X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=include%2Fconfigs%2Fr7780mp.h;h=8156724f7f6c3d63f68b87be06a78637abc9154e;hb=e6fe4bd989b93b1f37a25771fc14478dd33aa0df;hp=72a3b5c8b1f22b927b00e484b699bf68ff987190;hpb=9eb468da3fd8753de55ab271d6ff5ed7f36d7ea2;p=karo-tx-uboot.git

diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
index 72a3b5c8b1..8156724f7f 100644
--- a/include/configs/r7780mp.h
+++ b/include/configs/r7780mp.h
@@ -4,31 +4,13 @@
  * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
  * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __R7780RP_H
 #define __R7780RP_H
 
 #undef DEBUG
-#define CONFIG_SH		1
-#define CONFIG_SH4A		1
 #define CONFIG_CPU_SH7780	1
 #define CONFIG_R7780MP		1
 #define CONFIG_SYS_R7780MP_OLD_FLASH	1
@@ -60,20 +42,18 @@
 /* check for keypress on bootdelay==0 */
 /*#define CONFIG_ZERO_BOOTDELAY_CHECK*/
 
+#define CONFIG_SYS_TEXT_BASE		0x0FFC0000
 #define CONFIG_SYS_SDRAM_BASE		(0x08000000)
 #define CONFIG_SYS_SDRAM_SIZE		(128 * 1024 * 1024)
 
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT		"=> "
 #define CONFIG_SYS_CBSIZE		256
 #define CONFIG_SYS_PBSIZE		256
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_BARGSIZE	512
-/* List of legal baudrate settings for this board */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
 
 #define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END		(TEXT_BASE - 0x100000)
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_TEXT_BASE - 0x100000)
 
 /* Flash board support */
 #define CONFIG_SYS_FLASH_BASE		(0xA0000000)
@@ -100,8 +80,6 @@
 /* Size of DRAM reserved for malloc() use */
 #define CONFIG_SYS_MALLOC_LEN		(1204 * 1024)
 
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	(256)
 #define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
 #define CONFIG_SYS_RX_ETH_BUFFER	(8)
 
@@ -121,14 +99,18 @@
 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
-#define TMU_CLK_DIVIDER		4
-#define CONFIG_SYS_HZ	(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
+#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_TMU_CLK_DIV		4
 
 /* PCI Controller */
 #if defined(CONFIG_CMD_PCI)
 #define CONFIG_PCI
 #define CONFIG_SH4_PCI
 #define CONFIG_SH7780_PCI
+#define CONFIG_SH7780_PCI_LSR	0x07f00001
+#define CONFIG_SH7780_PCI_LAR	CONFIG_SYS_SDRAM_SIZE
+#define CONFIG_SH7780_PCI_BAR	CONFIG_SYS_SDRAM_SIZE
 #define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW	1
 #define __io
@@ -141,15 +123,16 @@
 #define CONFIG_PCI_IO_BUS	0xFE200000	/* IO space base address */
 #define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE	0x00200000	/* Size of IO window */
+#define CONFIG_PCI_SYS_PHYS CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_BUS  CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE
 #endif /* CONFIG_CMD_PCI */
 
 #if defined(CONFIG_CMD_NET)
 /*
-#define CONFIG_NET_MULTI
 #define CONFIG_RTL8169
 */
-/* AX88696L Support(NE2000 base chip) */
-#define CONFIG_DRIVER_NE2000
+/* AX88796L Support(NE2000 base chip) */
 #define CONFIG_DRIVER_AX88796L
 #define CONFIG_DRIVER_NE2000_BASE	0xA4100000
 #endif
@@ -165,6 +148,7 @@
 #define CONFIG_SYS_ATA_DATA_OFFSET     0x1000          /* data reg offset */
 #define CONFIG_SYS_ATA_REG_OFFSET      0x1000          /* reg offset */
 #define CONFIG_SYS_ATA_ALT_OFFSET      0x800           /* alternate register offset */
+#define CONFIG_IDE_SWAP_IO
 #endif /* CONFIG_CMD_IDE */
 
 #endif /* __R7780RP_H */