X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=include%2Fconfigs%2Fibf-dsp561.h;h=47579296184b4db96f00eb484a2fb1e9e8419530;hb=508361f6a6f5faad602de2104718c3f3f70b7145;hp=7c9f71e88888e4392eb94414bd1c58469c410631;hpb=76d82187c6cccbcd8d514015c3b283f05ee8ac5c;p=karo-tx-uboot.git

diff --git a/include/configs/ibf-dsp561.h b/include/configs/ibf-dsp561.h
index 7c9f71e888..4757929618 100644
--- a/include/configs/ibf-dsp561.h
+++ b/include/configs/ibf-dsp561.h
@@ -57,6 +57,15 @@
 #define CONFIG_SYS_MALLOC_LEN	(128 * 1024)
 
 
+/*
+ * Network Settings
+ */
+#define ADI_CMDS_NETWORK	1
+#define CONFIG_DRIVER_AX88180	1
+#define AX88180_BASE		0x2c000000
+#define CONFIG_HOSTNAME		ibf-dsp561
+
+
 /*
  * Flash Settings
  */
@@ -68,10 +77,10 @@
 #define CONFIG_SYS_MAX_FLASH_SECT	135	/* max number of sectors on one chip */
 /* The BF561-EZKIT uses a top boot flash */
 #define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		0x20004000
-#define CONFIG_ENV_OFFSET		(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
+#define CONFIG_ENV_OFFSET		0x4000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 #define CONFIG_ENV_SIZE		0x2000
-#define CONFIG_ENV_SECT_SIZE	0x10000	/* Total Size of Environment Sector */
+#define CONFIG_ENV_SECT_SIZE	0x12000	/* Total Size of Environment Sector */
 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
 #define ENV_IS_EMBEDDED
 #else
@@ -84,52 +93,20 @@
  * it linked after the configuration sector.
  */
 # define LDS_BOARD_TEXT \
-	cpu/blackfin/traps.o		(.text .text.*); \
-	cpu/blackfin/interrupt.o	(.text .text.*); \
-	cpu/blackfin/serial.o		(.text .text.*); \
-	common/dlmalloc.o		(.text .text.*); \
-	lib_generic/crc32.o		(.text .text.*); \
-	lib_generic/zlib.o		(.text .text.*); \
-	board/ibf-dsp561/ibf-dsp561.o	(.text .text.*); \
+	arch/blackfin/lib/built-in.o (.text*); \
+	arch/blackfin/cpu/built-in.o (.text*); \
 	. = DEFINED(env_offset) ? env_offset : .; \
-	common/env_embedded.o		(.text .text.*);
+	common/env_embedded.o (.text*);
 #endif
 
 
 /*
  * I2C Settings
  */
-#define CONFIG_SOFT_I2C		1
-#define PF_SCL			0x1/*PF0*/
-#define PF_SDA			0x2/*PF1*/
-
-#ifdef CONFIG_SOFT_I2C
-#define I2C_INIT       do { *pFIO0_DIR |= PF_SCL; SSYNC(); } while (0)
-#define I2C_ACTIVE     do { *pFIO0_DIR |= PF_SDA; *pFIO0_INEN &= ~PF_SDA; SSYNC(); } while (0)
-#define I2C_TRISTATE   do { *pFIO0_DIR &= ~PF_SDA; *pFIO0_INEN |= PF_SDA; SSYNC(); } while (0)
-#define I2C_READ       ((*pFIO0_FLAG_D & PF_SDA) != 0)
-#define I2C_SDA(bit) \
-	do { \
-		if (bit) \
-			*pFIO0_FLAG_S = PF_SDA; \
-		else \
-			*pFIO0_FLAG_C = PF_SDA; \
-		SSYNC(); \
-	} while (0)
-#define I2C_SCL(bit) \
-	do { \
-		if (bit) \
-			*pFIO0_FLAG_S = PF_SCL; \
-		else \
-			*pFIO0_FLAG_C = PF_SCL; \
-		SSYNC(); \
-	} while (0)
-#define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
-
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
-#endif
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
+#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1
 
 /*
  * Misc Settings