X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_beagle.h;h=8ebb5bd2a3d50a6ba59400899cd4c0c632f000cd;hb=717626fd1cd3a9dd3de451405d97f67a7c707d89;hp=0a7df60f2815276aec98c113a1ae8a8a99355009;hpb=3eb5e198632dcc3e03b5742d1e0ebced0ef2f551;p=karo-tx-uboot.git

diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 0a7df60f28..8ebb5bd2a3 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -68,7 +68,7 @@
 #define CONFIG_USB_ETHER_RNDIS
 #define CONFIG_USB_GADGET
 #define CONFIG_USB_GADGET_VBUS_DRAW	0
-#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_G_DNL_VENDOR_NUM		0x0451
 #define CONFIG_G_DNL_PRODUCT_NUM	0xd022
 #define CONFIG_G_DNL_MANUFACTURER	"TI"
@@ -95,8 +95,6 @@
 #define CONFIG_OMAP3_GPIO_6		/* GPIO160..191 is in GPIO bank 6 */
 
 /* commands to include */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_ASKENV
 
 #define CONFIG_CMD_CACHE
@@ -109,8 +107,8 @@
 #define CONFIG_USB_STORAGE	/* USB storage support		*/
 #define CONFIG_CMD_NAND		/* NAND support			*/
 #define CONFIG_CMD_LED		/* LED support			*/
-#define CONFIG_CMD_SETEXPR	/* Evaluate expressions		*/
 #define CONFIG_CMD_GPIO     /* Enable gpio command */
+#define CONFIG_CMD_DHCP
 
 #define CONFIG_VIDEO_OMAP3	/* DSS Support			*/
 
@@ -194,7 +192,7 @@
 	"bootenv=uEnv.txt\0" \
 	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
 	"importbootenv=echo Importing environment from mmc ...; " \
-		"env import -t $loadaddr $filesize\0" \
+		"env import -t -r $loadaddr $filesize\0" \
 	"ramargs=setenv bootargs console=${console} " \
 		"${optargs} " \
 		"mpurate=${mpurate} " \
@@ -206,6 +204,9 @@
 		"rootfstype=${ramrootfstype}\0" \
 	"loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \
 	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+	"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
+		"source ${loadaddr}\0" \
 	"loadfdt=run validatefdt; load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
@@ -242,9 +243,13 @@
 			"echo Running uenvcmd ...;" \
 			"run uenvcmd;" \
 		"fi;" \
-		"if run loadimage; then " \
-			"run mmcboot;" \
-		"fi;" \
+		"if run loadbootscript; then " \
+			"run bootscript; " \
+		"else " \
+			"if run loadimage; then " \
+				"run mmcboot;" \
+			"fi;" \
+		"fi; " \
 	"fi;" \
 	"run nandboot;" \
 	"setenv bootfile zImage;" \
@@ -265,13 +270,8 @@
  */
 
 /* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE		GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE		GPMC_SIZE_128M
-
 #if defined(CONFIG_CMD_NAND)
-#define CONFIG_SYS_FLASH_BASE		PISMO1_NAND_BASE
+#define CONFIG_SYS_FLASH_BASE		NAND_BASE
 #endif
 
 /* Monitor at start of flash */
@@ -295,6 +295,7 @@
 #define CONFIG_SPL_OMAP3_ID_NAND
 
 /* NAND boot config */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT	16
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
@@ -307,5 +308,11 @@
 #define CONFIG_SYS_NAND_ECCBYTES	3
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_HW
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
+/* NAND: SPL falcon mode configs */
+#ifdef CONFIG_SPL_OS_BOOT
+#define CONFIG_CMD_SPL_NAND_OFS		0x240000
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x280000
+#define CONFIG_CMD_SPL_WRITE_SIZE	0x2000
+#endif
 
 #endif /* __CONFIG_H */