X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=drivers%2Fqe%2Fuec_phy.h;h=f924b2a14dd1fb956d611bf8274d045f061d98b2;hb=c4330d283cefbd3574366e82910da3e918324b86;hp=e59a940e0dd4fdc2deb6178139a7f363e513d1ed;hpb=b8685affe614ccf5f4ec66252b30e2e524d18948;p=karo-tx-uboot.git

diff --git a/drivers/qe/uec_phy.h b/drivers/qe/uec_phy.h
index e59a940e0d..f924b2a14d 100644
--- a/drivers/qe/uec_phy.h
+++ b/drivers/qe/uec_phy.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 Freescale Semiconductor, Inc.
+ * Copyright (C) 2005, 2011 Freescale Semiconductor, Inc.
  *
  * Author: Shlomi Gridish <gridish@freescale.com>
  *
@@ -24,11 +24,6 @@
 
 #define UGETH_AN_TIMEOUT	2000
 
-/* 1000BT control (Marvell & BCM54xx at least) */
-#define MII_1000BASETCONTROL		      0x09
-#define MII_1000BASETCONTROL_FULLDUPLEXCAP    0x0200
-#define MII_1000BASETCONTROL_HALFDUPLEXCAP    0x0100
-
 /* Cicada Extended Control Register 1 */
 #define MII_CIS8201_EXT_CON1	    0x17
 #define MII_CIS8201_EXTCON1_INIT    0x0000
@@ -72,6 +67,14 @@
 #define MII_M1011_IMASK_INIT		0x6400
 #define MII_M1011_IMASK_CLEAR		0x0000
 
+/* 88E1111 PHY Register */
+#define MII_M1111_PHY_EXT_CR            0x14
+#define MII_M1111_RX_DELAY              0x80
+#define MII_M1111_TX_DELAY              0x2
+#define MII_M1111_PHY_EXT_SR            0x1b
+#define MII_M1111_HWCFG_MODE_MASK       0xf
+#define MII_M1111_HWCFG_MODE_RGMII      0xb
+
 #define MII_DM9161_SCR			0x10
 #define MII_DM9161_SCR_INIT		0x0610
 #define MII_DM9161_SCR_RMII_INIT	0x0710
@@ -156,24 +159,6 @@
 #define ADVERTISED_BNC			(1 << 11)
 #define ADVERTISED_10000baseT_Full	(1 << 12)
 
-/* Advertisement control register. */
-#define ADVERTISE_SLCT		0x001f	/* Selector bits	       */
-#define ADVERTISE_CSMA		0x0001	/* Only selector supported     */
-#define ADVERTISE_10HALF	0x0020	/* Try for 10mbps half-duplex  */
-#define ADVERTISE_10FULL	0x0040	/* Try for 10mbps full-duplex  */
-#define ADVERTISE_100HALF	0x0080	/* Try for 100mbps half-duplex */
-#define ADVERTISE_100FULL	0x0100	/* Try for 100mbps full-duplex */
-#define ADVERTISE_100BASE4	0x0200	/* Try for 100mbps 4k packets  */
-#define ADVERTISE_RESV		0x1c00	/* Unused...		       */
-#define ADVERTISE_RFAULT	0x2000	/* Say we can detect faults    */
-#define ADVERTISE_LPACK		0x4000	/* Ack link partners response  */
-#define ADVERTISE_NPAGE		0x8000	/* Next page bit	       */
-
-#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
-			ADVERTISE_CSMA)
-#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
-		       ADVERTISE_100HALF | ADVERTISE_100FULL)
-
 /* Taken from mii_if_info and sungem_phy.h */
 struct uec_mii_info {
 	/* Information about the PHY type */