X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=include%2Fconfigs%2FT1040QDS.h;h=6b396bb695aa0c950e37eb58eed7d4cdf1fc104f;hb=d51aae64236878b72283bd135df716e30f7f5ded;hp=2215ac86abc2eed58213869ae3a216d28e6881a6;hpb=05d134b084590684bcf4d832c0035952727b7cd9;p=karo-tx-uboot.git

diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index 2215ac86ab..6b396bb695 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -28,6 +28,8 @@
  */
 #define CONFIG_T1040QDS
 #define CONFIG_PHYS_64BIT
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
@@ -58,6 +60,7 @@
 #define CONFIG_SYS_FSL_CPC		/* Corenet Platform Cache */
 #define CONFIG_SYS_NUM_CPC		CONFIG_NUM_DDR_CONTROLLERS
 #define CONFIG_FSL_IFC			/* Enable IFC Support */
+#define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */
 #define CONFIG_PCI			/* Enable PCI/PCIE */
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_PCIE1			/* PCIE controler 1 */
@@ -175,8 +178,8 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_DDR_SPD
 #ifndef CONFIG_SYS_FSL_DDR4
 #define CONFIG_SYS_FSL_DDR3
-#define CONFIG_FSL_DDR_INTERACTIVE
 #endif
+#define CONFIG_FSL_DDR_INTERACTIVE
 
 #define CONFIG_SYS_SPD_BUS_NUM	0
 #define SPD_EEPROM_ADDRESS	0x51
@@ -201,6 +204,12 @@ unsigned long get_board_ddr_clk(void);
 				CSPR_MSEL_NOR | \
 				CSPR_V)
 #define CONFIG_SYS_NOR_AMASK	IFC_AMASK(128*1024*1024)
+
+/*
+ * TDM Definition
+ */
+#define T1040_TDM_QUIRK_CCSR_BASE	0xfe000000
+
 /* NOR Flash Timing Params */
 #define CONFIG_SYS_NOR_CSOR	CSOR_NAND_TRHZ_80
 #define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x4) | \
@@ -410,6 +419,7 @@ unsigned long get_board_ddr_clk(void);
 /* Video */
 #define CONFIG_FSL_DIU_FB
 #ifdef CONFIG_FSL_DIU_FB
+#define CONFIG_FSL_DIU_CH7301
 #define CONFIG_SYS_DIU_ADDR	(CONFIG_SYS_CCSRBAR + 0x180000)
 #define CONFIG_VIDEO
 #define CONFIG_CMD_BMP
@@ -439,11 +449,17 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL		/* Use FSL common I2C driver */
 #define CONFIG_SYS_FSL_I2C_SPEED	50000	/* I2C speed in Hz */
+#define CONFIG_SYS_FSL_I2C2_SPEED	50000
+#define CONFIG_SYS_FSL_I2C3_SPEED	50000
+#define CONFIG_SYS_FSL_I2C4_SPEED	50000
 #define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C2_SPEED	50000	/* I2C speed in Hz */
 #define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C3_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C4_SLAVE	0x7F
 #define CONFIG_SYS_FSL_I2C_OFFSET	0x118000
-#define CONFIG_SYS_FSL_I2C2_OFFSET	0x119000
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x118100
+#define CONFIG_SYS_FSL_I2C3_OFFSET	0x119000
+#define CONFIG_SYS_FSL_I2C4_OFFSET	0x119100
 
 #define I2C_MUX_PCA_ADDR		0x77
 #define I2C_MUX_PCA_ADDR_PRI		0x77 /* Primary Mux*/
@@ -703,6 +719,12 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMD_NET
 #endif
 
+/* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
+#define CONFIG_CMD_HASH
+#define CONFIG_SHA_HW_ACCEL
+#endif
+
 /*
  * Miscellaneous configurable options
  */
@@ -710,7 +732,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
@@ -749,8 +770,7 @@ unsigned long get_board_ddr_clk(void);
 #define __USB_PHY_TYPE	utmi
 
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
-	"hwconfig=fsl_ddr:ctlr_intlv=cacheline,"		\
-	"bank_intlv=cs0_cs1;"					\
+	"hwconfig=fsl_ddr:bank_intlv=auto;"			\
 	"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 	"netdev=eth0\0"						\
 	"video-mode=fslfb:1024x768-32@60,monitor=dvi\0"		\
@@ -805,6 +825,7 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_SECURE_BOOT
 #include <asm/fsl_secure_boot.h>
+#define CONFIG_CMD_BLOB
 #endif
 
 #endif	/* __CONFIG_H */