X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=include%2Fconfigs%2Fmecp5123.h;h=4211e72dbaf5da27361b00c6e543ecc2c8ff9a86;hb=refs%2Fheads%2Fkaro-txsd;hp=d415ecdb5a2502ca16eb726ab02054b75c4a93a5;hpb=2c808a12ea7e00d5078e57a9640adcb0504c739c;p=karo-tx-uboot.git

diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index d415ecdb5a..4211e72dba 100644
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -15,6 +15,8 @@
 #define __CONFIG_H
 
 #define CONFIG_MECP5123 1
+#define CONFIG_DISPLAY_BOARDINFO
+
 /*
  * Memory map for the MECP5123 board:
  *
@@ -29,7 +31,6 @@
  * High Level Configuration Options
  */
 #define CONFIG_E300		1	/* E300 Family */
-#define CONFIG_MPC512X		1	/* MPC512X family */
 
 #define	CONFIG_SYS_TEXT_BASE	0xFFF00000
 
@@ -241,12 +242,7 @@
 #define SCCR2_CLOCKS_EN	(CLOCK_SCCR2_MEM_EN |	\
 			 CLOCK_SCCR2_I2C_EN)
 
-
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#ifdef  CONFIG_SYS_HUSH_PARSER
-#endif
 
 /* I2C */
 #define CONFIG_HARD_I2C			/* I2C with hardware support */
@@ -294,23 +290,12 @@
 #define CONFIG_LOADS_ECHO		/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change	*/
 
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_DATE
 #undef CONFIG_CMD_FUSE
 #undef CONFIG_CMD_IDE
-#undef CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_ELF
 #define CONFIG_DOS_PARTITION
 
 /*
@@ -377,7 +362,6 @@
 
 #define CONFIG_LOADADDR		400000	/* def. location for tftp and bootm */
 
-#define CONFIG_BOOTDELAY	5	/* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS			/* the boot command will set bootargs*/
 
 #define CONFIG_PREBOOT	"echo;"	\
@@ -430,9 +414,6 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-
 #define OF_CPU			"PowerPC,5121@0"
 #define OF_SOC_COMPAT		"fsl,mpc5121-immr"
 #define OF_TBCLK		(bd->bi_busfreq / 4)