 		band = IEEE80211_BAND_5GHZ;
 		tx_ant = iwl_scan_tx_ant(priv, band);
 		scan->tx_cmd.rate_n_flags =
@@ -833,9 +838,7 @@ static void iwl_bg_request_scan(struct work_struct *data)
 		 * MIMO is not used here, but value is required */
 		if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)
 			rx_chain = 0x6;
-
-		break;
-	default:
+	} else {
 		IWL_WARNING("Invalid scan band count\n");
 		goto done;
 	}