X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=drivers%2Fusb%2Fhost%2Fehci-pci.c;h=5bb7f6bb13f340a80f5fbd746e515f792fabe370;hb=129bd474a80726247e5b1c61fe66a413e63053bc;hp=ad0d4965f2fb5df834cc54d0f5b6eed29d1e5e3b;hpb=65a6ec0d72a07f16719e9b7a96e1c4bae044b591;p=karo-tx-linux.git

diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index ad0d4965f2fb..5bb7f6bb13f3 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -130,6 +130,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 	case PCI_VENDOR_ID_TDI:
 		if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
 			ehci->is_tdi_rh_tt = 1;
+			hcd->has_tt = 1;
 			tdi_reset(ehci);
 		}
 		break;
@@ -152,6 +153,20 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 			break;
 		}
 		break;
+	case PCI_VENDOR_ID_VIA:
+		if (pdev->device == 0x3104 && (pdev->revision & 0xf0) == 0x60) {
+			u8 tmp;
+
+			/* The VT6212 defaults to a 1 usec EHCI sleep time which
+			 * hogs the PCI bus *badly*. Setting bit 5 of 0x4B makes
+			 * that sleep time use the conventional 10 usec.
+			 */
+			pci_read_config_byte(pdev, 0x4b, &tmp);
+			if (tmp & 0x20)
+				break;
+			pci_write_config_byte(pdev, 0x4b, tmp | 0x20);
+		}
+		break;
 	}
 
 	ehci_reset(ehci);
@@ -207,6 +222,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		ehci_warn(ehci, "selective suspend/wakeup unavailable\n");
 #endif
 
+	ehci_port_power(ehci, 1);
 	retval = ehci_pci_reinit(ehci, pdev);
 done:
 	return retval;
@@ -285,7 +301,7 @@ static int ehci_pci_resume(struct usb_hcd *hcd)
 	if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) {
 		int	mask = INTR_MASK;
 
-		if (!device_may_wakeup(&hcd->self.root_hub->dev))
+		if (!hcd->self.root_hub->do_remote_wakeup)
 			mask &= ~STS_PCD;
 		ehci_writel(ehci, mask, &ehci->regs->intr_enable);
 		ehci_readl(ehci, &ehci->regs->intr_enable);
@@ -305,7 +321,7 @@ static int ehci_pci_resume(struct usb_hcd *hcd)
 	/* emptying the schedule aborts any urbs */
 	spin_lock_irq(&ehci->lock);
 	if (ehci->reclaim)
-		ehci->reclaim_ready = 1;
+		end_unlink_async(ehci);
 	ehci_work(ehci);
 	spin_unlock_irq(&ehci->lock);
 
@@ -315,7 +331,6 @@ static int ehci_pci_resume(struct usb_hcd *hcd)
 
 	/* here we "know" root ports should always stay powered */
 	ehci_port_power(ehci, 1);
-	ehci_handover_companion_ports(ehci);
 
 	hcd->state = HC_STATE_SUSPENDED;
 	return 0;
@@ -339,8 +354,8 @@ static const struct hc_driver ehci_pci_hc_driver = {
 	.reset =		ehci_pci_setup,
 	.start =		ehci_run,
 #ifdef	CONFIG_PM
-	.suspend =		ehci_pci_suspend,
-	.resume =		ehci_pci_resume,
+	.pci_suspend =		ehci_pci_suspend,
+	.pci_resume =		ehci_pci_resume,
 #endif
 	.stop =			ehci_stop,
 	.shutdown =		ehci_shutdown,
@@ -364,6 +379,7 @@ static const struct hc_driver ehci_pci_hc_driver = {
 	.hub_control =		ehci_hub_control,
 	.bus_suspend =		ehci_bus_suspend,
 	.bus_resume =		ehci_bus_resume,
+	.relinquish_port = 	ehci_relinquish_port,
 };
 
 /*-------------------------------------------------------------------------*/