X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=include%2Fconfigs%2FP1010RDB.h;h=8ac7000989eb843b7022d937e176f692f06240f2;hb=574a33cc7082bee77ac5a71ea36972bc06e9962c;hp=51127c846190d8e95222d3709404edc0c57f1000;hpb=4ce99570292544746d738b0621f83da1d6ce4ddc;p=karo-tx-uboot.git

diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index 51127c8461..8ac7000989 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -14,6 +14,8 @@
 #ifdef CONFIG_36BIT
 #define CONFIG_PHYS_64BIT
 #endif
+#define	CONFIG_SYS_GENERIC_BOARD
+#define	CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_P1010
 #define CONFIG_E500			/* BOOKE e500 family */
@@ -21,7 +23,6 @@
 #define CONFIG_NAND_FSL_IFC
 
 #ifdef CONFIG_SDCARD
-#define CONFIG_SPL 1
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
@@ -54,9 +55,8 @@
 #ifdef CONFIG_SECURE_BOOT
 #define CONFIG_RAMBOOT_SPIFLASH
 #define CONFIG_SYS_TEXT_BASE		0x11000000
-#define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
+#define CONFIG_RESET_VECTOR_ADDRESS	0x110bfffc
 #else
-#define CONFIG_SPL 1
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
@@ -88,7 +88,6 @@
 #endif
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL 1
 #ifdef CONFIG_SECURE_BOOT
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
@@ -108,7 +107,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0
 #define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 #else
-#define CONFIG_TPL 1
 #ifdef CONFIG_TPL_BUILD
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
@@ -174,6 +172,7 @@
 #define CONFIG_BOOKE			/* BOOKE */
 #define CONFIG_E500			/* BOOKE e500 family */
 #define CONFIG_FSL_IFC			/* Enable IFC Support */
+#define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */
 #define CONFIG_SYS_HAS_SERDES		/* common SERDES init code */
 
 #define CONFIG_PCI			/* Enable PCI/PCIE */
@@ -185,10 +184,8 @@
 #define CONFIG_FSL_PCIE_RESET		/* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PCI
 
-#define CONFIG_E1000			/*  E1000 pci Ethernet card*/
 
 /*
  * PCI Windows
@@ -445,7 +442,6 @@ extern unsigned long get_sdram_size(void);
 
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #if defined(CONFIG_P1010RDB_PA)
@@ -683,7 +679,6 @@ extern unsigned long get_sdram_size(void);
 #if !defined(CONFIG_NAND) || !defined(CONFIG_NAND_SECBOOT)
 /* eSPI - Enhanced SPI */
 #define CONFIG_FSL_ESPI
-#define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_SPANSION
 #define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED		10000000
@@ -816,15 +811,12 @@ extern unsigned long get_sdram_size(void);
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_ERRATA
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_REGINFO
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled */
@@ -836,6 +828,12 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_DOS_PARTITION
 #endif
 
+/* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
+#define CONFIG_CMD_HASH
+#define CONFIG_SHA_HW_ACCEL
+#endif
+
 /*
  * Miscellaneous configurable options
  */
@@ -960,4 +958,8 @@ extern unsigned long get_sdram_size(void);
 
 #include <asm/fsl_secure_boot.h>
 
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_CMD_BLOB
+#endif
+
 #endif	/* __CONFIG_H */