X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=include%2Faxp209.h;h=6170202b4c7b56156f82dc4a6a847dc035524d15;hb=992474c0b7ba8d8c51d81ff966e8e94d3d171bdb;hp=043624953add783369ae90e86beffb1e5e4a6d3a;hpb=bd5053ffa5b8162257537bdb79ba829372423096;p=karo-tx-uboot.git

diff --git a/include/axp209.h b/include/axp209.h
index 043624953a..6170202b4c 100644
--- a/include/axp209.h
+++ b/include/axp209.h
@@ -4,7 +4,41 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#define AXP_GPIO
+enum axp209_reg {
+	AXP209_POWER_STATUS = 0x00,
+	AXP209_CHIP_VERSION = 0x03,
+	AXP209_DCDC2_VOLTAGE = 0x23,
+	AXP209_DCDC3_VOLTAGE = 0x27,
+	AXP209_LDO24_VOLTAGE = 0x28,
+	AXP209_LDO3_VOLTAGE = 0x29,
+	AXP209_IRQ_ENABLE1 = 0x40,
+	AXP209_IRQ_ENABLE2 = 0x41,
+	AXP209_IRQ_ENABLE3 = 0x42,
+	AXP209_IRQ_ENABLE4 = 0x43,
+	AXP209_IRQ_ENABLE5 = 0x44,
+	AXP209_IRQ_STATUS5 = 0x4c,
+	AXP209_SHUTDOWN = 0x32,
+};
+
+#define AXP209_POWER_STATUS_ON_BY_DC	(1 << 0)
+#define AXP209_POWER_STATUS_VBUS_USABLE	(1 << 4)
+
+#define AXP209_IRQ5_PEK_UP		(1 << 6)
+#define AXP209_IRQ5_PEK_DOWN		(1 << 5)
+
+#define AXP209_POWEROFF			(1 << 7)
+
+/* For axp_gpio.c */
+#define AXP_POWER_STATUS		0x00
+#define AXP_POWER_STATUS_VBUS_PRESENT		(1 << 5)
+#define AXP_GPIO0_CTRL			0x90
+#define AXP_GPIO1_CTRL			0x92
+#define AXP_GPIO2_CTRL			0x93
+#define AXP_GPIO_CTRL_OUTPUT_LOW		0x00 /* Drive pin low */
+#define AXP_GPIO_CTRL_OUTPUT_HIGH		0x01 /* Drive pin high */
+#define AXP_GPIO_CTRL_INPUT			0x02 /* Input */
+#define AXP_GPIO_STATE			0x94
+#define AXP_GPIO_STATE_OFFSET			4
 
 extern int axp209_set_dcdc2(int mvolt);
 extern int axp209_set_dcdc3(int mvolt);
@@ -14,8 +48,3 @@ extern int axp209_set_ldo4(int mvolt);
 extern int axp209_init(void);
 extern int axp209_poweron_by_dc(void);
 extern int axp209_power_button(void);
-
-extern int axp_gpio_direction_input(unsigned int pin);
-extern int axp_gpio_direction_output(unsigned int pin, unsigned int val);
-extern int axp_gpio_get_value(unsigned int pin);
-extern int axp_gpio_set_value(unsigned int pin, unsigned int val);