X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=include%2Fconfigs%2Fls2080ardb.h;h=b93e919d0ad920bc54614a09eeb8c6bf5d3ba99d;hb=53b5bf3c1d24c3a0d92c7cf0824a51bde41ee321;hp=356d25415913e855615ff48290c353b4dfd09870;hpb=9e71bb9ca232038e8cdc1090cf218871afb6904a;p=karo-tx-uboot.git

diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 356d254159..b93e919d0a 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -14,6 +14,22 @@
 
 #define CONFIG_DISPLAY_BOARDINFO
 
+#define I2C_MUX_CH_VOL_MONITOR		0xa
+#define I2C_VOL_MONITOR_ADDR		0x38
+#define CONFIG_VOL_MONITOR_IR36021_READ
+#define CONFIG_VOL_MONITOR_IR36021_SET
+
+#define CONFIG_VID_FLS_ENV		"ls2080ardb_vdd_mv"
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_VID
+#endif
+/* step the IR regulator in 5mV increments */
+#define IR_VDD_STEP_DOWN		5
+#define IR_VDD_STEP_UP			5
+/* The lowest and highest voltage allowed for LS2080ARDB */
+#define VDD_MV_MIN			819
+#define VDD_MV_MAX			1212
+
 #ifndef __ASSEMBLY__
 unsigned long get_board_sys_clk(void);
 #endif
@@ -46,9 +62,7 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_CMD_SCSI
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
+#define CONFIG_SCSI
 #define CONFIG_DOS_PARTITION
 #define CONFIG_BOARD_LATE_INIT
 
@@ -111,7 +125,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_NAND_MAX_ECCPOS	256
 #define CONFIG_SYS_NAND_MAX_OOBFREE	2
 
-
 #define CONFIG_SYS_NAND_CSPR_EXT	(0x0)
 #define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 				| CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
@@ -256,7 +269,6 @@ unsigned long get_board_sys_clk(void);
 
 /* SPI */
 #ifdef CONFIG_FSL_DSPI
-#define CONFIG_CMD_SF
 #define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_BAR
 #endif
@@ -292,11 +304,9 @@ unsigned long get_board_sys_clk(void);
 /*  MMC  */
 #define CONFIG_MMC
 #ifdef CONFIG_MMC
-#define CONFIG_CMD_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -306,14 +316,9 @@ unsigned long get_board_sys_clk(void);
  * USB
  */
 #define CONFIG_HAS_FSL_XHCI_USB
-#define CONFIG_USB_XHCI
 #define CONFIG_USB_XHCI_FSL
-#define CONFIG_USB_XHCI_DWC3
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_EXT2
 
 /* Initial environment variables */
 #undef CONFIG_EXTRA_ENV_SETTINGS
@@ -327,11 +332,13 @@ unsigned long get_board_sys_clk(void);
 	"initrd_high=0xffffffffffffffff\0"	\
 	"kernel_start=0x581100000\0"		\
 	"kernel_load=0xa0000000\0"		\
-	"kernel_size=0x2800000\0"
+	"kernel_size=0x2800000\0"		\
+	"mcinitcmd=fsl_mc start mc 0x580300000"	\
+	" 0x580800000 \0"
 
 #undef CONFIG_BOOTARGS
 #define CONFIG_BOOTARGS		"console=ttyS1,115200 root=/dev/ram0 " \
-				"earlycon=uart8250,mmio,0x21c0600" \
+				"earlycon=uart8250,mmio,0x21c0600 " \
 				"ramdisk_size=0x2000000 default_hugepagesz=2m" \
 				" hugepagesz=2m hugepages=256"
 
@@ -353,11 +360,14 @@ unsigned long get_board_sys_clk(void);
 #define AQ_PHY_ADDR2		0x01
 #define AQ_PHY_ADDR3		0x02
 #define AQ_PHY_ADDR4		0x03
+#define AQR405_IRQ_MASK		0x36
 
 #define CONFIG_MII
-#define CONFIG_ETHPRIME		"DPNI1"
+#define CONFIG_ETHPRIME		"DPMAC1@xgmii"
 #define CONFIG_PHY_GIGE
 #define CONFIG_PHY_AQUANTIA
 #endif
 
+#include <asm/fsl_secure_boot.h>
+
 #endif /* __LS2_RDB_H */