X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=include%2Fconfigs%2FVCMA9.h;h=5b2e09222bf46a74bf0a429a644e80faf951682d;hb=ddc2d056e83d1a88dd24a5e03e7460dc37f2f423;hp=20344937bd3bf240509a58caa0f0bfd1ecef193c;hpb=58494052b5fa1c2cbed9f1e04049f2951708cfa3;p=karo-tx-uboot.git

diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index 20344937bd..5b2e09222b 100644
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -20,14 +20,15 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_ARM920T		/* This is an ARM920T Core */
-#define CONFIG_S3C24X0		/* in a SAMSUNG S3C24x0-type SoC */
+#define CONFIG_S3C24X0		/* This is a SAMSUNG S3C24x0-type SoC */
 #define CONFIG_S3C2410		/* specifically a SAMSUNG S3C2410 SoC */
 #define CONFIG_VCMA9		/* on a MPL VCMA9 Board  */
 #define CONFIG_MACH_TYPE	MACH_TYPE_MPL_VCMA9 /* Machine type */
 
 #define CONFIG_SYS_TEXT_BASE	0x0
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 #define CONFIG_SYS_ARM_CACHE_WRITETHROUGH
 
 /* input clock of PLL (VCMA9 has 12MHz input clock) */
@@ -48,8 +49,6 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_I2C
@@ -61,7 +60,6 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_YAFFS
 
 #define CONFIG_BOARD_LATE_INIT
 
@@ -73,12 +71,12 @@
  * the MPL VCMA9 is equipped with an ATMEL 24C256 EEPROM at
  * address 0x50 with 16bit addressing
  */
-#define CONFIG_HARD_I2C				/* I2C with hardware support */
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed */
-#define CONFIG_SYS_I2C_SLAVE		0x7F	/* I2C slave addr */
+#define CONFIG_SYS_I2C
 
 /* we use the built-in I2C controller */
-#define CONFIG_DRIVER_S3C24X0_I2C
+#define CONFIG_SYS_I2C_S3C24X0
+#define CONFIG_SYS_I2C_S3C24X0_SPEED    100000	/* I2C speed */
+#define CONFIG_SYS_I2C_S3C24X0_SLAVE    0x7F	/* I2C slave addr */
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
@@ -138,13 +136,10 @@
 #if defined(CONFIG_CMD_KGDB)
 /* speed to run kgdb serial port */
 #define CONFIG_KGDB_BAUDRATE		115200
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_PROMPT		"VCMA9 # "
 #define CONFIG_SYS_CBSIZE		256
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
@@ -162,7 +157,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x30800000
 
 /* we configure PWM Timer 4 to 1ms 1000Hz  */
-#define CONFIG_SYS_HZ			1000
 
 /* support additional compression methods */
 #define CONFIG_BZIP2
@@ -217,7 +211,6 @@
 
 /* File system */
 #define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 #define CONFIG_CMD_JFFS2