X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=drivers%2Fstaging%2Fbcm%2FDDRInit.c;h=ed285b2d892daaea011e7b4f5c68ea4933ff69ea;hb=154a0e58deb9f9767cef52a5d8ba9dea0ca47d19;hp=9f7e30f637eaff41d0f0128fd315cd5f5ce3960f;hpb=825e587af2e90e9b953849f3347a01d8f383d577;p=karo-tx-linux.git diff --git a/drivers/staging/bcm/DDRInit.c b/drivers/staging/bcm/DDRInit.c index 9f7e30f637ea..ed285b2d892d 100644 --- a/drivers/staging/bcm/DDRInit.c +++ b/drivers/staging/bcm/DDRInit.c @@ -5,882 +5,865 @@ #define DDR_DUMP_INTERNAL_DEVICE_MEMORY 0xBFC02B00 #define MIPS_CLOCK_REG 0x0f000820 - //DDR INIT-133Mhz -#define T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 12 //index for 0x0F007000 -static struct bcm_ddr_setting asT3_DDRSetting133MHz[]= {// # DPLL Clock Setting - {0x0F000800,0x00007212}, - {0x0f000820,0x07F13FFF}, - {0x0f000810,0x00000F95}, - {0x0f000860,0x00000000}, - {0x0f000880,0x000003DD}, - // Changed source for X-bar and MIPS clock to APLL - {0x0f000840,0x0FFF1B00}, - {0x0f000870,0x00000002}, - {0x0F00a044,0x1fffffff}, - {0x0F00a040,0x1f000000}, - {0x0F00a084,0x1Cffffff}, - {0x0F00a080,0x1C000000}, - {0x0F00a04C,0x0000000C}, - //Memcontroller Default values - {0x0F007000,0x00010001}, - {0x0F007004,0x01010100}, - {0x0F007008,0x01000001}, - {0x0F00700c,0x00000000}, - {0x0F007010,0x01000000}, - {0x0F007014,0x01000100}, - {0x0F007018,0x01000000}, - {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001 - {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107 - {0x0F007024,0x02000007}, - {0x0F007028,0x02020202}, - {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a - {0x0F007030,0x05000000}, - {0x0F007034,0x00000003}, - {0x0F007038,0x110a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200 - {0x0F00703C,0x02101010},//ROB - 0x02101010,//0x02101018}, - {0x0F007040,0x45751200},//ROB - 0x45751200,//0x450f1200}, - {0x0F007044,0x110a0d00},//ROB - 0x110a0d00//0x111f0d00 - {0x0F007048,0x081b0306}, - {0x0F00704c,0x00000000}, - {0x0F007050,0x0000001c}, - {0x0F007054,0x00000000}, - {0x0F007058,0x00000000}, - {0x0F00705c,0x00000000}, - {0x0F007060,0x0010246c}, - {0x0F007064,0x00000010}, - {0x0F007068,0x00000000}, - {0x0F00706c,0x00000001}, - {0x0F007070,0x00007000}, - {0x0F007074,0x00000000}, - {0x0F007078,0x00000000}, - {0x0F00707C,0x00000000}, - {0x0F007080,0x00000000}, - {0x0F007084,0x00000000}, - //# Enable BW improvement within memory controller - {0x0F007094,0x00000104}, - //# Enable 2 ports within X-bar - {0x0F00A000,0x00000016}, - //# Enable start bit within memory controller - {0x0F007018,0x01010000} - }; -//80Mhz -#define T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 10 //index for 0x0F007000 -static struct bcm_ddr_setting asT3_DDRSetting80MHz[]= {// # DPLL Clock Setting - {0x0f000810,0x00000F95}, - {0x0f000820,0x07f1ffff}, - {0x0f000860,0x00000000}, - {0x0f000880,0x000003DD}, - {0x0F00a044,0x1fffffff}, - {0x0F00a040,0x1f000000}, - {0x0F00a084,0x1Cffffff}, - {0x0F00a080,0x1C000000}, - {0x0F00a000,0x00000016}, - {0x0F00a04C,0x0000000C}, - //Memcontroller Default values - {0x0F007000,0x00010001}, - {0x0F007004,0x01000000}, - {0x0F007008,0x01000001}, - {0x0F00700c,0x00000000}, - {0x0F007010,0x01000000}, - {0x0F007014,0x01000100}, - {0x0F007018,0x01000000}, - {0x0F00701c,0x01020000}, - {0x0F007020,0x04020107}, - {0x0F007024,0x00000007}, - {0x0F007028,0x02020201}, - {0x0F00702c,0x0204040a}, - {0x0F007030,0x04000000}, - {0x0F007034,0x00000002}, - {0x0F007038,0x1F060200}, - {0x0F00703C,0x1C22221F}, - {0x0F007040,0x8A006600}, - {0x0F007044,0x221a0800}, - {0x0F007048,0x02690204}, - {0x0F00704c,0x00000000}, - {0x0F007050,0x0000001c}, - {0x0F007054,0x00000000}, - {0x0F007058,0x00000000}, - {0x0F00705c,0x00000000}, - {0x0F007060,0x000A15D6}, - {0x0F007064,0x0000000A}, - {0x0F007068,0x00000000}, - {0x0F00706c,0x00000001}, - {0x0F007070,0x00004000}, - {0x0F007074,0x00000000}, - {0x0F007078,0x00000000}, - {0x0F00707C,0x00000000}, - {0x0F007080,0x00000000}, - {0x0F007084,0x00000000}, - {0x0F007094,0x00000104}, - //# Enable start bit within memory controller - {0x0F007018,0x01010000} - }; -//100Mhz -#define T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 13 //index for 0x0F007000 -static struct bcm_ddr_setting asT3_DDRSetting100MHz[]= {// # DPLL Clock Setting - {0x0F000800,0x00007008}, - {0x0f000810,0x00000F95}, - {0x0f000820,0x07F13E3F}, - {0x0f000860,0x00000000}, - {0x0f000880,0x000003DD}, - // Changed source for X-bar and MIPS clock to APLL - //0x0f000840,0x0FFF1800, - {0x0f000840,0x0FFF1B00}, - {0x0f000870,0x00000002}, - {0x0F00a044,0x1fffffff}, - {0x0F00a040,0x1f000000}, - {0x0F00a084,0x1Cffffff}, - {0x0F00a080,0x1C000000}, - {0x0F00a04C,0x0000000C}, - //# Enable 2 ports within X-bar - {0x0F00A000,0x00000016}, - //Memcontroller Default values - {0x0F007000,0x00010001}, - {0x0F007004,0x01010100}, - {0x0F007008,0x01000001}, - {0x0F00700c,0x00000000}, - {0x0F007010,0x01000000}, - {0x0F007014,0x01000100}, - {0x0F007018,0x01000000}, - {0x0F00701c,0x01020001}, // POP - 0x00020000 Normal 0x01020000 - {0x0F007020,0x04020107},//Normal - 0x04030107 POP - 0x05030107 - {0x0F007024,0x00000007}, - {0x0F007028,0x01020201}, - {0x0F00702c,0x0204040A}, - {0x0F007030,0x06000000}, - {0x0F007034,0x00000004}, - {0x0F007038,0x20080200}, - {0x0F00703C,0x02030320}, - {0x0F007040,0x6E7F1200}, - {0x0F007044,0x01190A00}, - {0x0F007048,0x06120305},//0x02690204 // 0x06120305 - {0x0F00704c,0x00000000}, - {0x0F007050,0x0000001C}, - {0x0F007054,0x00000000}, - {0x0F007058,0x00000000}, - {0x0F00705c,0x00000000}, - {0x0F007060,0x00082ED6}, - {0x0F007064,0x0000000A}, - {0x0F007068,0x00000000}, - {0x0F00706c,0x00000001}, - {0x0F007070,0x00005000}, - {0x0F007074,0x00000000}, - {0x0F007078,0x00000000}, - {0x0F00707C,0x00000000}, - {0x0F007080,0x00000000}, - {0x0F007084,0x00000000}, - //# Enable BW improvement within memory controller - {0x0F007094,0x00000104}, - //# Enable start bit within memory controller - {0x0F007018,0x01010000} - }; +/* DDR INIT-133Mhz */ +#define T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 12 /* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3_DDRSetting133MHz[] = { /* DPLL Clock Setting */ + {0x0F000800, 0x00007212}, + {0x0f000820, 0x07F13FFF}, + {0x0f000810, 0x00000F95}, + {0x0f000860, 0x00000000}, + {0x0f000880, 0x000003DD}, + /* Changed source for X-bar and MIPS clock to APLL */ + {0x0f000840, 0x0FFF1B00}, + {0x0f000870, 0x00000002}, + {0x0F00a044, 0x1fffffff}, + {0x0F00a040, 0x1f000000}, + {0x0F00a084, 0x1Cffffff}, + {0x0F00a080, 0x1C000000}, + {0x0F00a04C, 0x0000000C}, + /* Memcontroller Default values */ + {0x0F007000, 0x00010001}, + {0x0F007004, 0x01010100}, + {0x0F007008, 0x01000001}, + {0x0F00700c, 0x00000000}, + {0x0F007010, 0x01000000}, + {0x0F007014, 0x01000100}, + {0x0F007018, 0x01000000}, + {0x0F00701c, 0x01020001}, + {0x0F007020, 0x04030107}, + {0x0F007024, 0x02000007}, + {0x0F007028, 0x02020202}, + {0x0F00702c, 0x0206060a}, + {0x0F007030, 0x05000000}, + {0x0F007034, 0x00000003}, + {0x0F007038, 0x110a0200}, + {0x0F00703C, 0x02101010}, + {0x0F007040, 0x45751200}, + {0x0F007044, 0x110a0d00}, + {0x0F007048, 0x081b0306}, + {0x0F00704c, 0x00000000}, + {0x0F007050, 0x0000001c}, + {0x0F007054, 0x00000000}, + {0x0F007058, 0x00000000}, + {0x0F00705c, 0x00000000}, + {0x0F007060, 0x0010246c}, + {0x0F007064, 0x00000010}, + {0x0F007068, 0x00000000}, + {0x0F00706c, 0x00000001}, + {0x0F007070, 0x00007000}, + {0x0F007074, 0x00000000}, + {0x0F007078, 0x00000000}, + {0x0F00707C, 0x00000000}, + {0x0F007080, 0x00000000}, + {0x0F007084, 0x00000000}, + /* Enable BW improvement within memory controller */ + {0x0F007094, 0x00000104}, + /* Enable 2 ports within X-bar */ + {0x0F00A000, 0x00000016}, + /* Enable start bit within memory controller */ + {0x0F007018, 0x01010000} +}; +/* 80Mhz */ +#define T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 10 /* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3_DDRSetting80MHz[] = { /* DPLL Clock Setting */ + {0x0f000810, 0x00000F95}, + {0x0f000820, 0x07f1ffff}, + {0x0f000860, 0x00000000}, + {0x0f000880, 0x000003DD}, + {0x0F00a044, 0x1fffffff}, + {0x0F00a040, 0x1f000000}, + {0x0F00a084, 0x1Cffffff}, + {0x0F00a080, 0x1C000000}, + {0x0F00a000, 0x00000016}, + {0x0F00a04C, 0x0000000C}, + /* Memcontroller Default values */ + {0x0F007000, 0x00010001}, + {0x0F007004, 0x01000000}, + {0x0F007008, 0x01000001}, + {0x0F00700c, 0x00000000}, + {0x0F007010, 0x01000000}, + {0x0F007014, 0x01000100}, + {0x0F007018, 0x01000000}, + {0x0F00701c, 0x01020000}, + {0x0F007020, 0x04020107}, + {0x0F007024, 0x00000007}, + {0x0F007028, 0x02020201}, + {0x0F00702c, 0x0204040a}, + {0x0F007030, 0x04000000}, + {0x0F007034, 0x00000002}, + {0x0F007038, 0x1F060200}, + {0x0F00703C, 0x1C22221F}, + {0x0F007040, 0x8A006600}, + {0x0F007044, 0x221a0800}, + {0x0F007048, 0x02690204}, + {0x0F00704c, 0x00000000}, + {0x0F007050, 0x0000001c}, + {0x0F007054, 0x00000000}, + {0x0F007058, 0x00000000}, + {0x0F00705c, 0x00000000}, + {0x0F007060, 0x000A15D6}, + {0x0F007064, 0x0000000A}, + {0x0F007068, 0x00000000}, + {0x0F00706c, 0x00000001}, + {0x0F007070, 0x00004000}, + {0x0F007074, 0x00000000}, + {0x0F007078, 0x00000000}, + {0x0F00707C, 0x00000000}, + {0x0F007080, 0x00000000}, + {0x0F007084, 0x00000000}, + {0x0F007094, 0x00000104}, + /* Enable start bit within memory controller */ + {0x0F007018, 0x01010000} +}; +/* 100Mhz */ +#define T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 13 /* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3_DDRSetting100MHz[] = { /* DPLL Clock Setting */ + {0x0F000800, 0x00007008}, + {0x0f000810, 0x00000F95}, + {0x0f000820, 0x07F13E3F}, + {0x0f000860, 0x00000000}, + {0x0f000880, 0x000003DD}, + /* Changed source for X-bar and MIPS clock to APLL */ + {0x0f000840, 0x0FFF1B00}, + {0x0f000870, 0x00000002}, + {0x0F00a044, 0x1fffffff}, + {0x0F00a040, 0x1f000000}, + {0x0F00a084, 0x1Cffffff}, + {0x0F00a080, 0x1C000000}, + {0x0F00a04C, 0x0000000C}, + /* Enable 2 ports within X-bar */ + {0x0F00A000, 0x00000016}, + /* Memcontroller Default values */ + {0x0F007000, 0x00010001}, + {0x0F007004, 0x01010100}, + {0x0F007008, 0x01000001}, + {0x0F00700c, 0x00000000}, + {0x0F007010, 0x01000000}, + {0x0F007014, 0x01000100}, + {0x0F007018, 0x01000000}, + {0x0F00701c, 0x01020001}, + {0x0F007020, 0x04020107}, + {0x0F007024, 0x00000007}, + {0x0F007028, 0x01020201}, + {0x0F00702c, 0x0204040A}, + {0x0F007030, 0x06000000}, + {0x0F007034, 0x00000004}, + {0x0F007038, 0x20080200}, + {0x0F00703C, 0x02030320}, + {0x0F007040, 0x6E7F1200}, + {0x0F007044, 0x01190A00}, + {0x0F007048, 0x06120305}, + {0x0F00704c, 0x00000000}, + {0x0F007050, 0x0000001C}, + {0x0F007054, 0x00000000}, + {0x0F007058, 0x00000000}, + {0x0F00705c, 0x00000000}, + {0x0F007060, 0x00082ED6}, + {0x0F007064, 0x0000000A}, + {0x0F007068, 0x00000000}, + {0x0F00706c, 0x00000001}, + {0x0F007070, 0x00005000}, + {0x0F007074, 0x00000000}, + {0x0F007078, 0x00000000}, + {0x0F00707C, 0x00000000}, + {0x0F007080, 0x00000000}, + {0x0F007084, 0x00000000}, + /* Enable BW improvement within memory controller */ + {0x0F007094, 0x00000104}, + /* Enable start bit within memory controller */ + {0x0F007018, 0x01010000} +}; -//Net T3B DDR Settings -//DDR INIT-133Mhz +/* Net T3B DDR Settings + * DDR INIT-133Mhz + */ static struct bcm_ddr_setting asDPLL_266MHZ[] = { - {0x0F000800,0x00007212}, - {0x0f000820,0x07F13FFF}, - {0x0f000810,0x00000F95}, - {0x0f000860,0x00000000}, - {0x0f000880,0x000003DD}, - // Changed source for X-bar and MIPS clock to APLL - {0x0f000840,0x0FFF1B00}, - {0x0f000870,0x00000002} - }; + {0x0F000800, 0x00007212}, + {0x0f000820, 0x07F13FFF}, + {0x0f000810, 0x00000F95}, + {0x0f000860, 0x00000000}, + {0x0f000880, 0x000003DD}, + /* Changed source for X-bar and MIPS clock to APLL */ + {0x0f000840, 0x0FFF1B00}, + {0x0f000870, 0x00000002} +}; -#define T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 11 //index for 0x0F007000 -static struct bcm_ddr_setting asT3B_DDRSetting133MHz[] = {// # DPLL Clock Setting - {0x0f000810,0x00000F95}, - {0x0f000810,0x00000F95}, - {0x0f000810,0x00000F95}, - {0x0f000820,0x07F13652}, - {0x0f000840,0x0FFF0800}, - // Changed source for X-bar and MIPS clock to APLL - {0x0f000880,0x000003DD}, - {0x0f000860,0x00000000}, - // Changed source for X-bar and MIPS clock to APLL - {0x0F00a044,0x1fffffff}, - {0x0F00a040,0x1f000000}, - {0x0F00a084,0x1Cffffff}, - {0x0F00a080,0x1C000000}, - //# Enable 2 ports within X-bar - {0x0F00A000,0x00000016}, - //Memcontroller Default values - {0x0F007000,0x00010001}, - {0x0F007004,0x01010100}, - {0x0F007008,0x01000001}, - {0x0F00700c,0x00000000}, - {0x0F007010,0x01000000}, - {0x0F007014,0x01000100}, - {0x0F007018,0x01000000}, - {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001 - {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107 - {0x0F007024,0x02000007}, - {0x0F007028,0x02020202}, - {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a - {0x0F007030,0x05000000}, - {0x0F007034,0x00000003}, - {0x0F007038,0x130a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200 - {0x0F00703C,0x02101012},//ROB - 0x02101010,//0x02101018}, - {0x0F007040,0x457D1200},//ROB - 0x45751200,//0x450f1200}, - {0x0F007044,0x11130d00},//ROB - 0x110a0d00//0x111f0d00 - {0x0F007048,0x040D0306}, - {0x0F00704c,0x00000000}, - {0x0F007050,0x0000001c}, - {0x0F007054,0x00000000}, - {0x0F007058,0x00000000}, - {0x0F00705c,0x00000000}, - {0x0F007060,0x0010246c}, - {0x0F007064,0x00000012}, - {0x0F007068,0x00000000}, - {0x0F00706c,0x00000001}, - {0x0F007070,0x00007000}, - {0x0F007074,0x00000000}, - {0x0F007078,0x00000000}, - {0x0F00707C,0x00000000}, - {0x0F007080,0x00000000}, - {0x0F007084,0x00000000}, - //# Enable BW improvement within memory controller - {0x0F007094,0x00000104}, - //# Enable start bit within memory controller - {0x0F007018,0x01010000}, - }; +#define T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 11 /* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3B_DDRSetting133MHz[] = { /* DPLL Clock Setting */ + {0x0f000810, 0x00000F95}, + {0x0f000810, 0x00000F95}, + {0x0f000810, 0x00000F95}, + {0x0f000820, 0x07F13652}, + {0x0f000840, 0x0FFF0800}, + /* Changed source for X-bar and MIPS clock to APLL */ + {0x0f000880, 0x000003DD}, + {0x0f000860, 0x00000000}, + /* Changed source for X-bar and MIPS clock to APLL */ + {0x0F00a044, 0x1fffffff}, + {0x0F00a040, 0x1f000000}, + {0x0F00a084, 0x1Cffffff}, + {0x0F00a080, 0x1C000000}, + /* Enable 2 ports within X-bar */ + {0x0F00A000, 0x00000016}, + /* Memcontroller Default values */ + {0x0F007000, 0x00010001}, + {0x0F007004, 0x01010100}, + {0x0F007008, 0x01000001}, + {0x0F00700c, 0x00000000}, + {0x0F007010, 0x01000000}, + {0x0F007014, 0x01000100}, + {0x0F007018, 0x01000000}, + {0x0F00701c, 0x01020001}, + {0x0F007020, 0x04030107}, + {0x0F007024, 0x02000007}, + {0x0F007028, 0x02020202}, + {0x0F00702c, 0x0206060a}, + {0x0F007030, 0x05000000}, + {0x0F007034, 0x00000003}, + {0x0F007038, 0x130a0200}, + {0x0F00703C, 0x02101012}, + {0x0F007040, 0x457D1200}, + {0x0F007044, 0x11130d00}, + {0x0F007048, 0x040D0306}, + {0x0F00704c, 0x00000000}, + {0x0F007050, 0x0000001c}, + {0x0F007054, 0x00000000}, + {0x0F007058, 0x00000000}, + {0x0F00705c, 0x00000000}, + {0x0F007060, 0x0010246c}, + {0x0F007064, 0x00000012}, + {0x0F007068, 0x00000000}, + {0x0F00706c, 0x00000001}, + {0x0F007070, 0x00007000}, + {0x0F007074, 0x00000000}, + {0x0F007078, 0x00000000}, + {0x0F00707C, 0x00000000}, + {0x0F007080, 0x00000000}, + {0x0F007084, 0x00000000}, + /* Enable BW improvement within memory controller */ + {0x0F007094, 0x00000104}, + /* Enable start bit within memory controller */ + {0x0F007018, 0x01010000}, + }; -#define T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 //index for 0x0F007000 -static struct bcm_ddr_setting asT3B_DDRSetting80MHz[] = {// # DPLL Clock Setting - {0x0f000810,0x00000F95}, - {0x0f000820,0x07F13FFF}, - {0x0f000840,0x0FFF1F00}, - {0x0f000880,0x000003DD}, - {0x0f000860,0x00000000}, +#define T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 /* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3B_DDRSetting80MHz[] = { /* DPLL Clock Setting */ + {0x0f000810, 0x00000F95}, + {0x0f000820, 0x07F13FFF}, + {0x0f000840, 0x0FFF1F00}, + {0x0f000880, 0x000003DD}, + {0x0f000860, 0x00000000}, - {0x0F00a044,0x1fffffff}, - {0x0F00a040,0x1f000000}, - {0x0F00a084,0x1Cffffff}, - {0x0F00a080,0x1C000000}, - {0x0F00a000,0x00000016}, - //Memcontroller Default values - {0x0F007000,0x00010001}, - {0x0F007004,0x01000000}, - {0x0F007008,0x01000001}, - {0x0F00700c,0x00000000}, - {0x0F007010,0x01000000}, - {0x0F007014,0x01000100}, - {0x0F007018,0x01000000}, - {0x0F00701c,0x01020000}, - {0x0F007020,0x04020107}, - {0x0F007024,0x00000007}, - {0x0F007028,0x02020201}, - {0x0F00702c,0x0204040a}, - {0x0F007030,0x04000000}, - {0x0F007034,0x02000002}, - {0x0F007038,0x1F060202}, - {0x0F00703C,0x1C22221F}, - {0x0F007040,0x8A006600}, - {0x0F007044,0x221a0800}, - {0x0F007048,0x02690204}, - {0x0F00704c,0x00000000}, - {0x0F007050,0x0100001c}, - {0x0F007054,0x00000000}, - {0x0F007058,0x00000000}, - {0x0F00705c,0x00000000}, - {0x0F007060,0x000A15D6}, - {0x0F007064,0x0000000A}, - {0x0F007068,0x00000000}, - {0x0F00706c,0x00000001}, - {0x0F007070,0x00004000}, - {0x0F007074,0x00000000}, - {0x0F007078,0x00000000}, - {0x0F00707C,0x00000000}, - {0x0F007080,0x00000000}, - {0x0F007084,0x00000000}, - {0x0F007094,0x00000104}, - //# Enable start bit within memory controller - {0x0F007018,0x01010000} - }; + {0x0F00a044, 0x1fffffff}, + {0x0F00a040, 0x1f000000}, + {0x0F00a084, 0x1Cffffff}, + {0x0F00a080, 0x1C000000}, + {0x0F00a000, 0x00000016}, + /* Memcontroller Default values */ + {0x0F007000, 0x00010001}, + {0x0F007004, 0x01000000}, + {0x0F007008, 0x01000001}, + {0x0F00700c, 0x00000000}, + {0x0F007010, 0x01000000}, + {0x0F007014, 0x01000100}, + {0x0F007018, 0x01000000}, + {0x0F00701c, 0x01020000}, + {0x0F007020, 0x04020107}, + {0x0F007024, 0x00000007}, + {0x0F007028, 0x02020201}, + {0x0F00702c, 0x0204040a}, + {0x0F007030, 0x04000000}, + {0x0F007034, 0x02000002}, + {0x0F007038, 0x1F060202}, + {0x0F00703C, 0x1C22221F}, + {0x0F007040, 0x8A006600}, + {0x0F007044, 0x221a0800}, + {0x0F007048, 0x02690204}, + {0x0F00704c, 0x00000000}, + {0x0F007050, 0x0100001c}, + {0x0F007054, 0x00000000}, + {0x0F007058, 0x00000000}, + {0x0F00705c, 0x00000000}, + {0x0F007060, 0x000A15D6}, + {0x0F007064, 0x0000000A}, + {0x0F007068, 0x00000000}, + {0x0F00706c, 0x00000001}, + {0x0F007070, 0x00004000}, + {0x0F007074, 0x00000000}, + {0x0F007078, 0x00000000}, + {0x0F00707C, 0x00000000}, + {0x0F007080, 0x00000000}, + {0x0F007084, 0x00000000}, + {0x0F007094, 0x00000104}, + /* Enable start bit within memory controller */ + {0x0F007018, 0x01010000} +}; -//100Mhz -#define T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 9 //index for 0x0F007000 -static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = {// # DPLL Clock Setting - {0x0f000810,0x00000F95}, - {0x0f000820,0x07F1369B}, - {0x0f000840,0x0FFF0800}, - {0x0f000880,0x000003DD}, - {0x0f000860,0x00000000}, - {0x0F00a044,0x1fffffff}, - {0x0F00a040,0x1f000000}, - {0x0F00a084,0x1Cffffff}, - {0x0F00a080,0x1C000000}, - //# Enable 2 ports within X-bar - {0x0F00A000,0x00000016}, - //Memcontroller Default values - {0x0F007000,0x00010001}, - {0x0F007004,0x01010100}, - {0x0F007008,0x01000001}, - {0x0F00700c,0x00000000}, - {0x0F007010,0x01000000}, - {0x0F007014,0x01000100}, - {0x0F007018,0x01000000}, - {0x0F00701c,0x01020000}, // POP - 0x00020000 Normal 0x01020000 - {0x0F007020,0x04020107},//Normal - 0x04030107 POP - 0x05030107 - {0x0F007024,0x00000007}, - {0x0F007028,0x01020201}, - {0x0F00702c,0x0204040A}, - {0x0F007030,0x06000000}, - {0x0F007034,0x02000004}, - {0x0F007038,0x20080200}, - {0x0F00703C,0x02030320}, - {0x0F007040,0x6E7F1200}, - {0x0F007044,0x01190A00}, - {0x0F007048,0x06120305},//0x02690204 // 0x06120305 - {0x0F00704c,0x00000000}, - {0x0F007050,0x0100001C}, - {0x0F007054,0x00000000}, - {0x0F007058,0x00000000}, - {0x0F00705c,0x00000000}, - {0x0F007060,0x00082ED6}, - {0x0F007064,0x0000000A}, - {0x0F007068,0x00000000}, - {0x0F00706c,0x00000001}, - {0x0F007070,0x00005000}, - {0x0F007074,0x00000000}, - {0x0F007078,0x00000000}, - {0x0F00707C,0x00000000}, - {0x0F007080,0x00000000}, - {0x0F007084,0x00000000}, - //# Enable BW improvement within memory controller - {0x0F007094,0x00000104}, - //# Enable start bit within memory controller - {0x0F007018,0x01010000} - }; +/* 100Mhz */ +#define T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 9 /* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = { /* DPLL Clock Setting */ + {0x0f000810, 0x00000F95}, + {0x0f000820, 0x07F1369B}, + {0x0f000840, 0x0FFF0800}, + {0x0f000880, 0x000003DD}, + {0x0f000860, 0x00000000}, + {0x0F00a044, 0x1fffffff}, + {0x0F00a040, 0x1f000000}, + {0x0F00a084, 0x1Cffffff}, + {0x0F00a080, 0x1C000000}, + /* Enable 2 ports within X-bar */ + {0x0F00A000, 0x00000016}, + /* Memcontroller Default values */ + {0x0F007000, 0x00010001}, + {0x0F007004, 0x01010100}, + {0x0F007008, 0x01000001}, + {0x0F00700c, 0x00000000}, + {0x0F007010, 0x01000000}, + {0x0F007014, 0x01000100}, + {0x0F007018, 0x01000000}, + {0x0F00701c, 0x01020000}, + {0x0F007020, 0x04020107}, + {0x0F007024, 0x00000007}, + {0x0F007028, 0x01020201}, + {0x0F00702c, 0x0204040A}, + {0x0F007030, 0x06000000}, + {0x0F007034, 0x02000004}, + {0x0F007038, 0x20080200}, + {0x0F00703C, 0x02030320}, + {0x0F007040, 0x6E7F1200}, + {0x0F007044, 0x01190A00}, + {0x0F007048, 0x06120305}, + {0x0F00704c, 0x00000000}, + {0x0F007050, 0x0100001C}, + {0x0F007054, 0x00000000}, + {0x0F007058, 0x00000000}, + {0x0F00705c, 0x00000000}, + {0x0F007060, 0x00082ED6}, + {0x0F007064, 0x0000000A}, + {0x0F007068, 0x00000000}, + {0x0F00706c, 0x00000001}, + {0x0F007070, 0x00005000}, + {0x0F007074, 0x00000000}, + {0x0F007078, 0x00000000}, + {0x0F00707C, 0x00000000}, + {0x0F007080, 0x00000000}, + {0x0F007084, 0x00000000}, + /* Enable BW improvement within memory controller */ + {0x0F007094, 0x00000104}, + /* Enable start bit within memory controller */ + {0x0F007018, 0x01010000} +}; -#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 9 //index for 0x0F007000 -static struct bcm_ddr_setting asT3LP_DDRSetting133MHz[]= {// # DPLL Clock Setting - {0x0f000820,0x03F1365B}, - {0x0f000810,0x00002F95}, - {0x0f000880,0x000003DD}, - // Changed source for X-bar and MIPS clock to APLL - {0x0f000840,0x0FFF0000}, - {0x0f000860,0x00000000}, - {0x0F00a044,0x1fffffff}, - {0x0F00a040,0x1f000000}, - {0x0F00a084,0x1Cffffff}, - {0x0F00a080,0x1C000000}, - {0x0F00A000,0x00000016}, - //Memcontroller Default values - {0x0F007000,0x00010001}, - {0x0F007004,0x01010100}, - {0x0F007008,0x01000001}, - {0x0F00700c,0x00000000}, - {0x0F007010,0x01000000}, - {0x0F007014,0x01000100}, - {0x0F007018,0x01000000}, - {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001 - {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107 - {0x0F007024,0x02000007}, - {0x0F007028,0x02020200}, - {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a - {0x0F007030,0x05000000}, - {0x0F007034,0x00000003}, - {0x0F007038,0x200a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200 - {0x0F00703C,0x02101020},//ROB - 0x02101010,//0x02101018, - {0x0F007040,0x45711200},//ROB - 0x45751200,//0x450f1200, - {0x0F007044,0x110D0D00},//ROB - 0x110a0d00//0x111f0d00 - {0x0F007048,0x04080306}, - {0x0F00704c,0x00000000}, - {0x0F007050,0x0100001c}, - {0x0F007054,0x00000000}, - {0x0F007058,0x00000000}, - {0x0F00705c,0x00000000}, - {0x0F007060,0x0010245F}, - {0x0F007064,0x00000010}, - {0x0F007068,0x00000000}, - {0x0F00706c,0x00000001}, - {0x0F007070,0x00007000}, - {0x0F007074,0x00000000}, - {0x0F007078,0x00000000}, - {0x0F00707C,0x00000000}, - {0x0F007080,0x00000000}, - {0x0F007084,0x00000000}, - {0x0F007088,0x01000001}, - {0x0F00708c,0x00000101}, - {0x0F007090,0x00000000}, - //# Enable BW improvement within memory controller - {0x0F007094,0x00040000}, - {0x0F007098,0x00000000}, - {0x0F0070c8,0x00000104}, - //# Enable 2 ports within X-bar - //# Enable start bit within memory controller - {0x0F007018,0x01010000} +#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 9 /* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3LP_DDRSetting133MHz[] = { /* DPLL Clock Setting */ + {0x0f000820, 0x03F1365B}, + {0x0f000810, 0x00002F95}, + {0x0f000880, 0x000003DD}, + /* Changed source for X-bar and MIPS clock to APLL */ + {0x0f000840, 0x0FFF0000}, + {0x0f000860, 0x00000000}, + {0x0F00a044, 0x1fffffff}, + {0x0F00a040, 0x1f000000}, + {0x0F00a084, 0x1Cffffff}, + {0x0F00a080, 0x1C000000}, + {0x0F00A000, 0x00000016}, + /* Memcontroller Default values */ + {0x0F007000, 0x00010001}, + {0x0F007004, 0x01010100}, + {0x0F007008, 0x01000001}, + {0x0F00700c, 0x00000000}, + {0x0F007010, 0x01000000}, + {0x0F007014, 0x01000100}, + {0x0F007018, 0x01000000}, + {0x0F00701c, 0x01020001}, + {0x0F007020, 0x04030107}, + {0x0F007024, 0x02000007}, + {0x0F007028, 0x02020200}, + {0x0F00702c, 0x0206060a}, + {0x0F007030, 0x05000000}, + {0x0F007034, 0x00000003}, + {0x0F007038, 0x200a0200}, + {0x0F00703C, 0x02101020}, + {0x0F007040, 0x45711200}, + {0x0F007044, 0x110D0D00}, + {0x0F007048, 0x04080306}, + {0x0F00704c, 0x00000000}, + {0x0F007050, 0x0100001c}, + {0x0F007054, 0x00000000}, + {0x0F007058, 0x00000000}, + {0x0F00705c, 0x00000000}, + {0x0F007060, 0x0010245F}, + {0x0F007064, 0x00000010}, + {0x0F007068, 0x00000000}, + {0x0F00706c, 0x00000001}, + {0x0F007070, 0x00007000}, + {0x0F007074, 0x00000000}, + {0x0F007078, 0x00000000}, + {0x0F00707C, 0x00000000}, + {0x0F007080, 0x00000000}, + {0x0F007084, 0x00000000}, + {0x0F007088, 0x01000001}, + {0x0F00708c, 0x00000101}, + {0x0F007090, 0x00000000}, + /* Enable BW improvement within memory controller */ + {0x0F007094, 0x00040000}, + {0x0F007098, 0x00000000}, + {0x0F0070c8, 0x00000104}, + /* Enable 2 ports within X-bar */ + /* Enable start bit within memory controller */ + {0x0F007018, 0x01010000} }; -#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 11 //index for 0x0F007000 -static struct bcm_ddr_setting asT3LP_DDRSetting100MHz[]= {// # DPLL Clock Setting - {0x0f000810,0x00002F95}, - {0x0f000820,0x03F1369B}, - {0x0f000840,0x0fff0000}, - {0x0f000860,0x00000000}, - {0x0f000880,0x000003DD}, - // Changed source for X-bar and MIPS clock to APLL - {0x0f000840,0x0FFF0000}, - {0x0F00a044,0x1fffffff}, - {0x0F00a040,0x1f000000}, - {0x0F00a084,0x1Cffffff}, - {0x0F00a080,0x1C000000}, - //Memcontroller Default values - {0x0F007000,0x00010001}, - {0x0F007004,0x01010100}, - {0x0F007008,0x01000001}, - {0x0F00700c,0x00000000}, - {0x0F007010,0x01000000}, - {0x0F007014,0x01000100}, - {0x0F007018,0x01000000}, - {0x0F00701c,0x01020000},// POP - 0x00020001 Normal 0x01020001 - {0x0F007020,0x04020107}, //Normal - 0x04030107 POP - 0x05030107 - {0x0F007024,0x00000007}, - {0x0F007028,0x01020200}, - {0x0F00702c,0x0204040a},//ROB- 0x0205050a,//0x0206060a - {0x0F007030,0x06000000}, - {0x0F007034,0x00000004}, - {0x0F007038,0x1F080200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200 - {0x0F00703C,0x0203031F},//ROB - 0x02101010,//0x02101018, - {0x0F007040,0x6e001200},//ROB - 0x45751200,//0x450f1200, - {0x0F007044,0x011a0a00},//ROB - 0x110a0d00//0x111f0d00 - {0x0F007048,0x03000305}, - {0x0F00704c,0x00000000}, - {0x0F007050,0x0100001c}, - {0x0F007054,0x00000000}, - {0x0F007058,0x00000000}, - {0x0F00705c,0x00000000}, - {0x0F007060,0x00082ED6}, - {0x0F007064,0x0000000A}, - {0x0F007068,0x00000000}, - {0x0F00706c,0x00000001}, - {0x0F007070,0x00005000}, - {0x0F007074,0x00000000}, - {0x0F007078,0x00000000}, - {0x0F00707C,0x00000000}, - {0x0F007080,0x00000000}, - {0x0F007084,0x00000000}, - {0x0F007088,0x01000001}, - {0x0F00708c,0x00000101}, - {0x0F007090,0x00000000}, - {0x0F007094,0x00010000}, - {0x0F007098,0x00000000}, - {0x0F0070C8,0x00000104}, - //# Enable 2 ports within X-bar - {0x0F00A000,0x00000016}, - //# Enable start bit within memory controller - {0x0F007018,0x01010000} +#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 11 /* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3LP_DDRSetting100MHz[] = { /* DPLL Clock Setting */ + {0x0f000810, 0x00002F95}, + {0x0f000820, 0x03F1369B}, + {0x0f000840, 0x0fff0000}, + {0x0f000860, 0x00000000}, + {0x0f000880, 0x000003DD}, + /* Changed source for X-bar and MIPS clock to APLL */ + {0x0f000840, 0x0FFF0000}, + {0x0F00a044, 0x1fffffff}, + {0x0F00a040, 0x1f000000}, + {0x0F00a084, 0x1Cffffff}, + {0x0F00a080, 0x1C000000}, + /* Memcontroller Default values */ + {0x0F007000, 0x00010001}, + {0x0F007004, 0x01010100}, + {0x0F007008, 0x01000001}, + {0x0F00700c, 0x00000000}, + {0x0F007010, 0x01000000}, + {0x0F007014, 0x01000100}, + {0x0F007018, 0x01000000}, + {0x0F00701c, 0x01020000}, + {0x0F007020, 0x04020107}, + {0x0F007024, 0x00000007}, + {0x0F007028, 0x01020200}, + {0x0F00702c, 0x0204040a}, + {0x0F007030, 0x06000000}, + {0x0F007034, 0x00000004}, + {0x0F007038, 0x1F080200}, + {0x0F00703C, 0x0203031F}, + {0x0F007040, 0x6e001200}, + {0x0F007044, 0x011a0a00}, + {0x0F007048, 0x03000305}, + {0x0F00704c, 0x00000000}, + {0x0F007050, 0x0100001c}, + {0x0F007054, 0x00000000}, + {0x0F007058, 0x00000000}, + {0x0F00705c, 0x00000000}, + {0x0F007060, 0x00082ED6}, + {0x0F007064, 0x0000000A}, + {0x0F007068, 0x00000000}, + {0x0F00706c, 0x00000001}, + {0x0F007070, 0x00005000}, + {0x0F007074, 0x00000000}, + {0x0F007078, 0x00000000}, + {0x0F00707C, 0x00000000}, + {0x0F007080, 0x00000000}, + {0x0F007084, 0x00000000}, + {0x0F007088, 0x01000001}, + {0x0F00708c, 0x00000101}, + {0x0F007090, 0x00000000}, + {0x0F007094, 0x00010000}, + {0x0F007098, 0x00000000}, + {0x0F0070C8, 0x00000104}, + /* Enable 2 ports within X-bar */ + {0x0F00A000, 0x00000016}, + /* Enable start bit within memory controller */ + {0x0F007018, 0x01010000} }; -#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 //index for 0x0F007000 -static struct bcm_ddr_setting asT3LP_DDRSetting80MHz[]= {// # DPLL Clock Setting - {0x0f000820,0x07F13FFF}, - {0x0f000810,0x00002F95}, - {0x0f000860,0x00000000}, - {0x0f000880,0x000003DD}, - {0x0f000840,0x0FFF1F00}, - {0x0F00a044,0x1fffffff}, - {0x0F00a040,0x1f000000}, - {0x0F00a084,0x1Cffffff}, - {0x0F00a080,0x1C000000}, - {0x0F00A000,0x00000016}, - {0x0f007000,0x00010001}, - {0x0f007004,0x01000000}, - {0x0f007008,0x01000001}, - {0x0f00700c,0x00000000}, - {0x0f007010,0x01000000}, - {0x0f007014,0x01000100}, - {0x0f007018,0x01000000}, - {0x0f00701c,0x01020000}, - {0x0f007020,0x04020107}, - {0x0f007024,0x00000007}, - {0x0f007028,0x02020200}, - {0x0f00702c,0x0204040a}, - {0x0f007030,0x04000000}, - {0x0f007034,0x00000002}, - {0x0f007038,0x1d060200}, - {0x0f00703c,0x1c22221d}, - {0x0f007040,0x8A116600}, - {0x0f007044,0x222d0800}, - {0x0f007048,0x02690204}, - {0x0f00704c,0x00000000}, - {0x0f007050,0x0100001c}, - {0x0f007054,0x00000000}, - {0x0f007058,0x00000000}, - {0x0f00705c,0x00000000}, - {0x0f007060,0x000A15D6}, - {0x0f007064,0x0000000A}, - {0x0f007068,0x00000000}, - {0x0f00706c,0x00000001}, - {0x0f007070,0x00004000}, - {0x0f007074,0x00000000}, - {0x0f007078,0x00000000}, - {0x0f00707c,0x00000000}, - {0x0f007080,0x00000000}, - {0x0f007084,0x00000000}, - {0x0f007088,0x01000001}, - {0x0f00708c,0x00000101}, - {0x0f007090,0x00000000}, - {0x0f007094,0x00010000}, - {0x0f007098,0x00000000}, - {0x0F0070C8,0x00000104}, - {0x0F007018,0x01010000} +#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 /* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3LP_DDRSetting80MHz[] = { /* DPLL Clock Setting */ + {0x0f000820, 0x07F13FFF}, + {0x0f000810, 0x00002F95}, + {0x0f000860, 0x00000000}, + {0x0f000880, 0x000003DD}, + {0x0f000840, 0x0FFF1F00}, + {0x0F00a044, 0x1fffffff}, + {0x0F00a040, 0x1f000000}, + {0x0F00a084, 0x1Cffffff}, + {0x0F00a080, 0x1C000000}, + {0x0F00A000, 0x00000016}, + {0x0f007000, 0x00010001}, + {0x0f007004, 0x01000000}, + {0x0f007008, 0x01000001}, + {0x0f00700c, 0x00000000}, + {0x0f007010, 0x01000000}, + {0x0f007014, 0x01000100}, + {0x0f007018, 0x01000000}, + {0x0f00701c, 0x01020000}, + {0x0f007020, 0x04020107}, + {0x0f007024, 0x00000007}, + {0x0f007028, 0x02020200}, + {0x0f00702c, 0x0204040a}, + {0x0f007030, 0x04000000}, + {0x0f007034, 0x00000002}, + {0x0f007038, 0x1d060200}, + {0x0f00703c, 0x1c22221d}, + {0x0f007040, 0x8A116600}, + {0x0f007044, 0x222d0800}, + {0x0f007048, 0x02690204}, + {0x0f00704c, 0x00000000}, + {0x0f007050, 0x0100001c}, + {0x0f007054, 0x00000000}, + {0x0f007058, 0x00000000}, + {0x0f00705c, 0x00000000}, + {0x0f007060, 0x000A15D6}, + {0x0f007064, 0x0000000A}, + {0x0f007068, 0x00000000}, + {0x0f00706c, 0x00000001}, + {0x0f007070, 0x00004000}, + {0x0f007074, 0x00000000}, + {0x0f007078, 0x00000000}, + {0x0f00707c, 0x00000000}, + {0x0f007080, 0x00000000}, + {0x0f007084, 0x00000000}, + {0x0f007088, 0x01000001}, + {0x0f00708c, 0x00000101}, + {0x0f007090, 0x00000000}, + {0x0f007094, 0x00010000}, + {0x0f007098, 0x00000000}, + {0x0F0070C8, 0x00000104}, + {0x0F007018, 0x01010000} }; -///T3 LP-B (UMA-B) +/* T3 LP-B (UMA-B) */ -#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ 7 //index for 0x0F007000 -static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[]= {// # DPLL Clock Setting - - {0x0f000820,0x03F137DB}, - {0x0f000810,0x01842795}, - {0x0f000860,0x00000000}, - {0x0f000880,0x000003DD}, - {0x0f000840,0x0FFF0400}, - {0x0F00a044,0x1fffffff}, - {0x0F00a040,0x1f000000}, - {0x0f003050,0x00000021},//this is flash/eeprom clock divisor which set the flash clock to 20 MHz - {0x0F00a084,0x1Cffffff},//Now dump from her in internal memory - {0x0F00a080,0x1C000000}, - {0x0F00A000,0x00000016}, - {0x0f007000,0x00010001}, - {0x0f007004,0x01000001}, - {0x0f007008,0x01000101}, - {0x0f00700c,0x00000000}, - {0x0f007010,0x01000100}, - {0x0f007014,0x01000100}, - {0x0f007018,0x01000000}, - {0x0f00701c,0x01020000}, - {0x0f007020,0x04030107}, - {0x0f007024,0x02000007}, - {0x0f007028,0x02020200}, - {0x0f00702c,0x0206060a}, - {0x0f007030,0x050d0d00}, - {0x0f007034,0x00000003}, - {0x0f007038,0x170a0200}, - {0x0f00703c,0x02101012}, - {0x0f007040,0x45161200}, - {0x0f007044,0x11250c00}, - {0x0f007048,0x04da0307}, - {0x0f00704c,0x00000000}, - {0x0f007050,0x0000001c}, - {0x0f007054,0x00000000}, - {0x0f007058,0x00000000}, - {0x0f00705c,0x00000000}, - {0x0f007060,0x00142bb6}, - {0x0f007064,0x20430014}, - {0x0f007068,0x00000000}, - {0x0f00706c,0x00000001}, - {0x0f007070,0x00009000}, - {0x0f007074,0x00000000}, - {0x0f007078,0x00000000}, - {0x0f00707c,0x00000000}, - {0x0f007080,0x00000000}, - {0x0f007084,0x00000000}, - {0x0f007088,0x01000001}, - {0x0f00708c,0x00000101}, - {0x0f007090,0x00000000}, - {0x0f007094,0x00040000}, - {0x0f007098,0x00000000}, - {0x0F0070C8,0x00000104}, - {0x0F007018,0x01010000} +#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ 7 /* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[] = { /* DPLL Clock Setting */ + {0x0f000820, 0x03F137DB}, + {0x0f000810, 0x01842795}, + {0x0f000860, 0x00000000}, + {0x0f000880, 0x000003DD}, + {0x0f000840, 0x0FFF0400}, + {0x0F00a044, 0x1fffffff}, + {0x0F00a040, 0x1f000000}, + {0x0f003050, 0x00000021}, /* this is flash/eeprom clock divisor which set the flash clock to 20 MHz */ + {0x0F00a084, 0x1Cffffff}, /* Now dump from her in internal memory */ + {0x0F00a080, 0x1C000000}, + {0x0F00A000, 0x00000016}, + {0x0f007000, 0x00010001}, + {0x0f007004, 0x01000001}, + {0x0f007008, 0x01000101}, + {0x0f00700c, 0x00000000}, + {0x0f007010, 0x01000100}, + {0x0f007014, 0x01000100}, + {0x0f007018, 0x01000000}, + {0x0f00701c, 0x01020000}, + {0x0f007020, 0x04030107}, + {0x0f007024, 0x02000007}, + {0x0f007028, 0x02020200}, + {0x0f00702c, 0x0206060a}, + {0x0f007030, 0x050d0d00}, + {0x0f007034, 0x00000003}, + {0x0f007038, 0x170a0200}, + {0x0f00703c, 0x02101012}, + {0x0f007040, 0x45161200}, + {0x0f007044, 0x11250c00}, + {0x0f007048, 0x04da0307}, + {0x0f00704c, 0x00000000}, + {0x0f007050, 0x0000001c}, + {0x0f007054, 0x00000000}, + {0x0f007058, 0x00000000}, + {0x0f00705c, 0x00000000}, + {0x0f007060, 0x00142bb6}, + {0x0f007064, 0x20430014}, + {0x0f007068, 0x00000000}, + {0x0f00706c, 0x00000001}, + {0x0f007070, 0x00009000}, + {0x0f007074, 0x00000000}, + {0x0f007078, 0x00000000}, + {0x0f00707c, 0x00000000}, + {0x0f007080, 0x00000000}, + {0x0f007084, 0x00000000}, + {0x0f007088, 0x01000001}, + {0x0f00708c, 0x00000101}, + {0x0f007090, 0x00000000}, + {0x0f007094, 0x00040000}, + {0x0f007098, 0x00000000}, + {0x0F0070C8, 0x00000104}, + {0x0F007018, 0x01010000} }; -#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 7 //index for 0x0F007000 -static struct bcm_ddr_setting asT3LPB_DDRSetting133MHz[]= {// # DPLL Clock Setting - {0x0f000820,0x03F1365B}, - {0x0f000810,0x00002F95}, - {0x0f000880,0x000003DD}, - // Changed source for X-bar and MIPS clock to APLL - {0x0f000840,0x0FFF0000}, - {0x0f000860,0x00000000}, - {0x0F00a044,0x1fffffff}, - {0x0F00a040,0x1f000000}, - {0x0f003050,0x00000021},//flash/eeprom clock divisor which set the flash clock to 20 MHz - {0x0F00a084,0x1Cffffff},//dump from here in internal memory - {0x0F00a080,0x1C000000}, - {0x0F00A000,0x00000016}, - //Memcontroller Default values - {0x0F007000,0x00010001}, - {0x0F007004,0x01010100}, - {0x0F007008,0x01000001}, - {0x0F00700c,0x00000000}, - {0x0F007010,0x01000000}, - {0x0F007014,0x01000100}, - {0x0F007018,0x01000000}, - {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001 - {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107 - {0x0F007024,0x02000007}, - {0x0F007028,0x02020200}, - {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a - {0x0F007030,0x05000000}, - {0x0F007034,0x00000003}, - {0x0F007038,0x190a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200 - {0x0F00703C,0x02101017},//ROB - 0x02101010,//0x02101018, - {0x0F007040,0x45171200},//ROB - 0x45751200,//0x450f1200, - {0x0F007044,0x11290D00},//ROB - 0x110a0d00//0x111f0d00 - {0x0F007048,0x04080306}, - {0x0F00704c,0x00000000}, - {0x0F007050,0x0100001c}, - {0x0F007054,0x00000000}, - {0x0F007058,0x00000000}, - {0x0F00705c,0x00000000}, - {0x0F007060,0x0010245F}, - {0x0F007064,0x00000010}, - {0x0F007068,0x00000000}, - {0x0F00706c,0x00000001}, - {0x0F007070,0x00007000}, - {0x0F007074,0x00000000}, - {0x0F007078,0x00000000}, - {0x0F00707C,0x00000000}, - {0x0F007080,0x00000000}, - {0x0F007084,0x00000000}, - {0x0F007088,0x01000001}, - {0x0F00708c,0x00000101}, - {0x0F007090,0x00000000}, - //# Enable BW improvement within memory controller - {0x0F007094,0x00040000}, - {0x0F007098,0x00000000}, - {0x0F0070c8,0x00000104}, - //# Enable 2 ports within X-bar - //# Enable start bit within memory controller - {0x0F007018,0x01010000} +#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 7 /* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3LPB_DDRSetting133MHz[] = { /* DPLL Clock Setting */ + {0x0f000820, 0x03F1365B}, + {0x0f000810, 0x00002F95}, + {0x0f000880, 0x000003DD}, + /* Changed source for X-bar and MIPS clock to APLL */ + {0x0f000840, 0x0FFF0000}, + {0x0f000860, 0x00000000}, + {0x0F00a044, 0x1fffffff}, + {0x0F00a040, 0x1f000000}, + {0x0f003050, 0x00000021}, /* flash/eeprom clock divisor which set the flash clock to 20 MHz */ + {0x0F00a084, 0x1Cffffff}, /* dump from here in internal memory */ + {0x0F00a080, 0x1C000000}, + {0x0F00A000, 0x00000016}, + /* Memcontroller Default values */ + {0x0F007000, 0x00010001}, + {0x0F007004, 0x01010100}, + {0x0F007008, 0x01000001}, + {0x0F00700c, 0x00000000}, + {0x0F007010, 0x01000000}, + {0x0F007014, 0x01000100}, + {0x0F007018, 0x01000000}, + {0x0F00701c, 0x01020001}, + {0x0F007020, 0x04030107}, + {0x0F007024, 0x02000007}, + {0x0F007028, 0x02020200}, + {0x0F00702c, 0x0206060a}, + {0x0F007030, 0x05000000}, + {0x0F007034, 0x00000003}, + {0x0F007038, 0x190a0200}, + {0x0F00703C, 0x02101017}, + {0x0F007040, 0x45171200}, + {0x0F007044, 0x11290D00}, + {0x0F007048, 0x04080306}, + {0x0F00704c, 0x00000000}, + {0x0F007050, 0x0100001c}, + {0x0F007054, 0x00000000}, + {0x0F007058, 0x00000000}, + {0x0F00705c, 0x00000000}, + {0x0F007060, 0x0010245F}, + {0x0F007064, 0x00000010}, + {0x0F007068, 0x00000000}, + {0x0F00706c, 0x00000001}, + {0x0F007070, 0x00007000}, + {0x0F007074, 0x00000000}, + {0x0F007078, 0x00000000}, + {0x0F00707C, 0x00000000}, + {0x0F007080, 0x00000000}, + {0x0F007084, 0x00000000}, + {0x0F007088, 0x01000001}, + {0x0F00708c, 0x00000101}, + {0x0F007090, 0x00000000}, + /* Enable BW improvement within memory controller */ + {0x0F007094, 0x00040000}, + {0x0F007098, 0x00000000}, + {0x0F0070c8, 0x00000104}, + /* Enable 2 ports within X-bar */ + /* Enable start bit within memory controller */ + {0x0F007018, 0x01010000} }; -#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 8 //index for 0x0F007000 -static struct bcm_ddr_setting asT3LPB_DDRSetting100MHz[]= {// # DPLL Clock Setting - {0x0f000810,0x00002F95}, - {0x0f000820,0x03F1369B}, - {0x0f000840,0x0fff0000}, - {0x0f000860,0x00000000}, - {0x0f000880,0x000003DD}, - // Changed source for X-bar and MIPS clock to APLL - {0x0f000840,0x0FFF0000}, - {0x0F00a044,0x1fffffff}, - {0x0F00a040,0x1f000000}, - {0x0f003050,0x00000021},//flash/eeprom clock divisor which set the flash clock to 20 MHz - {0x0F00a084,0x1Cffffff}, //dump from here in internal memory - {0x0F00a080,0x1C000000}, - //Memcontroller Default values - {0x0F007000,0x00010001}, - {0x0F007004,0x01010100}, - {0x0F007008,0x01000001}, - {0x0F00700c,0x00000000}, - {0x0F007010,0x01000000}, - {0x0F007014,0x01000100}, - {0x0F007018,0x01000000}, - {0x0F00701c,0x01020000},// POP - 0x00020001 Normal 0x01020001 - {0x0F007020,0x04020107}, //Normal - 0x04030107 POP - 0x05030107 - {0x0F007024,0x00000007}, - {0x0F007028,0x01020200}, - {0x0F00702c,0x0204040a},//ROB- 0x0205050a,//0x0206060a - {0x0F007030,0x06000000}, - {0x0F007034,0x00000004}, - {0x0F007038,0x1F080200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200 - {0x0F00703C,0x0203031F},//ROB - 0x02101010,//0x02101018, - {0x0F007040,0x6e001200},//ROB - 0x45751200,//0x450f1200, - {0x0F007044,0x011a0a00},//ROB - 0x110a0d00//0x111f0d00 - {0x0F007048,0x03000305}, - {0x0F00704c,0x00000000}, - {0x0F007050,0x0100001c}, - {0x0F007054,0x00000000}, - {0x0F007058,0x00000000}, - {0x0F00705c,0x00000000}, - {0x0F007060,0x00082ED6}, - {0x0F007064,0x0000000A}, - {0x0F007068,0x00000000}, - {0x0F00706c,0x00000001}, - {0x0F007070,0x00005000}, - {0x0F007074,0x00000000}, - {0x0F007078,0x00000000}, - {0x0F00707C,0x00000000}, - {0x0F007080,0x00000000}, - {0x0F007084,0x00000000}, - {0x0F007088,0x01000001}, - {0x0F00708c,0x00000101}, - {0x0F007090,0x00000000}, - {0x0F007094,0x00010000}, - {0x0F007098,0x00000000}, - {0x0F0070C8,0x00000104}, - //# Enable 2 ports within X-bar - {0x0F00A000,0x00000016}, - //# Enable start bit within memory controller - {0x0F007018,0x01010000} +#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 8 /* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3LPB_DDRSetting100MHz[] = { /* DPLL Clock Setting */ + {0x0f000810, 0x00002F95}, + {0x0f000820, 0x03F1369B}, + {0x0f000840, 0x0fff0000}, + {0x0f000860, 0x00000000}, + {0x0f000880, 0x000003DD}, + /* Changed source for X-bar and MIPS clock to APLL */ + {0x0f000840, 0x0FFF0000}, + {0x0F00a044, 0x1fffffff}, + {0x0F00a040, 0x1f000000}, + {0x0f003050, 0x00000021}, /* flash/eeprom clock divisor which set the flash clock to 20 MHz */ + {0x0F00a084, 0x1Cffffff}, /* dump from here in internal memory */ + {0x0F00a080, 0x1C000000}, + /* Memcontroller Default values */ + {0x0F007000, 0x00010001}, + {0x0F007004, 0x01010100}, + {0x0F007008, 0x01000001}, + {0x0F00700c, 0x00000000}, + {0x0F007010, 0x01000000}, + {0x0F007014, 0x01000100}, + {0x0F007018, 0x01000000}, + {0x0F00701c, 0x01020000}, + {0x0F007020, 0x04020107}, + {0x0F007024, 0x00000007}, + {0x0F007028, 0x01020200}, + {0x0F00702c, 0x0204040a}, + {0x0F007030, 0x06000000}, + {0x0F007034, 0x00000004}, + {0x0F007038, 0x1F080200}, + {0x0F00703C, 0x0203031F}, + {0x0F007040, 0x6e001200}, + {0x0F007044, 0x011a0a00}, + {0x0F007048, 0x03000305}, + {0x0F00704c, 0x00000000}, + {0x0F007050, 0x0100001c}, + {0x0F007054, 0x00000000}, + {0x0F007058, 0x00000000}, + {0x0F00705c, 0x00000000}, + {0x0F007060, 0x00082ED6}, + {0x0F007064, 0x0000000A}, + {0x0F007068, 0x00000000}, + {0x0F00706c, 0x00000001}, + {0x0F007070, 0x00005000}, + {0x0F007074, 0x00000000}, + {0x0F007078, 0x00000000}, + {0x0F00707C, 0x00000000}, + {0x0F007080, 0x00000000}, + {0x0F007084, 0x00000000}, + {0x0F007088, 0x01000001}, + {0x0F00708c, 0x00000101}, + {0x0F007090, 0x00000000}, + {0x0F007094, 0x00010000}, + {0x0F007098, 0x00000000}, + {0x0F0070C8, 0x00000104}, + /* Enable 2 ports within X-bar */ + {0x0F00A000, 0x00000016}, + /* Enable start bit within memory controller */ + {0x0F007018, 0x01010000} }; -#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 7 //index for 0x0F007000 -static struct bcm_ddr_setting asT3LPB_DDRSetting80MHz[]= {// # DPLL Clock Setting - {0x0f000820,0x07F13FFF}, - {0x0f000810,0x00002F95}, - {0x0f000860,0x00000000}, - {0x0f000880,0x000003DD}, - {0x0f000840,0x0FFF1F00}, - {0x0F00a044,0x1fffffff}, - {0x0F00a040,0x1f000000}, - {0x0f003050,0x00000021},//flash/eeprom clock divisor which set the flash clock to 20 MHz - {0x0F00a084,0x1Cffffff},// dump from here in internal memory - {0x0F00a080,0x1C000000}, - {0x0F00A000,0x00000016}, - {0x0f007000,0x00010001}, - {0x0f007004,0x01000000}, - {0x0f007008,0x01000001}, - {0x0f00700c,0x00000000}, - {0x0f007010,0x01000000}, - {0x0f007014,0x01000100}, - {0x0f007018,0x01000000}, - {0x0f00701c,0x01020000}, - {0x0f007020,0x04020107}, - {0x0f007024,0x00000007}, - {0x0f007028,0x02020200}, - {0x0f00702c,0x0204040a}, - {0x0f007030,0x04000000}, - {0x0f007034,0x00000002}, - {0x0f007038,0x1d060200}, - {0x0f00703c,0x1c22221d}, - {0x0f007040,0x8A116600}, - {0x0f007044,0x222d0800}, - {0x0f007048,0x02690204}, - {0x0f00704c,0x00000000}, - {0x0f007050,0x0100001c}, - {0x0f007054,0x00000000}, - {0x0f007058,0x00000000}, - {0x0f00705c,0x00000000}, - {0x0f007060,0x000A15D6}, - {0x0f007064,0x0000000A}, - {0x0f007068,0x00000000}, - {0x0f00706c,0x00000001}, - {0x0f007070,0x00004000}, - {0x0f007074,0x00000000}, - {0x0f007078,0x00000000}, - {0x0f00707c,0x00000000}, - {0x0f007080,0x00000000}, - {0x0f007084,0x00000000}, - {0x0f007088,0x01000001}, - {0x0f00708c,0x00000101}, - {0x0f007090,0x00000000}, - {0x0f007094,0x00010000}, - {0x0f007098,0x00000000}, - {0x0F0070C8,0x00000104}, - {0x0F007018,0x01010000} +#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 7 /* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3LPB_DDRSetting80MHz[] = { /* DPLL Clock Setting */ + {0x0f000820, 0x07F13FFF}, + {0x0f000810, 0x00002F95}, + {0x0f000860, 0x00000000}, + {0x0f000880, 0x000003DD}, + {0x0f000840, 0x0FFF1F00}, + {0x0F00a044, 0x1fffffff}, + {0x0F00a040, 0x1f000000}, + {0x0f003050, 0x00000021}, /* flash/eeprom clock divisor which set the flash clock to 20 MHz */ + {0x0F00a084, 0x1Cffffff}, /* dump from here in internal memory */ + {0x0F00a080, 0x1C000000}, + {0x0F00A000, 0x00000016}, + {0x0f007000, 0x00010001}, + {0x0f007004, 0x01000000}, + {0x0f007008, 0x01000001}, + {0x0f00700c, 0x00000000}, + {0x0f007010, 0x01000000}, + {0x0f007014, 0x01000100}, + {0x0f007018, 0x01000000}, + {0x0f00701c, 0x01020000}, + {0x0f007020, 0x04020107}, + {0x0f007024, 0x00000007}, + {0x0f007028, 0x02020200}, + {0x0f00702c, 0x0204040a}, + {0x0f007030, 0x04000000}, + {0x0f007034, 0x00000002}, + {0x0f007038, 0x1d060200}, + {0x0f00703c, 0x1c22221d}, + {0x0f007040, 0x8A116600}, + {0x0f007044, 0x222d0800}, + {0x0f007048, 0x02690204}, + {0x0f00704c, 0x00000000}, + {0x0f007050, 0x0100001c}, + {0x0f007054, 0x00000000}, + {0x0f007058, 0x00000000}, + {0x0f00705c, 0x00000000}, + {0x0f007060, 0x000A15D6}, + {0x0f007064, 0x0000000A}, + {0x0f007068, 0x00000000}, + {0x0f00706c, 0x00000001}, + {0x0f007070, 0x00004000}, + {0x0f007074, 0x00000000}, + {0x0f007078, 0x00000000}, + {0x0f00707c, 0x00000000}, + {0x0f007080, 0x00000000}, + {0x0f007084, 0x00000000}, + {0x0f007088, 0x01000001}, + {0x0f00708c, 0x00000101}, + {0x0f007090, 0x00000000}, + {0x0f007094, 0x00010000}, + {0x0f007098, 0x00000000}, + {0x0F0070C8, 0x00000104}, + {0x0F007018, 0x01010000} }; int ddr_init(struct bcm_mini_adapter *Adapter) { - struct bcm_ddr_setting *psDDRSetting=NULL; - ULONG RegCount=0; + struct bcm_ddr_setting *psDDRSetting = NULL; + ULONG RegCount = 0; UINT value = 0; UINT uiResetValue = 0; UINT uiClockSetting = 0; int retval = STATUS_SUCCESS; - switch (Adapter->chip_id) - { + switch (Adapter->chip_id) { case 0xbece3200: - switch (Adapter->DDRSetting) - { - case DDR_80_MHZ: - psDDRSetting=asT3LP_DDRSetting80MHz; - RegCount=(sizeof(asT3LP_DDRSetting80MHz)/ - sizeof(struct bcm_ddr_setting)); - break; - case DDR_100_MHZ: - psDDRSetting=asT3LP_DDRSetting100MHz; - RegCount=(sizeof(asT3LP_DDRSetting100MHz)/ - sizeof(struct bcm_ddr_setting)); - break; - case DDR_133_MHZ: - psDDRSetting=asT3LP_DDRSetting133MHz; - RegCount=(sizeof(asT3LP_DDRSetting133MHz)/ - sizeof(struct bcm_ddr_setting)); - if(Adapter->bMipsConfig == MIPS_200_MHZ) - { - uiClockSetting = 0x03F13652; - } - else - { - uiClockSetting = 0x03F1365B; - } - break; - default: - return -EINVAL; - } + switch (Adapter->DDRSetting) { + case DDR_80_MHZ: + psDDRSetting = asT3LP_DDRSetting80MHz; + RegCount = (sizeof(asT3LP_DDRSetting80MHz)/ + sizeof(struct bcm_ddr_setting)); + break; + case DDR_100_MHZ: + psDDRSetting = asT3LP_DDRSetting100MHz; + RegCount = (sizeof(asT3LP_DDRSetting100MHz)/ + sizeof(struct bcm_ddr_setting)); + break; + case DDR_133_MHZ: + psDDRSetting = asT3LP_DDRSetting133MHz; + RegCount = (sizeof(asT3LP_DDRSetting133MHz)/ + sizeof(struct bcm_ddr_setting)); + if (Adapter->bMipsConfig == MIPS_200_MHZ) + uiClockSetting = 0x03F13652; + else + uiClockSetting = 0x03F1365B; + break; + default: + return -EINVAL; + } break; case T3LPB: case BCS220_2: case BCS220_2BC: case BCS250_BC: - case BCS220_3 : + case BCS220_3: /* Set bit 2 and bit 6 to 1 for BBIC 2mA drive * (please check current value and additionally set these bits) */ - if( (Adapter->chip_id != BCS220_2) && - (Adapter->chip_id != BCS220_2BC) && - (Adapter->chip_id != BCS220_3) ) - { - retval= rdmalt(Adapter,(UINT)0x0f000830, &uiResetValue, sizeof(uiResetValue)); - if(retval < 0) { - BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); - return retval; - } - uiResetValue |= 0x44; - retval = wrmalt(Adapter,(UINT)0x0f000830, &uiResetValue, sizeof(uiResetValue)); - if(retval < 0) { - BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); - return retval; - } + if ((Adapter->chip_id != BCS220_2) && + (Adapter->chip_id != BCS220_2BC) && + (Adapter->chip_id != BCS220_3)) { + retval = rdmalt(Adapter,(UINT)0x0f000830, &uiResetValue, sizeof(uiResetValue)); + if (retval < 0) { + BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); + return retval; } - switch(Adapter->DDRSetting) - { + uiResetValue |= 0x44; + retval = wrmalt(Adapter,(UINT)0x0f000830, &uiResetValue, sizeof(uiResetValue)); + if (retval < 0) { + BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); + return retval; + } + } + switch (Adapter->DDRSetting) { - case DDR_80_MHZ: - psDDRSetting = asT3LPB_DDRSetting80MHz; - RegCount=(sizeof(asT3B_DDRSetting80MHz)/ - sizeof(struct bcm_ddr_setting)); + case DDR_80_MHZ: + psDDRSetting = asT3LPB_DDRSetting80MHz; + RegCount = (sizeof(asT3B_DDRSetting80MHz)/ + sizeof(struct bcm_ddr_setting)); break; - case DDR_100_MHZ: - psDDRSetting=asT3LPB_DDRSetting100MHz; - RegCount=(sizeof(asT3B_DDRSetting100MHz)/ - sizeof(struct bcm_ddr_setting)); + case DDR_100_MHZ: + psDDRSetting = asT3LPB_DDRSetting100MHz; + RegCount = (sizeof(asT3B_DDRSetting100MHz)/ + sizeof(struct bcm_ddr_setting)); break; - case DDR_133_MHZ: - psDDRSetting = asT3LPB_DDRSetting133MHz; - RegCount=(sizeof(asT3B_DDRSetting133MHz)/ - sizeof(struct bcm_ddr_setting)); + case DDR_133_MHZ: + psDDRSetting = asT3LPB_DDRSetting133MHz; + RegCount = (sizeof(asT3B_DDRSetting133MHz)/ + sizeof(struct bcm_ddr_setting)); - if(Adapter->bMipsConfig == MIPS_200_MHZ) - { - uiClockSetting = 0x03F13652; - } - else - { - uiClockSetting = 0x03F1365B; - } + if (Adapter->bMipsConfig == MIPS_200_MHZ) + uiClockSetting = 0x03F13652; + else + uiClockSetting = 0x03F1365B; break; - case DDR_160_MHZ: - psDDRSetting = asT3LPB_DDRSetting160MHz; - RegCount = sizeof(asT3LPB_DDRSetting160MHz)/sizeof(struct bcm_ddr_setting); + case DDR_160_MHZ: + psDDRSetting = asT3LPB_DDRSetting160MHz; + RegCount = sizeof(asT3LPB_DDRSetting160MHz)/sizeof(struct bcm_ddr_setting); - if(Adapter->bMipsConfig == MIPS_200_MHZ) - { - uiClockSetting = 0x03F137D2; - } - else - { - uiClockSetting = 0x03F137DB; - } - } + if (Adapter->bMipsConfig == MIPS_200_MHZ) + uiClockSetting = 0x03F137D2; + else + uiClockSetting = 0x03F137DB; + } break; case 0xbece0110: @@ -888,68 +871,59 @@ int ddr_init(struct bcm_mini_adapter *Adapter) case 0xbece0121: case 0xbece0130: case 0xbece0300: - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "DDR Setting: %x\n", Adapter->DDRSetting); - switch (Adapter->DDRSetting) - { - case DDR_80_MHZ: - psDDRSetting = asT3_DDRSetting80MHz; - RegCount = (sizeof(asT3_DDRSetting80MHz)/ - sizeof(struct bcm_ddr_setting)); - break; - case DDR_100_MHZ: - psDDRSetting = asT3_DDRSetting100MHz; - RegCount = (sizeof(asT3_DDRSetting100MHz)/ - sizeof(struct bcm_ddr_setting)); - break; - case DDR_133_MHZ: - psDDRSetting = asT3_DDRSetting133MHz; - RegCount = (sizeof(asT3_DDRSetting133MHz)/ - sizeof(struct bcm_ddr_setting)); - break; - default: - return -EINVAL; - } + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "DDR Setting: %x\n", Adapter->DDRSetting); + switch (Adapter->DDRSetting) { + case DDR_80_MHZ: + psDDRSetting = asT3_DDRSetting80MHz; + RegCount = (sizeof(asT3_DDRSetting80MHz)/ + sizeof(struct bcm_ddr_setting)); + break; + case DDR_100_MHZ: + psDDRSetting = asT3_DDRSetting100MHz; + RegCount = (sizeof(asT3_DDRSetting100MHz)/ + sizeof(struct bcm_ddr_setting)); + break; + case DDR_133_MHZ: + psDDRSetting = asT3_DDRSetting133MHz; + RegCount = (sizeof(asT3_DDRSetting133MHz)/ + sizeof(struct bcm_ddr_setting)); + break; + default: + return -EINVAL; + } case 0xbece0310: { - switch (Adapter->DDRSetting) - { - case DDR_80_MHZ: - psDDRSetting = asT3B_DDRSetting80MHz; - RegCount=(sizeof(asT3B_DDRSetting80MHz)/ - sizeof(struct bcm_ddr_setting)); - break; - case DDR_100_MHZ: - psDDRSetting=asT3B_DDRSetting100MHz; - RegCount=(sizeof(asT3B_DDRSetting100MHz)/ - sizeof(struct bcm_ddr_setting)); + switch (Adapter->DDRSetting) { + case DDR_80_MHZ: + psDDRSetting = asT3B_DDRSetting80MHz; + RegCount = (sizeof(asT3B_DDRSetting80MHz)/ + sizeof(struct bcm_ddr_setting)); + break; + case DDR_100_MHZ: + psDDRSetting = asT3B_DDRSetting100MHz; + RegCount = (sizeof(asT3B_DDRSetting100MHz)/ + sizeof(struct bcm_ddr_setting)); break; - case DDR_133_MHZ: + case DDR_133_MHZ: - if(Adapter->bDPLLConfig == PLL_266_MHZ)//266Mhz PLL selected. - { - memcpy(asT3B_DDRSetting133MHz, asDPLL_266MHZ, - sizeof(asDPLL_266MHZ)); - psDDRSetting = asT3B_DDRSetting133MHz; - RegCount=(sizeof(asT3B_DDRSetting133MHz)/ - sizeof(struct bcm_ddr_setting)); - } + if (Adapter->bDPLLConfig == PLL_266_MHZ) { /* 266Mhz PLL selected. */ + memcpy(asT3B_DDRSetting133MHz, asDPLL_266MHZ, + sizeof(asDPLL_266MHZ)); + psDDRSetting = asT3B_DDRSetting133MHz; + RegCount = (sizeof(asT3B_DDRSetting133MHz)/ + sizeof(struct bcm_ddr_setting)); + } else { + psDDRSetting = asT3B_DDRSetting133MHz; + RegCount = (sizeof(asT3B_DDRSetting133MHz)/ + sizeof(struct bcm_ddr_setting)); + if (Adapter->bMipsConfig == MIPS_200_MHZ) + uiClockSetting = 0x07F13652; else - { - psDDRSetting = asT3B_DDRSetting133MHz; - RegCount=(sizeof(asT3B_DDRSetting133MHz)/ - sizeof(struct bcm_ddr_setting)); - if(Adapter->bMipsConfig == MIPS_200_MHZ) - { - uiClockSetting = 0x07F13652; - } - else - { - uiClockSetting = 0x07F1365B; - } - } - break; - default: - return -EINVAL; + uiClockSetting = 0x07F1365B; + } + break; + default: + return -EINVAL; } break; @@ -958,20 +932,15 @@ int ddr_init(struct bcm_mini_adapter *Adapter) return -EINVAL; } - value=0; + value = 0; BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "Register Count is =%lu\n", RegCount); - while(RegCount && !retval) - { - if(uiClockSetting && psDDRSetting->ulRegAddress == MIPS_CLOCK_REG) - { + while (RegCount && !retval) { + if (uiClockSetting && psDDRSetting->ulRegAddress == MIPS_CLOCK_REG) value = uiClockSetting; - } else - { value = psDDRSetting->ulRegValue; - } retval = wrmalt(Adapter, psDDRSetting->ulRegAddress, &value, sizeof(value)); - if(STATUS_SUCCESS != retval) { + if (STATUS_SUCCESS != retval) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "%s:%d\n", __func__, __LINE__); break; } @@ -980,36 +949,34 @@ int ddr_init(struct bcm_mini_adapter *Adapter) psDDRSetting++; } - if(Adapter->chip_id >= 0xbece3300 ) - { + if (Adapter->chip_id >= 0xbece3300) { mdelay(3); - if( (Adapter->chip_id != BCS220_2)&& - (Adapter->chip_id != BCS220_2BC)&& - (Adapter->chip_id != BCS220_3)) - { + if ((Adapter->chip_id != BCS220_2) && + (Adapter->chip_id != BCS220_2BC) && + (Adapter->chip_id != BCS220_3)) { /* drive MDDR to half in case of UMA-B: */ uiResetValue = 0x01010001; retval = wrmalt(Adapter, (UINT)0x0F007018, &uiResetValue, sizeof(uiResetValue)); - if(retval < 0) { + if (retval < 0) { BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); return retval; } uiResetValue = 0x00040020; retval = wrmalt(Adapter, (UINT)0x0F007094, &uiResetValue, sizeof(uiResetValue)); - if(retval < 0) { + if (retval < 0) { BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); return retval; } uiResetValue = 0x01020101; retval = wrmalt(Adapter, (UINT)0x0F00701c, &uiResetValue, sizeof(uiResetValue)); - if(retval < 0) { + if (retval < 0) { BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); return retval; } uiResetValue = 0x01010000; retval = wrmalt(Adapter, (UINT)0x0F007018, &uiResetValue, sizeof(uiResetValue)); - if(retval < 0) { + if (retval < 0) { BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); return retval; } @@ -1020,75 +987,72 @@ int ddr_init(struct bcm_mini_adapter *Adapter) * This is to be done only for Hybrid PMU mode. * with the current h/w there is no way to detect this. * and since we dont have internal PMU lets do it under UMA-B chip id. - * we will change this when we will have internal PMU. - */ - if(Adapter->PmuMode == HYBRID_MODE_7C) - { + * we will change this when we will have internal PMU. + */ + if (Adapter->PmuMode == HYBRID_MODE_7C) { retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue)); - if(retval < 0) { + if (retval < 0) { BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); return retval; } retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue)); - if(retval < 0) { + if (retval < 0) { BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); return retval; } uiResetValue = 0x1322a8; retval = wrmalt(Adapter, (UINT)0x0f000d1c, &uiResetValue, sizeof(uiResetValue)); - if(retval < 0) { + if (retval < 0) { BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); return retval; } retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue)); - if(retval < 0) { + if (retval < 0) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); return retval; } retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue)); - if(retval < 0) { + if (retval < 0) { BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); return retval; } uiResetValue = 0x132296; retval = wrmalt(Adapter, (UINT)0x0f000d14, &uiResetValue, sizeof(uiResetValue)); - if(retval < 0) { + if (retval < 0) { BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); return retval; } - } - else if(Adapter->PmuMode == HYBRID_MODE_6 ) - { + } else if (Adapter->PmuMode == HYBRID_MODE_6) { retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue)); - if(retval < 0) { + if (retval < 0) { BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); return retval; } retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue)); - if(retval < 0) { + if (retval < 0) { BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); return retval; } uiResetValue = 0x6003229a; retval = wrmalt(Adapter, (UINT)0x0f000d14, &uiResetValue, sizeof(uiResetValue)); - if(retval < 0) { + if (retval < 0) { BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); return retval; } retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue)); - if(retval < 0) { + if (retval < 0) { BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); return retval; } retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue)); - if(retval < 0) { + if (retval < 0) { BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); return retval; } uiResetValue = 0x1322a8; retval = wrmalt(Adapter, (UINT)0x0f000d1c, &uiResetValue, sizeof(uiResetValue)); - if(retval < 0) { + if (retval < 0) { BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); return retval; } @@ -1101,179 +1065,167 @@ int ddr_init(struct bcm_mini_adapter *Adapter) int download_ddr_settings(struct bcm_mini_adapter *Adapter) { - struct bcm_ddr_setting *psDDRSetting=NULL; - ULONG RegCount=0; + struct bcm_ddr_setting *psDDRSetting = NULL; + ULONG RegCount = 0; unsigned long ul_ddr_setting_load_addr = DDR_DUMP_INTERNAL_DEVICE_MEMORY; UINT value = 0; int retval = STATUS_SUCCESS; bool bOverrideSelfRefresh = false; - switch (Adapter->chip_id) - { + switch (Adapter->chip_id) { case 0xbece3200: - switch (Adapter->DDRSetting) - { - case DDR_80_MHZ: - psDDRSetting = asT3LP_DDRSetting80MHz; - RegCount = ARRAY_SIZE(asT3LP_DDRSetting80MHz); - RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; - psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; + switch (Adapter->DDRSetting) { + case DDR_80_MHZ: + psDDRSetting = asT3LP_DDRSetting80MHz; + RegCount = ARRAY_SIZE(asT3LP_DDRSetting80MHz); + RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; + psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; + break; + case DDR_100_MHZ: + psDDRSetting = asT3LP_DDRSetting100MHz; + RegCount = ARRAY_SIZE(asT3LP_DDRSetting100MHz); + RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; + psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; + break; + case DDR_133_MHZ: + bOverrideSelfRefresh = TRUE; + psDDRSetting = asT3LP_DDRSetting133MHz; + RegCount = ARRAY_SIZE(asT3LP_DDRSetting133MHz); + RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; + psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; break; - case DDR_100_MHZ: - psDDRSetting = asT3LP_DDRSetting100MHz; - RegCount = ARRAY_SIZE(asT3LP_DDRSetting100MHz); - RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; - psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; - break; - case DDR_133_MHZ: - bOverrideSelfRefresh = TRUE; - psDDRSetting = asT3LP_DDRSetting133MHz; - RegCount = ARRAY_SIZE(asT3LP_DDRSetting133MHz); - RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; - psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; - break; default: return -EINVAL; - } + } break; case T3LPB: case BCS220_2: case BCS220_2BC: case BCS250_BC: - case BCS220_3 : - switch (Adapter->DDRSetting) - { - case DDR_80_MHZ: - psDDRSetting = asT3LPB_DDRSetting80MHz; - RegCount=ARRAY_SIZE(asT3LPB_DDRSetting80MHz); - RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; - psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; + case BCS220_3: + switch (Adapter->DDRSetting) { + case DDR_80_MHZ: + psDDRSetting = asT3LPB_DDRSetting80MHz; + RegCount = ARRAY_SIZE(asT3LPB_DDRSetting80MHz); + RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; + psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; + break; + case DDR_100_MHZ: + psDDRSetting = asT3LPB_DDRSetting100MHz; + RegCount = ARRAY_SIZE(asT3LPB_DDRSetting100MHz); + RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; + psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; + break; + case DDR_133_MHZ: + bOverrideSelfRefresh = TRUE; + psDDRSetting = asT3LPB_DDRSetting133MHz; + RegCount = ARRAY_SIZE(asT3LPB_DDRSetting133MHz); + RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; + psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; break; - case DDR_100_MHZ: - psDDRSetting = asT3LPB_DDRSetting100MHz; - RegCount = ARRAY_SIZE(asT3LPB_DDRSetting100MHz); - RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; - psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; - break; - case DDR_133_MHZ: - bOverrideSelfRefresh = TRUE; - psDDRSetting = asT3LPB_DDRSetting133MHz; - RegCount = ARRAY_SIZE(asT3LPB_DDRSetting133MHz); - RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; - psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; - break; - case DDR_160_MHZ: - bOverrideSelfRefresh = TRUE; - psDDRSetting = asT3LPB_DDRSetting160MHz; - RegCount = ARRAY_SIZE(asT3LPB_DDRSetting160MHz); - RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ; - psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ; + case DDR_160_MHZ: + bOverrideSelfRefresh = TRUE; + psDDRSetting = asT3LPB_DDRSetting160MHz; + RegCount = ARRAY_SIZE(asT3LPB_DDRSetting160MHz); + RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ; + psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ; - break; - default: - return -EINVAL; - } + break; + default: + return -EINVAL; + } break; case 0xbece0300: - switch (Adapter->DDRSetting) - { - case DDR_80_MHZ: - psDDRSetting = asT3_DDRSetting80MHz; - RegCount = ARRAY_SIZE(asT3_DDRSetting80MHz); - RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; - psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; + switch (Adapter->DDRSetting) { + case DDR_80_MHZ: + psDDRSetting = asT3_DDRSetting80MHz; + RegCount = ARRAY_SIZE(asT3_DDRSetting80MHz); + RegCount -= T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; + psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; break; - case DDR_100_MHZ: - psDDRSetting = asT3_DDRSetting100MHz; - RegCount = ARRAY_SIZE(asT3_DDRSetting100MHz); - RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; - psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; - break; - case DDR_133_MHZ: - psDDRSetting = asT3_DDRSetting133MHz; - RegCount = ARRAY_SIZE(asT3_DDRSetting133MHz); - RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; - psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; - break; - default: - return -EINVAL; - } + case DDR_100_MHZ: + psDDRSetting = asT3_DDRSetting100MHz; + RegCount = ARRAY_SIZE(asT3_DDRSetting100MHz); + RegCount -= T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; + psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; + break; + case DDR_133_MHZ: + psDDRSetting = asT3_DDRSetting133MHz; + RegCount = ARRAY_SIZE(asT3_DDRSetting133MHz); + RegCount -= T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; + psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; + break; + default: + return -EINVAL; + } break; case 0xbece0310: { - switch (Adapter->DDRSetting) - { - case DDR_80_MHZ: - psDDRSetting = asT3B_DDRSetting80MHz; - RegCount = ARRAY_SIZE(asT3B_DDRSetting80MHz); - RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; - psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; - break; - case DDR_100_MHZ: - psDDRSetting = asT3B_DDRSetting100MHz; - RegCount = ARRAY_SIZE(asT3B_DDRSetting100MHz); - RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; - psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; - break; - case DDR_133_MHZ: - bOverrideSelfRefresh = TRUE; - psDDRSetting = asT3B_DDRSetting133MHz; - RegCount = ARRAY_SIZE(asT3B_DDRSetting133MHz); - RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; - psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; - break; - } - break; + switch (Adapter->DDRSetting) { + case DDR_80_MHZ: + psDDRSetting = asT3B_DDRSetting80MHz; + RegCount = ARRAY_SIZE(asT3B_DDRSetting80MHz); + RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; + psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; + break; + case DDR_100_MHZ: + psDDRSetting = asT3B_DDRSetting100MHz; + RegCount = ARRAY_SIZE(asT3B_DDRSetting100MHz); + RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; + psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; + break; + case DDR_133_MHZ: + bOverrideSelfRefresh = TRUE; + psDDRSetting = asT3B_DDRSetting133MHz; + RegCount = ARRAY_SIZE(asT3B_DDRSetting133MHz); + RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; + psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; + break; + } + break; } default: return -EINVAL; } - //total number of Register that has to be dumped - value =RegCount ; + /* total number of Register that has to be dumped */ + value = RegCount; retval = wrmalt(Adapter, ul_ddr_setting_load_addr, &value, sizeof(value)); - if(retval) - { + if (retval) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "%s:%d\n", __func__, __LINE__); return retval; } ul_ddr_setting_load_addr += sizeof(ULONG); - /*signature */ - value =(0x1d1e0dd0); + /* signature */ + value = (0x1d1e0dd0); retval = wrmalt(Adapter, ul_ddr_setting_load_addr, &value, sizeof(value)); - if(retval) - { + if (retval) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "%s:%d\n", __func__, __LINE__); return retval; } ul_ddr_setting_load_addr += sizeof(ULONG); - RegCount*=(sizeof(struct bcm_ddr_setting)/sizeof(ULONG)); + RegCount *= (sizeof(struct bcm_ddr_setting)/sizeof(ULONG)); - while(RegCount && !retval) - { - value = psDDRSetting->ulRegAddress ; - retval = wrmalt( Adapter, ul_ddr_setting_load_addr, &value, sizeof(value)); + while (RegCount && !retval) { + value = psDDRSetting->ulRegAddress; + retval = wrmalt(Adapter, ul_ddr_setting_load_addr, &value, sizeof(value)); ul_ddr_setting_load_addr += sizeof(ULONG); - if(!retval) - { - if(bOverrideSelfRefresh && (psDDRSetting->ulRegAddress == 0x0F007018)) - { + if (!retval) { + if (bOverrideSelfRefresh && (psDDRSetting->ulRegAddress == 0x0F007018)) { value = (psDDRSetting->ulRegValue |(1<<8)); - if(STATUS_SUCCESS != wrmalt(Adapter, ul_ddr_setting_load_addr, - &value, sizeof(value))){ - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "%s:%d\n", __func__, __LINE__); - break; - } + if (STATUS_SUCCESS != wrmalt(Adapter, ul_ddr_setting_load_addr, + &value, sizeof(value))) { + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "%s:%d\n", __func__, __LINE__); + break; } - else - { + } else { value = psDDRSetting->ulRegValue; - if(STATUS_SUCCESS != wrmalt(Adapter, ul_ddr_setting_load_addr , - &value, sizeof(value))){ + if (STATUS_SUCCESS != wrmalt(Adapter, ul_ddr_setting_load_addr , + &value, sizeof(value))) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "%s:%d\n", __func__, __LINE__); break; } @@ -1283,7 +1235,5 @@ int download_ddr_settings(struct bcm_mini_adapter *Adapter) RegCount--; psDDRSetting++; } - return retval; + return retval; } - -