X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=include%2Fconfigs%2Fmaxbcm.h;h=3530a2621389c9df30ed8aecffbc6b07dcfdc764;hb=3a926a304b9f7a74dbe67ae7dc4cb6c7a174c6c0;hp=a0ff067d1d2b0e9ebe2db6a7e086e4ce6d30f390;hpb=c79c93dcc3cb56b6016abb92b357c71aeb3217b7;p=karo-tx-uboot.git

diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h
index a0ff067d1d..3530a26213 100644
--- a/include/configs/maxbcm.h
+++ b/include/configs/maxbcm.h
@@ -15,14 +15,18 @@
 #define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_DISPLAY_BOARDINFO_LATE
 
-#define	CONFIG_SYS_TEXT_BASE	0x04000000
+/*
+ * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
+ * for DDR ECC byte filling in the SPL before loading the main
+ * U-Boot into it.
+ */
+#define	CONFIG_SYS_TEXT_BASE	0x00800000
 #define CONFIG_SYS_TCLK		250000000	/* 250MHz */
 
 /*
  * Commands configuration
  */
 #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
-#include <config_cmd_default.h>
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ENV
 #define CONFIG_CMD_I2C
@@ -44,7 +48,6 @@
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
 #define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_SPI_FLASH_SPANSION
-#define CONFIG_SPI_FLASH_BAR
 
 /* Environment in SPI NOR flash */
 #define CONFIG_ENV_IS_IN_SPI_FLASH
@@ -53,7 +56,7 @@
 #define CONFIG_ENV_SECT_SIZE		(64 << 10) /* 64KiB sectors */
 
 #define CONFIG_PHY_MARVELL		/* there is a marvell phy */
-#define CONFIG_PHY_BASE_ADDR	0x0
+#define CONFIG_PHY_ADDR			{ 0x0, 0x1, 0x2, 0x3 }
 #define CONFIG_SYS_NETA_INTERFACE_TYPE	PHY_INTERFACE_MODE_SGMII
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 #define CONFIG_RESET_PHY_R
@@ -110,7 +113,7 @@
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
 
 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
-#define CONFIG_SYS_MVEBU_DDR
+#define CONFIG_SYS_MVEBU_DDR_AXP
 #define CONFIG_DDR_FIXED_SIZE		(1 << 20)	/* 1GiB */
 
 #endif /* _CONFIG_DB_MV7846MP_GP_H */