X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=drivers%2Fstaging%2Fet131x%2Fet131x_adapter.h;h=c852f867645f8979968599692441a73bb17e2954;hb=ae3e5f0e9a27b0c015570cb2899484c1456846a7;hp=64a678fcb60a511e1e7d243907947312ba01a1aa;hpb=fc7f99cf36ebae853639dabb43bc2f0098c59aef;p=karo-tx-linux.git

diff --git a/drivers/staging/et131x/et131x_adapter.h b/drivers/staging/et131x/et131x_adapter.h
index 64a678fcb60a..c852f867645f 100644
--- a/drivers/staging/et131x/et131x_adapter.h
+++ b/drivers/staging/et131x/et131x_adapter.h
@@ -83,21 +83,19 @@
 #define LO_MARK_PERCENT_FOR_RX      15
 
 /* RFD (Receive Frame Descriptor) */
-typedef struct _MP_RFD {
+struct rfd {
 	struct list_head list_node;
-	struct sk_buff *Packet;
-	u32 PacketSize;	/* total size of receive frame */
+	struct sk_buff *skb;
+	u32 len;	/* total size of receive frame */
 	u16 bufferindex;
 	u8 ringindex;
-} MP_RFD, *PMP_RFD;
+};
 
-/* Enum for Flow Control */
-typedef enum _eflow_control_t {
-	Both = 0,
-	TxOnly = 1,
-	RxOnly = 2,
-	None = 3
-} eFLOW_CONTROL_t, *PeFLOW_CONTROL_t;
+/* Flow Control */
+#define FLOW_BOTH	0
+#define FLOW_TXONLY	1
+#define FLOW_RXONLY	2
+#define FLOW_NONE	3
 
 /* Struct to define some device statistics */
 typedef struct _ce_stats_t {
@@ -147,19 +145,6 @@ typedef struct _ce_stats_t {
 	u32 InterruptStatus;
 } CE_STATS_t, *PCE_STATS_t;
 
-typedef struct _MP_POWER_MGMT {
-	/* variable putting the phy into coma mode when boot up with no cable
-	 * plugged in after 5 seconds
-	 */
-	u8 TransPhyComaModeOnBoot;
-
-	/* Next two used to save power information at power down. This
-	 * information will be used during power up to set up parts of Power
-	 * Management in JAGCore
-	 */
-	u16 PowerDownSpeed;
-	u8 PowerDownDuplex;
-} MP_POWER_MGMT, *PMP_POWER_MGMT;
 
 /* The private adapter structure */
 struct et131x_adapter {
@@ -173,19 +158,19 @@ struct et131x_adapter {
 	u32 HwErrCount;
 
 	/* Configuration  */
-	u8 PermanentAddress[ETH_ALEN];
-	u8 CurrentAddress[ETH_ALEN];
+	u8 rom_addr[ETH_ALEN];
+	u8 addr[ETH_ALEN];
 	bool has_eeprom;
-	u8 eepromData[2];
+	u8 eeprom_data[2];
 
 	/* Spinlocks */
 	spinlock_t Lock;
 
 	spinlock_t TCBSendQLock;
 	spinlock_t TCBReadyQLock;
-	spinlock_t SendHWLock;
+	spinlock_t send_hw_lock;
 
-	spinlock_t RcvLock;
+	spinlock_t rcv_lock;
 	spinlock_t RcvPendLock;
 	spinlock_t FbrLock;
 
@@ -205,7 +190,7 @@ struct et131x_adapter {
 
 	/* Registry parameters */
 	u8 SpeedDuplex;		/* speed/duplex */
-	eFLOW_CONTROL_t RegistryFlowControl;	/* for 802.3x flow control */
+	u8 wanted_flow;		/* Flow we want for 802.3x flow control */
 	u8 RegistryPhyComa;	/* Phy Coma mode enable/disable */
 
 	u32 RegistryRxMemEnd;	/* Size of internal rx memory */
@@ -214,8 +199,8 @@ struct et131x_adapter {
 
 	/* Derived from the registry: */
 	u8 AiForceDpx;		/* duplex setting */
-	u16 AiForceSpeed;		/* 'Speed', user over-ride of line speed */
-	eFLOW_CONTROL_t FlowControl;	/* flow control validated by the far-end */
+	u16 AiForceSpeed;	/* 'Speed', user over-ride of line speed */
+	u8 flowcontrol;		/* flow control validated by the far-end */
 	enum {
 		NETIF_STATUS_INVALID = 0,
 		NETIF_STATUS_MEDIA_CONNECT,
@@ -225,7 +210,19 @@ struct et131x_adapter {
 
 	/* Minimize init-time */
 	struct timer_list ErrorTimer;
-	MP_POWER_MGMT PoMgmt;
+
+	/* variable putting the phy into coma mode when boot up with no cable
+	 * plugged in after 5 seconds
+	 */
+	u8 boot_coma;
+
+	/* Next two used to save power information at power down. This
+	 * information will be used during power up to set up parts of Power
+	 * Management in JAGCore
+	 */
+	u16 pdown_speed;
+	u8 pdown_duplex;
+
 	u32 CachedMaskValue;
 
 	/* Xcvr status at last poll */