X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=include%2Fconfigs%2FP1_P2_RDB.h;h=b592c1966aac3aac1b8695dfa18cdd9f37873517;hb=f15ea6e1d67782a1626d4a4922b6c20e380085e5;hp=2ac93be4ec59c277dfa3bdf62dd1dde01eb42cc3;hpb=e9d44b35beb45869863f3ca6929089d9df4df3e5;p=karo-tx-uboot.git

diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index 2ac93be4ec..b592c1966a 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -1,23 +1,7 @@
 /*
  * Copyright 2009-2011 Freescale Semiconductor, Inc.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -94,6 +78,7 @@
 #define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
 #define CONFIG_PCIE2		1	/* PCIE controler 2 (slot 2) */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1	/* indirect PCI bridge support */
 #define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 #endif /* #if defined(CONFIG_PCI) */
@@ -156,7 +141,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 
 /* DDR Setup */
-#define CONFIG_FSL_DDR2
+#define CONFIG_SYS_FSL_DDR2
 #undef CONFIG_FSL_DDR_INTERACTIVE
 #undef CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */
 
@@ -343,7 +328,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_NS16550_MIN_FUNCTIONS
 #endif
 
-#define CONFIG_SERIAL_MULTI	1 /* Enable both serial ports */
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV	/* determine from environment */
 
 #define CONFIG_SYS_BAUDRATE_TABLE	\
@@ -354,9 +338,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
-#ifdef	CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#endif
 
 /*
  * Pass open firmware flat tree
@@ -370,16 +351,15 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
 
 /* I2C */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{{0,0x29}}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x29} }
 
 /*
  * I2C2 EEPROM
@@ -606,7 +586,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
@@ -616,7 +595,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 						/* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -656,14 +634,19 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
 	"netdev=eth0\0"						\
-	"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
-	"loadaddr=1000000\0"			\
+	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"		\
+	"loadaddr=1000000\0"					\
 	"tftpflash=tftpboot $loadaddr $uboot; "			\
-		"protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "	\
-		"erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "		\
-		"cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "	\
-		"protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "		\
-		"cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"	\
+		"protect off " __stringify(CONFIG_SYS_TEXT_BASE)	\
+			" +$filesize; "	\
+		"erase " __stringify(CONFIG_SYS_TEXT_BASE)		\
+			" +$filesize; "	\
+		"cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)	\
+			" $filesize; "	\
+		"protect on " __stringify(CONFIG_SYS_TEXT_BASE)		\
+			" +$filesize; "	\
+		"cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)	\
+			" $filesize\0"	\
 	"consoledev=ttyS0\0"				\
 	"ramdiskaddr=2000000\0"			\
 	"ramdiskfile=rootfs.ext2.gz.uboot\0"		\