X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx6sxsabresd.h;h=61c1d2b7ec26651e8dfab68367572515ecd94b7e;hb=ec712d1a32f9583383abf01edaef467c6f8225b9;hp=1eda65e0818c5323a2d0c48094f5916affd5d730;hpb=8f005b3918cc16bb3e8f6d7228c27d207f4c606f;p=karo-tx-uboot.git

diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index 1eda65e081..61c1d2b7ec 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -14,10 +14,15 @@
 #include <linux/sizes.h>
 #include "mx6_common.h"
 
-#define CONFIG_MX6
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
+#ifdef CONFIG_SPL
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#include "imx6_spl.h"
+#endif
+
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -28,7 +33,6 @@
 #define CONFIG_SYS_MALLOC_LEN		(3 * SZ_1M)
 
 #define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_MXC_GPIO
 
 #define CONFIG_MXC_UART
@@ -59,7 +63,7 @@
 	"fdt_addr=0x88000000\0" \
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
-	"mmcdev=0\0" \
+	"mmcdev=2\0" \
 	"mmcpart=1\0" \
 	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
@@ -159,7 +163,7 @@
 /* MMC Configuration */
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_USDHC
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC4_BASE_ADDR
 
 #define CONFIG_MMC
 #define CONFIG_CMD_MMC
@@ -198,13 +202,66 @@
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
+
+#define CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS   0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#endif
+
+#define CONFIG_CMD_PCI
+#ifdef CONFIG_CMD_PCI
+#define CONFIG_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_PCIE_IMX
+#define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(2, 0)
+#define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(2, 1)
+#endif
+
+#define CONFIG_DM
+#define CONFIG_DM_THERMAL
+#define CONFIG_SYS_MALLOC_F_LEN	(1 << 10)
+#define CONFIG_IMX6_THERMAL
+
+#define CONFIG_CMD_FUSE
+#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
+#define CONFIG_MXC_OCOTP
+#endif
+
 /* FLASH and environment organization */
 #define CONFIG_SYS_NO_FLASH
 
+#define CONFIG_CMD_TIME
+
+#define CONFIG_FSL_QSPI
+
+#ifdef CONFIG_FSL_QSPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_BAR
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SYS_FSL_QSPI_LE
+#define CONFIG_SYS_FSL_QSPI_AHB
+#ifdef CONFIG_MX6SX_SABRESD_REVA
+#define FSL_QSPI_FLASH_SIZE		SZ_16M
+#else
+#define FSL_QSPI_FLASH_SIZE		SZ_32M
+#endif
+#define FSL_QSPI_FLASH_NUM		2
+#endif
+
 #define CONFIG_ENV_OFFSET		(6 * SZ_64K)
 #define CONFIG_ENV_SIZE			SZ_8K
 #define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV		0
 
 #define CONFIG_OF_LIBFDT
 #define CONFIG_CMD_BOOTZ
@@ -213,4 +270,9 @@
 #define CONFIG_CMD_CACHE
 #endif
 
+#define CONFIG_SYS_FSL_USDHC_NUM	3
+#if defined(CONFIG_ENV_IS_IN_MMC)
+#define CONFIG_SYS_MMC_ENV_DEV		2  /*USDHC4*/
+#endif
+
 #endif				/* __CONFIG_H */