X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx25pdk.h;h=af6aafaf1c6257a3287c57579b780777232095ba;hb=a891601ce51edbafa1a2750c96a618e4fcbca1c2;hp=8414376edd9b22d16b5da189394a06faece6eb4c;hpb=31a4f1e5b6ee9b6335f0313dce7637cef887f84f;p=karo-tx-uboot.git

diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
index 8414376edd..af6aafaf1c 100644
--- a/include/configs/mx25pdk.h
+++ b/include/configs/mx25pdk.h
@@ -1,25 +1,23 @@
 /*
  * (C) Copyright 2011 Freescale Semiconductor, Inc.
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <asm/arch/imx-regs.h>
+
 /* High Level Configuration Options */
 
-#define CONFIG_MX25_CLK32		32768	/* OSC32K frequency */
-#define CONFIG_SYS_HZ			1000
+#define CONFIG_MX25
 #define CONFIG_SYS_TEXT_BASE		0x81200000
+#define CONFIG_MXC_GPIO
+
+#define CONFIG_SYS_TIMER_RATE		32768
+#define CONFIG_SYS_TIMER_COUNTER	\
+	(&((struct gpt_regs *)IMX_GPT1_BASE)->counter)
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
@@ -40,35 +38,36 @@
 #define PHYS_SDRAM_1_SIZE	(64 * 1024 * 1024)
 
 #define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - \
-						GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR	IMX_RAM_BASE
+#define CONFIG_SYS_INIT_RAM_SIZE	IMX_RAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* Memory Test */
 #define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE/2)
 #define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)
 
-/* Stack sizes */
-#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */
-
 /* Serial Info */
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX25_UART1
+#define CONFIG_MXC_UART_BASE	UART1_BASE
 #define CONFIG_CONS_INDEX	1	/* use UART0 for console */
 #define CONFIG_BAUDRATE		115200	/* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /* No NOR flash present */
 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
 #define CONFIG_ENV_SIZE        (8 * 1024)
-#define CONFIG_ENV_IS_NOWHERE
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_64BIT_VSPRINTF
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
 
 /* U-Boot general configuration */
-#define CONFIG_SYS_PROMPT	"MX25PDK U-Boot > "
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size  */
 /* Print buffer sz */
@@ -82,7 +81,12 @@
 
 /* U-Boot commands */
 #include <config_cmd_default.h>
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_CACHE
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
 
 /* Ethernet */
 #define CONFIG_FEC_MXC
@@ -91,7 +95,39 @@
 #define CONFIG_CMD_NET
 #define CONFIG_ENV_OVERWRITE
 
-#define CONFIG_BOOTDELAY	3
+/* ESDHC driver */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CONFIG_SYS_FSL_ESDHC_NUM	1
+
+/* PMIC Configs */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_FSL
+#define CONFIG_PMIC_FSL_MC34704
+#define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x54
+
+#define CONFIG_DOS_PARTITION
+
+/* I2C Configs */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+
+/* RTC */
+#define CONFIG_RTC_IMXDI
+#define CONFIG_CMD_DATE
+
+/* Ethernet Configs */
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+
+#define CONFIG_BOOTDELAY	1
 
 #define CONFIG_LOADADDR		0x81000000	/* loadaddr env var */
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR