X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm_fx6.h;h=ddf6b5f131991174aace331709455df073f725e5;hb=f59138655e5ced0821201a6064b8ff1fc0fec614;hp=4c1bcb90d2913478c2defa135ebca4e0806b0599;hpb=a6b0652bb5040351eeb1a2580270bd3988cb0a59;p=karo-tx-uboot.git

diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index 4c1bcb90d2..ddf6b5f131 100644
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -11,39 +11,16 @@
 #ifndef __CONFIG_CM_FX6_H
 #define __CONFIG_CM_FX6_H
 
-#include <asm/arch/imx-regs.h>
-#include <config_distro_defaults.h>
 #include "mx6_common.h"
 
 /* Machine config */
-#define CONFIG_MX6
 #define CONFIG_SYS_LITTLE_ENDIAN
 #define CONFIG_MACH_TYPE		4273
-#define CONFIG_SYS_HZ			1000
-
-/* Display information on boot */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_TIMESTAMP
 
 /* CMD */
-#include <config_cmd_default.h>
 #define CONFIG_CMD_GREPENV
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_XIMG
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
 
 /* MMC */
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_USDHC_NUM	3
 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
 
@@ -68,23 +45,16 @@
 #define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
 
 /* Shell */
-#define CONFIG_SYS_PROMPT	"CM-FX6 # "
-#define CONFIG_SYS_CBSIZE	1024
-#define CONFIG_SYS_MAXARGS	16
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
 					sizeof(CONFIG_SYS_PROMPT) + 16)
 
 /* SPI flash */
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_BUS		0
 #define CONFIG_SF_DEFAULT_CS		0
 #define CONFIG_SF_DEFAULT_SPEED		25000000
 #define CONFIG_SF_DEFAULT_MODE		(SPI_MODE_0)
 
 /* Environment */
-#define CONFIG_ENV_OVERWRITE
 #define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
 #define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
@@ -95,85 +65,102 @@
 #define CONFIG_ENV_OFFSET		(768 * 1024)
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"kernel=uImage-cm-fx6\0" \
+	"stdin=serial,usbkbd\0" \
+	"stdout=serial,vga\0" \
+	"stderr=serial,vga\0" \
+	"panel=HDMI\0" \
 	"autoload=no\0" \
+	"kernel=uImage-cm-fx6\0" \
+	"script=boot.scr\0" \
+	"dtb=cm-fx6.dtb\0" \
+	"bootm_low=18000000\0" \
 	"loadaddr=0x10800000\0" \
 	"fdtaddr=0x11000000\0" \
 	"console=ttymxc3,115200\0" \
 	"ethprime=FEC0\0" \
-	"bootscr=boot.scr\0" \
-	"bootm_low=18000000\0" \
 	"video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \
 	"video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
-	"fdtfile=cm-fx6.dtb\0" \
 	"doboot=bootm ${loadaddr}\0" \
-	"loadfdt=false\0" \
+	"doloadfdt=false\0" \
 	"setboottypez=setenv kernel zImage-cm-fx6;" \
 		"setenv doboot bootz ${loadaddr} - ${fdtaddr};" \
-		"setenv loadfdt true;\0" \
+		"setenv doloadfdt true;\0" \
 	"setboottypem=setenv kernel uImage-cm-fx6;" \
 		"setenv doboot bootm ${loadaddr};" \
-		"setenv loadfdt false;\0"\
-	"run_eboot=echo Starting EBOOT ...; "\
-		"mmc dev ${mmcdev} && " \
-		"mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
-	"mmcdev=2\0" \
+		"setenv doloadfdt false;\0"\
 	"mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
-	"loadmmcbootscript=load mmc ${mmcdev} ${loadaddr} ${bootscr}\0" \
-	"mmcbootscript=echo Running bootscript from mmc ...; "\
-		"source ${loadaddr}\0" \
-	"mmcargs=setenv bootargs console=${console} " \
-		"root=${mmcroot} " \
-		"${video}\0" \
-	"mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \
-	"mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"run doboot\0" \
+	"sataroot=/dev/sda2 rw rootwait\0" \
 	"nandroot=/dev/mtdblock4 rw\0" \
 	"nandrootfstype=ubifs\0" \
+	"mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
+		"${video}\0" \
+	"sataargs=setenv bootargs console=${console} root=${sataroot} " \
+		"${video}\0" \
 	"nandargs=setenv bootargs console=${console} " \
 		"root=${nandroot} " \
 		"rootfstype=${nandrootfstype} " \
 		"${video}\0" \
-	"nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \
-	"nandboot=echo Booting from nand ...; " \
-		"run nandargs; " \
-		"nand read ${loadaddr} 0 780000; " \
-		"if ${loadfdt}; then " \
+	"nandboot=if run nandloadkernel; then " \
 			"run nandloadfdt;" \
-		"fi; " \
-		"run doboot\0" \
-	"boot=mmc dev ${mmcdev}; " \
-		"if mmc rescan; then " \
-			"if run loadmmcbootscript; then " \
-				"run mmcbootscript;" \
-			"else " \
-				"if run mmcloadkernel; then " \
-					"if ${loadfdt}; then " \
-						"run mmcloadfdt;" \
-					"fi;" \
-					"run mmcboot;" \
-				"fi;" \
-			"fi;" \
+			"run setboottypem;" \
+			"run storagebootcmd;" \
+			"run setboottypez;" \
+			"run storagebootcmd;" \
+		"fi;\0" \
+	"run_eboot=echo Starting EBOOT ...; "\
+		"mmc dev 2 && " \
+		"mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
+	"loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0"\
+	"loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0"\
+	"loadfdt=load ${storagetype} ${storagedev} ${fdtaddr} ${dtb};\0" \
+	"bootscript=echo Running bootscript from ${storagetype} ...;" \
+		   "source ${loadaddr};\0" \
+	"nandloadkernel=nand read ${loadaddr} 0 780000;\0" \
+	"nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \
+	"setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \
+	"setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \
+	"setupnandboot=setenv storagetype nand;\0" \
+	"setupusbboot=setenv storagetype usb; setenv storagedev 0;\0" \
+	"storagebootcmd=echo Booting from ${storagetype} ...;" \
+			"run ${storagetype}args; run doboot;\0" \
+	"trybootk=if run loadkernel; then " \
+		"if ${doloadfdt}; then " \
+			"run loadfdt;" \
+		"fi;" \
+		"run storagebootcmd;" \
+		"fi;\0" \
+	"trybootsmz=if run loadscript; then " \
+			"run bootscript;" \
 		"fi;" \
-		"run nandboot\0"
+		"run setboottypem;" \
+		"run trybootk;" \
+		"run setboottypez;" \
+		"run trybootk;\0"
 
 #define CONFIG_BOOTCOMMAND \
-	"run setboottypem; run boot"
+	"run setupmmcboot;" \
+	"mmc dev ${storagedev};" \
+	"if mmc rescan; then " \
+		"run trybootsmz;" \
+	"fi;" \
+	"run setupusbboot;" \
+	"if usb start; then "\
+		"if run loadscript; then " \
+			"run bootscript;" \
+		"fi;" \
+	"fi;" \
+	"run setupsataboot;" \
+	"if sata init; then " \
+		"run trybootsmz;" \
+	"fi;" \
+	"run setupnandboot;" \
+	"run nandboot;"
+
+#define CONFIG_PREBOOT		"usb start"
 
 /* SPI */
 #define CONFIG_SPI
 #define CONFIG_MXC_SPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_ATMEL
-#define CONFIG_SPI_FLASH_EON
-#define CONFIG_SPI_FLASH_GIGADEVICE
-#define CONFIG_SPI_FLASH_MACRONIX
-#define CONFIG_SPI_FLASH_SPANSION
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SPI_FLASH_SST
-#define CONFIG_SPI_FLASH_WINBOND
 
 /* NAND */
 #ifndef CONFIG_SPL_BUILD
@@ -189,23 +176,54 @@
 #define CONFIG_APBH_DMA_BURST8
 #endif
 
-/* GPIO */
-#define CONFIG_MXC_GPIO
+/* Ethernet */
+#define CONFIG_FEC_MXC
+#define CONFIG_FEC_MXC_PHYADDR		0
+#define CONFIG_FEC_XCV_TYPE		RGMII
+#define IMX_FEC_BASE			ENET_BASE_ADDR
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ATHEROS
+#define CONFIG_MII
+#define CONFIG_ETHPRIME			"FEC0"
+#define CONFIG_ARP_TIMEOUT		200UL
+#define CONFIG_NET_RETRY_COUNT		5
+
+/* USB */
+#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS		0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
+#define CONFIG_SYS_STDIO_DEREGISTER
+
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_MXC_I2C3_SPEED	400000
+
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
+#define CONFIG_SYS_I2C_EEPROM_BUS	2
+
+/* SATA */
+#define CONFIG_CMD_SATA
+#define CONFIG_SYS_SATA_MAX_DEVICE	1
+#define CONFIG_LIBATA
+#define CONFIG_LBA48
+#define CONFIG_DWC_AHSATA
+#define CONFIG_DWC_AHSATA_PORT_ID	0
+#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
 
 /* Boot */
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_LOADADDR			0x10800000
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
 #define CONFIG_SYS_BOOTMAPSZ	        (8 << 20)
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
+#define CONFIG_SERIAL_TAG
 
 /* misc */
-#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_STACKSIZE			(128 * 1024)
-#define CONFIG_SYS_MALLOC_LEN			(2 * 1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN			(10 * 1024 * 1024)
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	800 /* 400 KB */
+#define CONFIG_OF_BOARD_SETUP
 
 /* SPL */
 #include "imx6_spl.h"
@@ -218,4 +236,23 @@
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
 #define CONFIG_SPL_SPI_LOAD
 
+/* Display */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_IPUV3_CLK          260000000
+#define CONFIG_IMX_HDMI
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_VIDEO_SW_CURSOR
+
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SOURCE
+#define CONFIG_CMD_BMP
+#define CONFIG_VIDEO_BMP_RLE8
+
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+
 #endif	/* __CONFIG_CM_FX6_H */